Designing of a new seismic base isolation system

The design of a new base isolation system is proposed in this research with the objective that the system does not transmit any force to the structure under horizontal loading. The structure must remain operational and steady. Before investigating the dynamics problem of the base isolation system, the isolator components of the model can be solved analytically using different approaches. In order to calculate the deformation of any element of the isolator due to a compressive vertical load, the analysis focuses on the primary instability region to determine all deformations parameters which can lead to frictions coefficients. This region is located at the interaction contact point between the elements. The design is based on the contact point developed by different approaches. In the present study, the mathematical analysis methods by using formulations can calculate the different dimensions and deformations of the elements of the system and which are verified using ANSYS finite element analysis.  After ensuring the adequate dimensions of the different parts of the isolator system from the analysis, the system can be applied on the structure. This technique can reduce significantly the displacements and accelerations at the underground level with a new seismic isolation system, which it is an uncoupled system between the structure and the underground

Designing of a new seismic base isolation system

The design of a new base isolation system is proposed in this research with the objective that the system does not transmit any force to the structure under horizontal loading. The structure must remain operational and steady. Before investigating the dynamics problem of the base isolation system, the isolator components of the model can be solved analytically using different approaches. In order to calculate the deformation of any element of the isolator due to a compressive vertical load, the analysis focuses on the primary instability region to determine all deformations parameters which can lead to frictions coefficients. This region is located at the interaction contact point between the elements. The design is based on the contact point developed by different approaches. In the present study, the mathematical analysis methods by using formulations can calculate the different dimensions and deformations of the elements of the system and which are verified using ANSYS finite element analysis.  After ensuring the adequate dimensions of the different parts of the isolator system from the analysis, the system can be applied on the structure. This technique can reduce significantly the displacements and accelerations at the underground level with a new seismic isolation system, which it is an uncoupled system between the structure and the underground

Outdoor thermal comfort optimization through vegetation parameterization : species and tree layout

The optimization of outdoor thermal comfort has become the keystone to guarantee the healthy and comfortable use of outdoor spaces. This study aims to optimize the outdoor thermal comfort through vegetation parameterization in a boulevard located in Guelma city, Algeria during summertime. However, two main parameters were investigated, species and tree layout, through a numerical simulation. We first collected microclimate data of a sunny summer day. Second, we used real microclimate data in different simulations using the Envi-met atmospheric model. The findings reveal that Ficus Nitida is the most significant species to intercept solar radiation and provide shade over the day in Souidani Boudjemaa Boulevard, with a maximum reduction of Ta = 0.3 °C and UTCI = 2.6 °C at 13:00 p.m. Tree layout is a determining parameter in the creation of shaded paths, based on the quality of the shadows cast by the trees, namely, their size. Thereby, planting the washingtonia palm trees along the center of the boulevard is the best option to maximize the shaded area within the boulevard, with maximum reduction of Ta = 1.8 °C and UTCI = 3.5 °C at 16:00 p.m.https://www.mdpi.com/journal/sustainabilityMechanical and Aeronautical Engineerin

MODELLING AND SIMULATION OF A SUBSTRATE THERMOMECHANICAL BEHAVIOR DURING THE PLASMA SPRAYING

In our study, a 3D thermal plasma jet was simulated using the ANSYS-CFX code with two turbulence models and for different cases of effective powers. The analysis of the turbulent flow during the thermal jet using the RNG k-ε and SST k-ω models was also presented. The velocity and temperature profiles at the nozzle outlet were deduced from the literature and used as inlet boundary conditions. The results obtained from the two turbulence models show that the RNG k-ε model with different effective powers (790 W; 1050 W; 1350 W and 1780 W) is in good agreement with the experimental results. The RNG k-ε model gave results closer to the experiment than the results obtained from the SST k-ω model. It can also be concluded that when increasing the power supplied to the gas used, the temperature increases and it is maximum in the central axis. In the second step, the flow analyzed by the RNG k-ε model generated the initial conditions for the unsteady flow. Transient simulations for the 2D plasma jet are performed to obtain the velocity and temperature fields and also to obtain the temperature distribution in the substrate for the different time values. The transient simulations in the substrate for the different time values have also been studied. The results showed that the variation of the temperature of the plasma jet is always insignificant near the substrate for any value of time (flat curves) this says that the maximum of the temperatures obtained at the level of the substrate in the axial direction (Z axis) are maximum at the interface between the flow and the substrate (i.e. the contact surface at the centerline), and the maximum of the temperatures obtained at the substrate in the radial direction (y-axis) are maximum at the center of the substrate (i.e. x=0 and y= 0)

Bistability and hysteresis induced by form drag in nonlinear subcritical and supercritical double-diffusive Lapwood convection in shallow porous enclosures

This paper considers natural Lapwood convection in a shallow porous cavity filled with a binary fluid. The investigation is mainly focused on the nonlinear behaviour of subcritical convection and the bistability phenomenon caused by the combined effects of porous medium form drag and double-diffusive convection. The Dupuit\u2013Darcy model, which includes the effect of the form drag at high Reynolds flow, is used to describe the convective flow in the porous matrix. The enclosure is subject to vertical temperature and concentration gradients. ...Peer reviewed: YesNRC publication: Ye

Non-Darcian effect on double-diffusive natural convection inside aninclined square Dupuit-Darcy porous cavity under a magnetic field

International audienceThis paper presents a numerical study of a double diffusive convection in an inclined square porous cavity filled with an electrically conducting binary mixture. The upper and bottom walls are maintained at a constant temperatures and concentrations whereas the left and right walls are assumed to be adiabatic and impermeable. A uniform and tilted magnetic field is applied at an angle, ?, about the horizontal, it is obvious that this is related to the orientation of the magnetic force that can help or oppose the buoyant force. The Dupuit-Darcy flow model, which includes effects of the inertial parameter, with the Boussinesq approximation, energy, and species transport equations are solved numerically using the classical finite difference method. Governing parameters of the problem under study are the thermal Rayleigh number, Hartmann number, Lewis number, the buoyancy ratio, inclination angle, and tilting angle of the magnetic field. The numerical results are reported on the contours of streamline, temperature, and concentration and for the average Nusselt and Sherwood numbers for various parametric conditions. It is demonstrated that both the inertial effect parameter and the magnetic field, have a strong influence on the strength of the natural convection heat and mass transfer within the porous layer

Numerical study of heat transfer enhancement in parallel-plate channels with rotating baffles

The present work aims to improve the heat transfer rate in a rectangular channel. To improve the dynamic and thermal characteristics, a deflector is inserted on the axis of the thermal channel. The inclination angles of the deflector are taken into account, α = 90°, 70°, 50° and 30°.H2 gas, which has high thermal conductivity, used to significantly improve the overall thermal performance of various types of thermal equipment. The average Nusselt number is improved by the angle of inclination of the deflector (α = 90°). The Nusselt number (Nu) also increases the temperature difference between the wall surface and the H2 gas, resulting in good cooling for different Reynolds numbers, Re = 5000, 10000, 15000, 20000 and 25000