HALO- AND SOLVATO-FLUOROCHROMIC POLYMER NANOASSEMBLIES FOR CANCER THERANOSTICS

Theranostics is an emerging treatment approach that combines diagnostics with therapy in order to personalize treatment regimens for individual patients and decrease cancer mortality. Previously, nanoparticles entrapping conventional fluorescent dyes were developed for cancer theranostics, but fluorescent nanoparticles did not allow clinicians to significantly improve cancer treatments. The use of fluorescent dyes that are sensitive to solvent acidity (halo-fluorochromism) and polarity (solvato-fluorochromism) may overcome the limitations of fluorescent nanoparticles and improve cancer therapy by enabling researchers to detect chemical properties within the nanoparticle core environment. The model halo- and solvato-fluorochromic dye Nile blue was attached to the core of nanoscale drug delivery systems called polymer nanoassemblies (PNAs), which were created by tethering hydrophilic polymers and hydrophobic groups to a cationic polymer scaffold. The fluorescence of empty PNAs increased by 100% at pH 5.0 compared to pH 7.4, and the fluorescence of drug-loaded PNAs increased up to 300% compared to empty PNAs. A comparison of the fluorochromic properties between PNAs with various core properties indicated that both hydrophobic pendant groups and scaffold amines contributed to the fluorochromism of PNAs. The halo-fluorochromism of PNAs allowed investigators to minimize the detection of fluorescence signals in healthy organs such as the liver. Fluorescence imaging of halo-fluorochromic PNAs diffused into tissue mimics indicated that fluorescence of PNAs in tissues increased by 100% at pH 7.0 compared to pH 7.4. In addition, halo-fluorochromic PNAs identified the acidic perimeter surrounding metastatic tumors in orthotopic metastatic tumor models. Computational simulations of metastatic lesions verified that some halo-fluorochromic PNAs accumulate in the hypoxic/acidic regions of metastatic tumors following intravenous administration. These simulations also indicated that the accumulation of PNAs in the hypoxic regions of tumors doubles at 12 hours post-treatment compared to 1.8 hours post-treatment. The solvato-fluorochromism of PNAs enabled the fluorescence-based measurement of drug release from the nanoassembly core during dialysis-based drug release measurements. Solvato-fluorochromic methods indicated faster drug release rates than HPLC-based methods. Mechanistic modeling of drug release indicated that solvato-fluorochromic methods were unaffected by released drugs that interfered with HPLC-based methods. However, mechanistic modeling also indicated that drug rebinding and diffusion did not account for all of the differences between drug release rates determined by solvato-fluorochromic- and HPLC-based methods. Based on this evidence, it was hypothesized that solvato-fluorochromic drug release methods measure drug diffusion from near the scaffold of PNAs in a small region of the nanoassembly core, and that this process contributes to overall drug release but does not indicate apparent drug release rates for PNAs. In order to develop PNAs for potential clinical applications, ionizable amines were removed from the polymer scaffold to increase drug loading and sustain the release of model drugs carfilzomib and docetaxel. The removal of primary amines decreased drug diffusivity in the core of PNAs (D from 3.9*10-18 cm2/s to 0.1*10-19 cm2/s) and increased the drug release half-life (t1/2 from 4 to 26 hours). The controlled release of carfilzomib from PNAs reduced drug metabolism by 60% for up to one hour and sustained proteasome inhibition in cancer cells at 72 h post-treatment compared to free drug. Overall, this work provides insight into the design of theranostic nanoparticles with beneficial properties for improving cancer treatment

Polymer Nanoassemblies with Hydrophobic Pendant Groups in the Core Induce False Positive siRNA Transfection in Luciferase Reporter Assays

Poly(ethylene glycol)-conjugated polyethylenimine (PEG-PEI) is a widely studied cationic polymer used to develop non-viral vectors for siRNA therapy of genetic disorders including cancer. Cell lines stably expressing luciferase reporter protein typically evaluate the transfection efficacy of siRNA/PEG-PEI complexes, however recent findings revealed that PEG-PEI can reduce luciferase expression independent of siRNA. This study elucidates a cause of the false positive effect in luciferase assays by using polymer nanoassemblies (PNAs) made from PEG, PEI, poly-(L-lysine) (PLL), palmitate (PAL), and deoxycholate (DOC): PEG-PEI (2P), PEG-PEI-PAL (3P), PEG-PLL (2P′), PEG-PLL-PAL (3P′), and PEG-PEI-DOC (2PD). In vitro transfection and western blot assays of luciferase using a colorectal cancer cell line expressing luciferase (HT29/LUC) concluded that 2P and 2P′ caused no luciferase expression reduction while hydrophobically modified PNAs induced a 35-50% reduction (3P′ \u3c 2PD \u3c 3P). Although cell viability remained stagnant, 3P triggered cellular stress responses including increased membrane porosity and decreased ATP and cellular protein concentrations. Raman spectroscopy suggested that hydrophobic groups influence PNA conformation changes, which may have caused over-ubiquitination and degradation of luciferase in the cells. These results indicate that hydrophobically modified PEG-PEI induces cellular distress causing over-ubiquitination of the luciferase protein, producing false positive siRNA transfection in the luciferase assay

Development of Halofluorochromic Polymer Nanoassemblies for the Potential Detection of Liver Metastatic Colorectal Cancer Tumors Using Experimental and Computational Approaches

Purpose—To develop polymer nanoassemblies (PNAs) modified with halofluorochromic dyes to allow for the detection of liver metastatic colorectal cancer (CRC) to improve therapeutic outcomes. Methods—We combine experimental and computational approaches to evaluate macroscopic and microscopic PNA distributions in patient-derived xenograft primary and orthotropic liver metastatic CRC tumors. Halofluorochromic and non-halofluorochromic PNAs (hfPNAs and n-hfPNAs) were prepared from poly(ethylene glycol), fluorescent dyes (Nile blue, Alexa546, and IR820), and hydrophobic groups (palmitate), all of which were covalently tethered to a cationic polymer scaffold [poly(ethylene imine) or poly(lysine)] forming particles with an average diameter \u3c 30 nm. Results—Dye-conjugated PNAs showed no aggregation under opsonizing conditions for 24 h and displayed low tissue diffusion and cellular uptake. Both hfPNAs and n-hfPNAs accumulated in primary and liver metastatic CRC tumors within 12 h post intravenous injection. In comparison to n-hfPNAs, hfPNAs fluoresced strongly only in the acidic tumor microenvironment (pH \u3c 7.0) and distinguished small metastatic CRC tumors from healthy liver stroma. Computational simulations revealed that PNAs would steadily accumulate mainly in acidic (hypoxic) interstitium of metastatic tumors, independently of the vascularization degree of the tissue surrounding the lesions. Conclusion—The combined experimental and computational data confirms that hfPNAs detecting acidic tumor tissue can be used to identify small liver metastatic CRC tumors with improved accuracy

Polymer Micelle Formulation for the Proteasome Inhibitor Drug Carfilzomib: Anticancer Efficacy and Pharmacokinetic Studies in Mice

Carfilzomib (CFZ) is a peptide epoxyketone proteasome inhibitor approved for the treatment of multiple myeloma (MM). Despite the remarkable efficacy of CFZ against MM, the clinical trials in patients with solid cancers yielded rather disappointing results with minimal clinical benefits. Rapid degradation of CFZ in vivo and its poor penetration to tumor sites are considered to be major factors limiting its efficacy against solid cancers. We previously reported that polymer micelles (PMs) composed of biodegradable block copolymers poly(ethylene glycol) (PEG) and poly(caprolactone) (PCL) can improve the metabolic stability of CFZ in vitro. Here, we prepared the CFZ-loaded PM, PEG-PCL-deoxycholic acid (CFZ-PM) and assessed its in vivo anticancer efficacy and pharmacokinetic profiles. Despite in vitro metabolic protection of CFZ, CFZ-PM did not display in vivo anticancer efficacy in mice bearing human lung cancer xenograft (H460) superior to that of the clinically used cyclodextrin-based CFZ (CFZ-CD) formulation. The plasma pharmacokinetic profiles of CFZ-PM were also comparable to those of CFZ-CD and the residual tumors that persisted in xenograft mice receiving CFZ-PM displayed an incomplete proteasome inhibition. In summary, our results showed that despite its favorable in vitroperformances, the current CFZ-PM formulation did not improve in vivo anticancer efficacy and accessibility of active CFZ to solid cancer tissues over CFZ-CD. Careful consideration of the current results and potential confounding factors may provide valuable insights into the future efforts to validate the potential of CFZ-based therapy for solid cancer and to develop effective CFZ delivery strategies that can be used to treat solid cancers

Ex Vivo and in Vivo Evaluation of Dodecaborate-Based Clusters Encapsulated in Ferumoxytol Nanoparticles

Host-guest interactions represent a growing research area with recent work demonstrating an ability to chemically manipulate both host molecules as well as guest molecules to vary the type and strength of bonding. Much less is known about the interactions of guest molecules and hybrid materials containing similar chemical features to typical macrocyclic hosts. This work uses in vitro and in vivo kinetic analyses to investigate the interaction of closo-dodecahydrododecaborate derivatives with ferumoxytol, an iron oxide nanoparticle with a carboxylated dextran coating. We find that several boron cluster derivatives can become encapsulated into ferumoxytol and the lack of pH dependence in these interactions suggests that ion pairing, hydrophobic/hydrophilic, or hydrogen bonding are not the driving force for encapsulation in this system. Biodistribution experiments in BALB/c mice show that this system is nontoxic at the reported dosage and demonstrate that encapsulation of dodecaborate-based clusters in ferumoxytol can alter the biodistribution of guest molecules

ILC Reference Design Report Volume 1 - Executive Summary

The International Linear Collider (ILC) is a 200-500 GeV center-of-mass high-luminosity linear electron-positron collider, based on 1.3 GHz superconducting radio-frequency (SCRF) accelerating cavities. The ILC has a total footprint of about 31 km and is designed for a peak luminosity of 2x10^34 cm^-2s^-1. This report is the Executive Summary (Volume I) of the four volume Reference Design Report. It gives an overview of the physics at the ILC, the accelerator design and value estimate, the detector concepts, and the next steps towards project realization.The International Linear Collider (ILC) is a 200-500 GeV center-of-mass high-luminosity linear electron-positron collider, based on 1.3 GHz superconducting radio-frequency (SCRF) accelerating cavities. The ILC has a total footprint of about 31 km and is designed for a peak luminosity of 2x10^34 cm^-2s^-1. This report is the Executive Summary (Volume I) of the four volume Reference Design Report. It gives an overview of the physics at the ILC, the accelerator design and value estimate, the detector concepts, and the next steps towards project realization

ILC Reference Design Report Volume 4 - Detectors

This report, Volume IV of the International Linear Collider Reference Design Report, describes the detectors which will record and measure the charged and neutral particles produced in the ILC's high energy e+e- collisions. The physics of the ILC, and the environment of the machine-detector interface, pose new challenges for detector design. Several conceptual designs for the detector promise the needed performance, and ongoing detector R&D is addressing the outstanding technological issues. Two such detectors, operating in push-pull mode, perfectly instrument the ILC interaction region, and access the full potential of ILC physics.This report, Volume IV of the International Linear Collider Reference Design Report, describes the detectors which will record and measure the charged and neutral particles produced in the ILC's high energy e+e- collisions. The physics of the ILC, and the environment of the machine-detector interface, pose new challenges for detector design. Several conceptual designs for the detector promise the needed performance, and ongoing detector R&D is addressing the outstanding technological issues. Two such detectors, operating in push-pull mode, perfectly instrument the ILC interaction region, and access the full potential of ILC physics

ILC Reference Design Report Volume 3 - Accelerator

The International Linear Collider (ILC) is a 200-500 GeV center-of-mass high-luminosity linear electron-positron collider, based on 1.3 GHz superconducting radio-frequency (SCRF) accelerating cavities. The ILC has a total footprint of about 31 km and is designed for a peak luminosity of 2x10^34 cm^-2 s^-1. The complex includes a polarized electron source, an undulator-based positron source, two 6.7 km circumference damping rings, two-stage bunch compressors, two 11 km long main linacs and a 4.5 km long beam delivery system. This report is Volume III (Accelerator) of the four volume Reference Design Report, which describes the design and cost of the ILC.The International Linear Collider (ILC) is a 200-500 GeV center-of-mass high-luminosity linear electron-positron collider, based on 1.3 GHz superconducting radio-frequency (SCRF) accelerating cavities. The ILC has a total footprint of about 31 km and is designed for a peak luminosity of 2x10^34 cm^-2 s^-1. The complex includes a polarized electron source, an undulator-based positron source, two 6.7 km circumference damping rings, two-stage bunch compressors, two 11 km long main linacs and a 4.5 km long beam delivery system. This report is Volume III (Accelerator) of the four volume Reference Design Report, which describes the design and cost of the ILC