438 research outputs found
A statistical analysis of Pc1–2 waves at a near-cusp station in Antarctica
Abstract A statistical study of Pc1–2 waves at southern polar latitudes is presented. Ultra-low frequency geomagnetic field measurements collected at the Italian station Mario Zucchelli (Terra Nova Bay, Antarctica, altitude-adjusted corrected geomagnetic latitude 80°S, MLT = UT − 8) from 2003 to 2010 corresponding with the declining phase of solar cycle 23 and the onset of the solar cycle 24 are used. The long data series allows us to analyze the solar cycle, seasonal and magnetic local time dependence and investigate the possible generation processes related to the solar wind–magnetosphere interaction. We found that during the day, Pc1–2 waves occur around local magnetic noon and midnight. Polarized waves show an almost linear polarization, suggesting a wave propagation along a meridional ionospheric waveguide, from the injection region up to the latitude of Terra Nova Bay. The origin of the waves appears to be due to substorm/stormrelated instabilities and, in the dayside, to solar wind compressions of the magnetopause. Based on these results, we propose a simple model to estimate Pc1–2 power variations depending on geomagnetic activity and solar wind density
Penerapan Lean Canvas Pada Startup Pembelajaran Bahasa Inggris Lunchat
Lunchat merupakan sebuah startup di bidang pendidikan yang menciptakan sebuah aplikasi kursus bahasa Inggris berbasis website yang dapat mempermudah masyarakat Indonesia dalam belajar bahasa Inggris. Tujuan dari penelitian ini adalah untuk menentukan dan mempertajam model bisnis yang diterapkan di startup Lunchat. Metode pengembangan sistem yang digunakan pada penelitian ini adalah menggunakan metode lean canvas sebagai analisis bisnis. Dengan penerapan lean canvas dapat memudahkan pembuat dalam melakukan proses validasi, karena dapat melihat model bisnis secara keseluruhan, sehingga dapat mengurangi resiko dalam melakukan bisnis. Hal ini karena antara produk atau jasa yang ditawarkan sesuai dengan yang diinginkan oleh pasar. Hasil dari implementasi startup Lunchat menjadikan suatu peluang yang menjanjikan untuk memperluas sektor usaha sehingga Lunchat dapat bersaing di era Industry 4.0 ini
Application of RAPD markers in hybrid verification in coconut
Abstract -Coconut palms are classified into two majo
Algebraic Comparison of Partial Lists in Bioinformatics
The outcome of a functional genomics pipeline is usually a partial list of
genomic features, ranked by their relevance in modelling biological phenotype
in terms of a classification or regression model. Due to resampling protocols
or just within a meta-analysis comparison, instead of one list it is often the
case that sets of alternative feature lists (possibly of different lengths) are
obtained. Here we introduce a method, based on the algebraic theory of
symmetric groups, for studying the variability between lists ("list stability")
in the case of lists of unequal length. We provide algorithms evaluating
stability for lists embedded in the full feature set or just limited to the
features occurring in the partial lists. The method is demonstrated first on
synthetic data in a gene filtering task and then for finding gene profiles on a
recent prostate cancer dataset
Building solids inside nano-space: from confined amorphous through confined solvate to confined ‘metastable’ polymorph
The nanocrystallisation of complex molecules inside mesoporous hosts and control over the resulting structure is a significant challenge. To date the largest organic molecule crystallised inside the nano-pores is a known pharmaceutical intermediate – ROY (259.3 g mol1). In this work we demonstrate smart manipulation of the phase of a larger confined pharmaceutical – indomethacin (IMC, 357.8 g mol1), a substance with known conformational flexibility and complex polymorphic behaviour. We show the detailed structural analysis and the control of solid state transformations of encapsulated molecules inside the pores of mesoscopic cellular foam (MCF, pore size ca. 29 nm) and controlled pore glass (CPG, pore size ca. 55 nm). Starting from confined amorphous IMC we drive crystallisation into a confined methanol solvate, which upon vacuum drying leads to the stabilised rare form V of IMC inside the MCF host. In contrast to the pure form, encapsulated form V does not transform into a more stable polymorph upon heating. The size of the constraining pores and the drug concentration within the pores determine whether the amorphous state of the drug is stabilised or it recrystallises into confined nanocrystals. The work presents, in a critical manner, an application of complementary techniques (DSC, PXRD, solid-state NMR, N2 adsorption) to confirm unambiguously the phase transitions under confinement and offers a comprehensive strategy towards the formation and control of nano-crystalline encapsulated organic solids
FOLFIRINOX after first-line gemcitabine-based chemotherapy in advanced pancreatic cancer: a retrospective comparison with FOLFOX and FOLFIRI schedules
Background: Pancreatic adenocarcinoma is the fourth leading cause of cancer-related death. In cases with metastasis, the combination of 5-fluorouracil, irinotecan, and oxaliplatin (FOLFIRINOX) or gemcitabine-based chemotherapy regimens are considered the standard of care. However, the optimal sequence of these regimens is unclear. Methods: This retrospective study initially evaluated 186 patients with locally advanced/metastatic pancreatic cancer at three Italian institutions between February 2013 and October 2019. All patients had progressed after receiving gemcitabine-based first-line chemotherapy and were subsequently offered second-line FOLFIRINOX, FOLFOX-6, or FOLFIRI treatment. This study evaluated progression-free survival (PFS), overall survival from the start of second-line treatment (OS2), overall survival from the start of first-line treatment (OS1), and safety outcomes. Results: A total of 77 patients received ⩾4 cycles of second-line chemotherapy and were considered eligible: 15 patients received FOLFIRINOX, 32 patients received FOLFOX-6, and 30 patients received FOLFIRI. The FOLFIRINOX group had median PFS of 26.29 weeks and median OS2 of 47.86 weeks, while the FOLFIRI group had median PFS of 10.57 weeks and median OS2 of 25.00 weeks (p = 0.038). No significant differences were observed between the FOLFIRINOX and FOLFOX-6 groups in terms of PFS (26.29 weeks versus 23.07 weeks) or OS2 (47.86 weeks versus 42.00 weeks). The most common grade 3–4 toxicities were anemia, neutropenia, and thrombocytopenia, which occurred more frequently in the FOLFIRINOX and FOLFOX-6 groups. Conclusion: Relative to the FOLFIRI regimen, the FOLFIRINOX regimen had a favorable toxicity profile and better survival outcomes. No significant differences were observed relative to the FOLFOX-6 regimen
Micro-computed tomography (μ-CT) as a potential tool to assess the effect of dynamic coating routes on the formation of biomimetic apatite layers on 3D-plotted biodegradable polymeric scaffolds
This work studies the influence of dynamic
biomimetic coating procedures on the growth of bonelike
apatite layers at the surface of starch/polycaprolactone
(SPCL) scaffolds produced by a 3D-plotting technology.
These systems are newly proposed for bone Tissue Engineering
applications. After generating stable apatite layers
through a sodium silicate-based biomimetic methodology the
scaffolds were immersed in Simulated Body Fluid solutions
(SBF) under static, agitation and circulating flow perfusion
conditions, for different time periods. Besides the typical
characterization techniques, Micro-Computed Tomography
analysis (μ-CT) was used to assess scaffold porosity and as a
new tool for mapping apatite content. 2D histomorphometric
analysis was performed and 3D virtual models were created
using specific softwares for CT reconstruction. By the proposed
biomimetic routes apatite layers were produced covering
the interior of the scaffolds, without compromising their
overall morphology and interconnectivity. Dynamic conditions
allowed for the production of thicker apatite layers as
consequence of higher mineralizing rates, when comparing
with static conditions. μ-CT analysis clearly demonstrated
that flow perfusion was the most effective condition in order
to obtain well-defined apatite layers in the inner parts
of the scaffolds. Together with SEM, this technique was a useful complementary tool for assessing the apatite content
in a non-destructive way
Bone Tissue Response to Porous and Functionalized Titanium and Silica Based Coatings
Background: Topography and presence of bio-mimetic coatings are known to improve osseointegration. The objective of this study was to evaluate the bone regeneration potential of porous and osteogenic coatings.
Methodology: Six-implants [Control (CTR); porous titanium coatings (T1, T2); thickened titanium (Ti) dioxide layer (TiO2); Amorphous Microporous Silica (AMS) and Bio-active Glass (BAG)] were implanted randomly in tibiae of 20-New Zealand white rabbits. The animals were sacrificed after 2 or 4 weeks. The samples were analyzed histologically and histomorphometrically. In the initial bone-free areas (bone regeneration areas (BRAs)), the bone area fraction (BAF) was evaluated in the whole cavity (500 mm, BAF-500), in the implant vicinity (100 mm, BAF-100) and further away (100–500 mm, BAF-400) from the implant. Bone-to-implant contact (BIC-BAA) was measured in the areas where the implants were installed in contact to the host bone (bone adaptation areas (BAAs)) to understand and compare the bone adaptation. Mixed models were used for statistical analysis.
Principal Findings: After 2 weeks, the differences in BAF-500 for different surfaces were not significant (p.0.05). After 4 weeks, a higher BAF-500 was observed for BAG than CTR. BAF-100 for AMS was higher than BAG and BAF-400 for BAG was higher than CTR and AMS. For T1 and AMS, the bone regeneration was faster in the 100-mm compared to the 400-mm zone. BIC-BAA for AMS and BAG was lower after 4 than 2 weeks. After 4 weeks, BIC-BAA for BAG was lower than AMS and CTR.
Conclusions: BAG is highly osteogenic at a distance from the implant. The porous titanium coatings didn’t stimulate bone regeneration but allowed bone growth into the pores. Although AMS didn’t stimulate higher bone response, it has a potential of faster bone growth in the vicinity compared to further away from the surface. BIC-BAA data were inconclusive to understand the bone adaptation.status: publishe
Detection of copy number variation from array intensity and sequencing read depth using a stepwise Bayesian model
Abstract Background Copy number variants (CNVs) have been demonstrated to occur at a high frequency and are now widely believed to make a significant contribution to the phenotypic variation in human populations. Array-based comparative genomic hybridization (array-CGH) and newly developed read-depth approach through ultrahigh throughput genomic sequencing both provide rapid, robust, and comprehensive methods to identify CNVs on a whole-genome scale. Results We developed a Bayesian statistical analysis algorithm for the detection of CNVs from both types of genomic data. The algorithm can analyze such data obtained from PCR-based bacterial artificial chromosome arrays, high-density oligonucleotide arrays, and more recently developed high-throughput DNA sequencing. Treating parameters--e.g., the number of CNVs, the position of each CNV, and the data noise level--that define the underlying data generating process as random variables, our approach derives the posterior distribution of the genomic CNV structure given the observed data. Sampling from the posterior distribution using a Markov chain Monte Carlo method, we get not only best estimates for these unknown parameters but also Bayesian credible intervals for the estimates. We illustrate the characteristics of our algorithm by applying it to both synthetic and experimental data sets in comparison to other segmentation algorithms. Conclusions In particular, the synthetic data comparison shows that our method is more sensitive than other approaches at low false positive rates. Furthermore, given its Bayesian origin, our method can also be seen as a technique to refine CNVs identified by fast point-estimate methods and also as a framework to integrate array-CGH and sequencing data with other CNV-related biological knowledge, all through informative priors.</p
A study of some fundamental physicochemical variables on the morphology of mesoporous silica nanoparticles MCM-41 type
[EN] All variables affecting the morphology of mesoporous silica nanoparticles (MSN) should be carefully analyzed in order to truly tailored design their mesoporous structure according to their final use. Although complete control on MCM-41 synthesis has been already claimed, reproducibility and repeatability of results remain a big issue due to the lack of information reported in literature. Stirring rate, reaction volume, and system configuration (i.e., opened or closed reactor) are three variables that are usually omitted, making the comparison of product characteristics difficult. Specifically, the rate of solvent evaporation is seldom disclosed, and its influence has not been previously analyzed. These variables were systematically studied in this work, and they were proven to have a fundamental impact on final particle morphology. Hence, a high degree of circularity (C = 0.97) and monodispersed particle size distributions were only achieved when a stirring speed of 500 rpm and a reaction scale of 500 mL were used in a partially opened system, for a 2 h reaction at 80 degrees C. Well-shaped spherical mesoporous silica nanoparticles with a diameter of 95 nm, a pore size of 2.8 nm, and a total surface area of 954 m(2) g(-1) were obtained. Final characteristics made this product suitable to be used in biomedicine and nanopharmaceutics, especially for the design of drug delivery systems.This study was funded partially by Departamento Administrativo de Ciencia Tecnología e Innovación–COLCIENCIAS (recipient, Angela A. Beltrán-Osuna); Ministerio de Economía y Competitividad, MINECO, research number MAT2016-76039-C4-1-R (Recipient, José L. Gómez-Ribelles); and Universidad Nacional de Colombia, grant number DIB201010021438 (Recipient, Jairo E. Perilla).Beltrán-Osuna, A.; Gómez Ribelles, JL.; Perilla-Perilla, JE. (2017). A study of some fundamental physicochemical variables on the morphology of mesoporous silica nanoparticles MCM-41 type. Journal of Nanoparticle Research. 19(12):1-14. https://doi.org/10.1007/s11051-017-4077-2S1141912Barrabino A (2011) Synthesis of mesoporous silica particles with control of both pore diameter and particle size. Master Thesis, Chalmers University of Technology, SwedenBastos FS, Lima OA, Filho CR, Fernandes LD (2011) Mesoporous molecular sieve MCM-41 synthesis from fluoride media. Brazilian. J Chem Eng 28:649–658Beck JS, Vartuli JC, Roth WJ, Leonowicz ME, Kresge CT, Schmitt KD, Chu CTW, Olson DH, Sheppard EW, McCullen SB, Higgins JB, Schlenker JL (1992) A new family of mesoporous molecular sieves prepared with liquid crystal templates. J Am Chem Soc 114(27):10834–10843. https://doi.org/10.1021/ja00053a020Beltrán-Osuna AA, Perilla JE (2016) Colloidal and spherical mesoporous silica particles: synthesis and new technologies for delivery applications. J Sol-Gel Sci Technol 77(2):480–496. https://doi.org/10.1007/s10971-015-3874-2Bernardos A, Mondragón L, Aznar E et al (2010) Enzyme-responsive intracellular controlled release using nanometric silica mesoporous supports capped with “saccharides”. ACS Nano 4(11):6353–6368. https://doi.org/10.1021/nn101499dBharti C, Nagaich U, Pal AK, Gulati N (2015) Mesoporous silica nanoparticles in target drug delivery system: a review. Int J Pharm Investig 5(3):124–133. https://doi.org/10.4103/2230-973X.160844Brevet D, Hocine O, Delalande A, Raehm L, Charnay C, Midoux P, Durand JO, Pichon C (2014) Improved gene transfer with histidine-functionalized mesoporous silica nanoparticles. Int J Pharm 471(1-2):197–205. https://doi.org/10.1016/j.ijpharm.2014.05.020Cai Q, Luo Z, Pang W et al (2001) Dilute solution routes to various controllable morphologies of MCM-41 silica with a basic medium. Chem Mater 13(2):258–263. https://doi.org/10.1021/cm990661zChakraborty I, Mascharak PK (2016) Mesoporous silica materials and nanoparticles as carriers for controlled and site-specific delivery of gaseous signaling molecules. Microporous Mesoporous Mater 234:409–419. https://doi.org/10.1016/j.micromeso.2016.07.028Chen L, Zhang Z, Yao X, Chen X, Chen X (2015a) Intracellular pH-operated mechanized mesoporous silica nanoparticles as potential drug carries. Microporous Mesoporous Mater 201:169–175. https://doi.org/10.1016/j.micromeso.2014.09.023Chen X, Yao X, Wang C, Chen L, Chen X (2015b) Mesoporous silica nanoparticles capped with fluorescence-conjugated cyclodextrin for pH-activated controlled drug delivery and imaging. Microporous Mesoporous Mater 217:46–53. https://doi.org/10.1016/j.micromeso.2015.06.012Chen Y, Chen H, Shi J (2013) In vivo bio-safety evaluations and diagnostic / therapeutic applications of chemically designed mesoporous silica nanoparticles. Adv Mater 25(23):3144–3176. https://doi.org/10.1002/adma.201205292Chen Y, Shi X, Han B, Qin H, Li Z, Lu Y, Wang J, Kong Y (2012) The complete control for the nanosize of spherical MCM-41. J Nanosci Nanotechnol 12(9):7239–7249. https://doi.org/10.1166/jnn.2012.6459Cheng Y-J, Zeng X, Cheng D-B, Xu XD, Zhang XZ, Zhuo RX, He F (2016) Functional mesoporous silica nanoparticles (MSNs) for highly controllable drug release and synergistic therapy. Colloids Surfaces B Biointerfaces 145:217–225. https://doi.org/10.1016/j.colsurfb.2016.04.051Crommelin DJA, Florence AT (2013) Towards more effective advanced drug delivery systems. Int J Pharm 454(1):496–511. https://doi.org/10.1016/j.ijpharm.2013.02.020Edler KJ (1997) Synthesis and characterisation of the mesoporous molecular sieve, MCM-41. Doctoral dissertation, The Australian National University, AustraliaGuo Z, Liu X-M, Ma L, Li J, Zhang H, Gao YP, Yuan Y (2013) Effects of particle morphology, pore size and surface coating of mesoporous silica on naproxen dissolution rate enhancement. Colloids Surf B Biointerfaces 101:228–235. https://doi.org/10.1016/j.colsurfb.2012.06.026Han N, Wang Y, Bai J, Liu J, Wang Y, Gao Y, Jiang T, Kang W, Wang S (2016) Facile synthesis of the lipid bilayer coated mesoporous silica nanocomposites and their application in drug delivery. Microporous Mesoporous Mater 219:209–218. https://doi.org/10.1016/j.micromeso.2015.08.006Hu X, Wang Y, Peng B (2014) Chitosan-capped mesoporous silica nanoparticles as pH-responsive nanocarriers for controlled drug release. Chem - An Asian J 9(1):319–327. https://doi.org/10.1002/asia.201301105Huh S, Wiench JW, Yoo J et al (2003) Organic functionalization and morphology control of mesoporous silicas via a co-condensation synthesis method. Chem Mater 15(22):4247–4256. https://doi.org/10.1021/cm0210041Ikari K, Suzuki K, Imai H (2006) Structural control of mesoporous silica nanoparticles in a binary surfactant system. Langmuir 22(2):802–806. https://doi.org/10.1021/la0525527Iliade P, Miletto I, Coluccia S, Berlier G (2012) Functionalization of mesoporous MCM-41 with aminopropyl groups by co-condensation and grafting: a physico-chemical characterization. Res Chem Intermed 38(3-5):785–794. https://doi.org/10.1007/s11164-011-0417-5IUPAC (1985) Reporting physisorption data for gas/solid systems. Pure Appl Chem 57:603–619IUPAC (2014) Compendium of chemical terminology-gold book, 2.3.3. International Union of Pure and Applied ChemistryKhezri K, Roghani-Mamaqani H, Sarsabili M, Sobani M, Mirshafiei-Langari SA (2014) Spherical mesoporous silica nanoparticles/tailor-made polystyrene nanocomposites by in situ reverse atom transfer radical polymerization. Polym Sci Ser B 56(6):909–918. https://doi.org/10.1134/S1560090414660026Kresge CT, Leonowicz ME, Roth WJ, Vartuli JC, Beck JS (1992) Ordered mesoporous molecular sieves synthesized by a liquid-crystal template mechanism. Nature 359(6397):710–712. https://doi.org/10.1038/359710a0Lelong G, Bhattacharyya S, Kline S, Cacciaguerra T, Gonzalez MA, Saboungi ML (2008) Effect of surfactant concentration on the morphology and texture of MCM-41 materials. J Phys Chem C 112(29):10674–10680. https://doi.org/10.1021/jp800898nLv X, Zhang L, Xing F, Lin H (2016) Controlled synthesis of monodispersed mesoporous silica nanoparticles: particle size tuning and formation mechanism investigation. Microporous Mesoporous Mater 225:238–244. https://doi.org/10.1016/j.micromeso.2015.12.024Mamaeva V, Sahlgren C, Lindén M (2013) Mesoporous silica nanoparticles in medicine: recent advances. Adv Drug Deliv Rev 65(5):689–702. https://doi.org/10.1016/j.addr.2012.07.018Manzano M, Aina V, Areán CO, Balas F, Cauda V, Colilla M, Delgado MR, Vallet-Regí M (2008) Studies on MCM-41 mesoporous silica for drug delivery: effect of particle morphology and amine functionalization. Chem Eng J 137(1):30–37. https://doi.org/10.1016/j.cej.2007.07.078Merkus HG (2009) Particle size measurements: fundamentals, practice, quality. Springer Science +Businees Media B.V, The NetherlandsMorishige K, Fujii H, Uga M, Kinukawa D (1997) Capillary critical point of argon, nitrogen, oxygen, ethylene, and carbon dioxide in MCM-41. Langmuir 13(13):3494–3498. https://doi.org/10.1021/la970079ude Padua Oliveira DC, de Barros ALB, Belardi RM et al (2016) Mesoporous silica nanoparticles as a potential vaccine adjuvant against Schistosoma mansoni. J Drug Deliv Sci Technol 35:234–240. https://doi.org/10.1016/j.jddst.2016.07.002Phillips E, Penate-Medina O, Zanzonico PB, Carvajal RD, Mohan P, Ye Y, Humm J, Gonen M, Kalaigian H, Schoder H, Strauss HW, Larson SM, Wiesner U, Bradbury MS (2014) Clinical translation of an ultrasmall inorganic optical-PET imaging nanoparticle probe. Sci Transl Med 6(260):260ra149. https://doi.org/10.1126/scitranslmed.3009524Qu F, Zhu G, Lin H, Zhang W, Sun J, Li S, Qiu S (2006) A controlled release of ibuprofen by systematically tailoring the morphology of mesoporous silica materials. J Solid State Chem 179(7):2027–2035. https://doi.org/10.1016/j.jssc.2006.04.002Rafi AA, Mahkam M, Davaran S, Hamishehkar H (2016) A smart pH-responsive nano-carrier as a drug delivery system: a hybrid system comprised of mesoporous nanosilica MCM-41 (as a nano-container) & a pH-sensitive polymer (as smart reversible gatekeepers): preparation, characterization and in vitro releas. Eur J Pharm Sci 93:64–73. https://doi.org/10.1016/j.ejps.2016.08.005Rouquerol J, Rouquerol F, Llewellyn P, et al (2014) Adsorption by powders and porous solids: principles, methodology and applications. Elsevier Ltd.Selvam P, Bhatia SK, Sonwane CG (2001) Recent advances in processing and characterization of periodic mesoporous MCM-41 silicate molecular sieves. Ind Eng Chem Res 40(15):3237–3261. https://doi.org/10.1021/ie0010666Shi YT, Cheng HY, Geng Y, Nan HM, Chen W, Cai Q, Chen BH, Sun XD, Yao YW, Li HD (2010) The size-controllable synthesis of nanometer-sized mesoporous silica in extremely dilute surfactant solution. Mater Chem Phys 120(1):193–198. https://doi.org/10.1016/j.matchemphys.2009.10.045Shibata H, Chiba Y, Kineri T, Matsumoto M, Nishio K (2010) The effect of heat treatment on the interplanar spacing of the mesostructure during the synthesis of mesoporous MCM-41 silica. Colloids Surfaces A Physicochem Eng Asp 358(1-3):1–5. https://doi.org/10.1016/j.colsurfa.2009.12.020Slowing II, Vivero-Escoto JL, Wu C-W, Lin VSY (2008) Mesoporous silica nanoparticles as controlled release drug delivery and gene transfection carriers. Adv Drug Deliv Rev 60(11):1278–1288. https://doi.org/10.1016/j.addr.2008.03.012Sun R, Wang W, Wen Y, Zhang X (2015) Recent advance on mesoporous silica nanoparticles-based controlled release system: intelligent switches open up. Nano 5(4):2019–2053. https://doi.org/10.3390/nano5042019U.S. Department of Health & Human Services (2015) Cancer Nanotechnology PlanUkmar T, Maver U, Planinšek O, Kaučič V, Gaberšček M, Godec A (2011) Understanding controlled drug release from mesoporous silicates: theory and experiment. J Control Release 155(3):409–417. https://doi.org/10.1016/j.jconrel.2011.06.038Vallet-Regi M, Arcos Navarrete D (2016) Nanoceramics in clinical use, 1st edn. The Royal Society of Chemistry, CambridgeVallet-Regi M, Rámila A, Del Real RP, Pérez-Pariente J (2001) A new property of MCM-41: drug delivery system. Chem Mater 13(2):308–311. https://doi.org/10.1021/cm0011559Varga N, Benko M, Sebok D et al (2015) Mesoporous silica core-shell composite functionalized with polyelectrolytes for drug delivery. Microporous Mesoporous Mater 213:134–141. https://doi.org/10.1016/j.micromeso.2015.02.008Wang Y, Zhao Q, Han N, Bai L, Li J, Liu J, Che E, Hu L, Zhang Q, Jiang T, Wang S (2015) Mesoporous silica nanoparticles in drug delivery and biomedical applications. Nanomed Nanotechnol Biol Med 11(2):313–327. https://doi.org/10.1016/j.nano.2014.09.014Wanyika H, Gatebe E, Kioni P et al (2011) Synthesis and characterization of ordered mesoporous silica nanoparticles with tunable physical properties by varying molar composition of reagents. African J Pharm Pharmacol 5(21):2402–2410. https://doi.org/10.5897/AJPP11.592Wu SH, Mou CY, Lin HP (2013) Synthesis of mesoporous silica nanoparticles. Chem Soc Rev 42(9):3862–3875. https://doi.org/10.1039/c3cs35405aXu X, Lü S, Gao C, Wang X, Bai X, Gao N, Liu M (2015a) Facile preparation of pH-sensitive and self-fluorescent mesoporous silica nanoparticles modified with PAMAM dendrimers for label-free imaging and drug delivery. Chem Eng J 266:171–178. https://doi.org/10.1016/j.cej.2014.12.075Xu X, Lü S, Gao C, Wang X, Bai X, Duan H, Gao N, Feng C, Liu M (2015b) Polymeric micelle-coated mesop orous silica nanoparticle for enhanced fluorescent imaging and pH-responsive drug delivery. Chem Eng J 279:851–860. https://doi.org/10.1016/j.cej.2015.05.085Xu X, Lü S, Gao C, Feng C, Wu C, Bai X, Gao N, Wang Z, Liu M (2016) Self-fluorescent and stimuli-responsive mesoporous silica nanoparticles using a double-role curcumin gatekeeper for drug delivery. Chem Eng J 300:185–192. https://doi.org/10.1016/j.cej.2016.04.087Yang Y, Yu C (2015) Advances in silica based nanoparticles for targeted cancer therapy. Nanomedicine nanotechnology. Biol Med 12(2):317–332. https://doi.org/10.1016/j.nano.2015.10.018Zhang H, Tong C, Sha J, Liu B, Lü C (2015) Fluorescent mesoporous silica nanoparticles functionalized graphene oxide: a facile FRET-based ratiometric probe for Hg2+. Sensors Actuators B Chem 206:181–189. https://doi.org/10.1016/j.snb.2014.09.051Zhou C, Yan C, Zhao J, Wang H, Zhou Q, Luo W (2016) Rapid synthesis of morphology-controlled mesoporous silica nanoparticles from silica fume. J Taiwan Inst Chem Eng 62:307–312. https://doi.org/10.1016/j.jtice.2016.01.03
- …