454 research outputs found
Fibre gratings in silica optical fibre
Photorefractive fibre gratings are devices that are rapidly being taken up by the telecommunications and fibre sensor industries due to their wide range of uses. They can be thought of as one-dimensional holograms written directly into the core of a conventional optical fibre which have the capability of reflecting light of a specific wavelength back along the fibre. Like holograms, they are essentially permanent and are written using specialised lasers. They rely on the fact that the refractive index of the germania-doped silica fibre core can be changed by exposure to intense ultraviolet (UV) light, however the exact nature of the photorefractive change is not yet fully understood. In general, it is possible to produce an absolute refractive index change of 10-6 - 10-3 in most fibres, though it is necessary to use specially designed fibres in order to achieve the highest index change
The Shape of the Trade-Off Function Between Reproduction and Future Performance in \u3cem\u3ePlantago major\u3c/em\u3e and \u3cem\u3ePlantago rugelii\u3c/em\u3e
There is a paucity of data describing the nature of the trade-off function between reproduction and future performance. Most studies implicitly assume it is a linear function such that allocation of resources to reproduction results in a proportional decline in future survival and reproduction. We reanalyse data from a field experiment with halfsib families of Plantago major L. that suggests this relationship is in fact curvilinear. Low levels of reproductive investment had relatively little impact on future performance and higher levels of investment had a larger impact. To explain this curvilinear pattern, we conducted an experiment to examine the effect of incremental increases in reproductive investment on rates of resource uptake in P. major and Plantago rugelii Decne. Results suggest that, because of differences in the resource requirements of vegetative versus reproductive tissues, reproduction will have little effect on growth, providing that the limiting resources are required in greater quantities for vegetative as compared with reproductive tissues. These results are in accord with a curvilinear trade-off function between reproduction and future performance and provide an explanation for the maintenance of sexual reproduction in species where seed production may contribute minimally to fitness in the short term
Efficient single frequency fibre lasers using novel photosensitive Er/Yb optical fibres
Boron- and germanium-doped highly photosensitive cladding is used in a novel design to achieve photosensitive Er/Yb-doped fibers, permitting short, strong gratings (length ~1cm, reflectivity >99%) to be written without hydrogenation. The high absorption at 980nm in Er/Yb fibers permits efficient pump absorption over a short device length, which is ideal for achieving highly efficient single-frequency fiber lasers. Both single-frequency Bragg-grating reflector and distributed-feedback lasers with slope efficiencies of 25% with respect to launched pump power have been realized in such fibers
High reflectivity Bragg gratings fabricated by 248nm excimer laser holographic ablation in thin Ta<sub>2</sub>O<sub>5</sub> films overlaid on glass waveguides
Relief Bragg grating reflectors inscribed on channel waveguides may be used in optical communications as add-drop wavelength multiplexers, gain-flattening filters, distributed feedback laser mirrors, or in sensing technology as high sensitivity devices for precise monitoring of chemical or biomedical processes. We present strong Bragg grating reflectors in Ta2O5Â thin oxide films overlaid on potassium ion exchanged channel waveguides in BK-7 glass, inscribed using 248nm excimer laser
holographic ablation. The grating pattern was created employing two-beam
interference using a modified Mach-Zehnder interferometric cavity and the output of a
narrow-lined injection cavity 248nm excimer laser. The experimental data presented
are divided into two sections: the first section refers to the study of the grating
ablation process of thin Ta2O5Â films with respect to the exposure conditions; and the second focuses in the implementation of those relief grating in functional waveguide devices
Optimisation of DSF and SOA based phase conjugators by incorporating noise-suppressing fibre gratings
We compare the performance of dispersion-shifted-fibre (DSF) and semiconductor-optical-amplifier (SOA) based phase conjugators for a 10 Gb/s non-return-to-zero system with respect to conversion efficiency, noise figure and distortion. Fibre gratings are used for signal extraction and amplified spontaneous emission (ASE) suppression, allowing closer wavelength spacing and reducing the conjugation noise figure by up to 12 dB. Despite the higher SOA conversion efficiency, both conjugators give similar noise figures with ASE suppression. However, the DSF based conjugator has the advantage of distortion tolerance at higher input power. Introduction: Optical phase conjugation has attracted much recent research attention due to its potential application for group-velocity-dispersion and self-phase-modulation compensation in mid-point spectral inversion (MPSI) systems, and also for coherent wavelength conversion in optical switching and routing. The two most promising optical phase conjugation techniques are four-wave mixing (FWM) in either dispersion-shifted fibre (DSF), or semiconductor optical amplifiers (SOA). A DSF based conjugator requires phase matching close to its zero dispersion wavelength for efficient four-wave mixing. This restricts its wavelength flexibility compared to an SOA based conjugator which offers a much wider conversion bandwidth. Furthermore, the low FWM conversion efficiency in passive DSF seems to make the SOA a preferred phase conjugating medium. However, in a practical communication system, conjugation optical signal-to-noise ratio (SNR) is more important than conversion efficiency. The noise at the conjugate wavelength is usually dominated by the amplified spontaneous emission (ASE) noise from the pump and signal. The reduction of this noise has been demonstrated in an SOA based conjugator (i) by bandpass filtering of the pump and/or signal waves before mixing, and (ii) by the insertion of a notch filter at the conjugate wavelength before the conjugator. In this letter, SOA and DSF based conjugators are compared by investigating the conversion efficiency, noise and eye opening in a 10 Gb/s non-return-to-zero (NRZ) externally-modulated system, using an identical filtering network. We report for the first time the use of fibre gratings for efficient ASE noise filtering and conjugate signal extraction. The performance enhancement using these noise-suppressing gratings is also investigated
Impact of Flower Harvesting on the Salt Marsh Plant \u3cem\u3eLimonium carolinianum\u3c/em\u3e
Because of the potentially detrimental effects of seed production on adult survivorship and growth, moderate flower harvesting may have little negative impact on population growth of long-lived perennial plants such as Limonium carolinianum (Walter) Britton. We examined this by collecting data on survivorship, growth, and fecundity of an unharvested population over a period of 5 years and conducted a controlled experiment to examine the effect of harvesting on adult survivorship and growth over a 3-year period. Data were summarized in the form of a stage structured matrix population model with a stochastic element that incorporated year-to-year variation in transition probabilities. Contrary to our original hypothesis, we found that preventing seed set through removal of flowers did not increase adult survivorship or growth. By determining the harvest level that reduced population growth rate to 1.0, we estimated the maximum sustainable harvest level to be 16%, a value that is approximately half that of reported harvest levels on accessible marshes in the study area. In spite of this, the reported harvest levels are unlikely to drive local populations to extinction in the foreseeable future. Providing the adult population size is \u3e100 and harvest levels are \u3c90%, time to local extinction will exceed 100 years. This is a function of the very high survivorship of adults in this species and the fact that harvesting has no negative impact on adult survivorship or growth. However, because of the long preadult phase in this species (8–9 years) and the fact that fecundity of young adults is low, recovery from overharvesting is extremely slow. Adult population size can be reduced to 25% of its original value in 7 years at high harvest levels, but it will take 34 years on average to recover once harvesting is terminated
Waveguide lasers operating at 1084nm in neodymium-diffused lithium niobate
We report the demonstration of waveguide lasers in lithium niobate into which the active element neodymium has been introduced by thermal diffusion. The waveguides were fabricated using conventional Ti indiffusion, and optical feedback was provided by the polished endfaces alone. The absorbed power threshold of one waveguide laser was estimated at 13±3 mW for pumping at 814 nm, and its slope efficiency in terms of total lasing output as a function of absorbed pump power was estimated to be 55±8%. Laser output powers in excess of 100 mW were observed
High reflectivity photorefractive Bragg gratings in germania-free optical fibres
We present the first report of Bragg gratings with reflectivities exceeding 99% written in germania-fibre optical fibres by UV exposure. This result has important implications for the production of ultrashort single-frequency fibre lasers
Enhanced photosensitivity in germanosilicate fibres exposed to CO<sub>2</sub> laser radiation
We report a novel method to increase the UV photosensitivity of GeO2:SiO2 optical fibers based on exposure to CO2 laser irradiation before grating writing. Fibers treated with a CO2 laser can produce gratings with refractive-index modulation two times greater and a Bragg wavelength that can be 2 nm longer than those of untreated fibers. Experiments on GeO2:SiO2 preform samples treated with a CO2 laser in a way similar to the fibers showed a marked increase of the 242 nm absorption band, which is associated with an increase of germanium oxygen-deficient centers and is believed to be responsible for the higher photorefractive response
Grating formulation in a phosphorus-doped germanosilicate fibre
Refractive index changes as high as ~5 x 10-4 in a phosphorus-doped germanosilicate fibre were observed for the first time without hydrogen loading during grating formation with a 193 nm laser. Dynamics was studied and it was found that Type IIa gratings was easily formed in this fibre
- …