2,288 research outputs found
High pressure Hugoniot measurements using Mach waves
Traditionally, most dynamic shock compression experiments are conducted using a plane one-dimensional wave of uniaxial strain. In this case, the evaluation of the equation of state is simplified due to the geometry, but the amplitude of the induced shock wave is limited by the magnitude of the input load. In an effort to dramatically increase the range of pressures that can be accessed by traditional loading methods, a composite target assembly is examined. The target consists of two concentric cylinders aligned with the axial direction parallel to the loading. The target is designed such that on initial loading, the outer cylinder will have a higher shock velocity than the inner material of interest. Conically converging shocks will be generated at the interface between the two materials due to the impedance mismatch. Upon convergence, an irregular reflection occurs and the conical analog of a Mach reflection develops. The Mach reflection will grow until it reaches a steady state, at which point the wave configuration becomes self similar. The resulting high pressure Hugoniot state can then be measured using velocity interferometry and impedance matching. The technique is demonstrated using a planar mechanical impact generated by a powder gun to study the shock response of copper. Two systems are examined which utilize either a low impedance (6061-T6 aluminum) or a high impedance (molybdenum) outer cylinder. A multipoint VISAR experiment will be presented to validate the technique, and will be compared to numerical simulations. The feasibility of measuring an entire Hugoniot curve using full field velocity interferometry (ORVIS) will also be discussed
Observations of transient high temperature vortical microstructures in solids during adiabatic shear banding
By using a unique infrared high-speed camera especially constructed for recording highly transient temperature fields at the microscale, we are able to reveal the spatial and temporal microstructure within dynamically growing shear bands in metals. It is found that this structure is highly nonuniform and possesses a transient, short range periodicity in the direction of shear band growth in the form of an array of intense "hot spots" reminiscent of the well-known, shear-induced hydrodynamic instabilities in fluids. This is contrary to the prevailing classical view that describes the deformations and the temperatures within shear bands as being essentially one-dimensional fields. These observations are also reminiscent of the nonuniform structure of localized shear regions believed to exist, at an entirely different length scale, in the earth's lower crust and upper mantle
Three-Dimensional Analysis of the Effect of Epidermal Growth Factor on Cell-Cell Adhesion in Epithelial Cell Clusters
The effect that growth factors such as epidermal growth factor (EGF) have on cell-cell adhesion is of interest in the study of cellular processes such as epithelial-mesenchymal transition. Because cell-cell adhesions cannot be measured directly, we use three-dimensional traction force microscopy to measure the tractions applied by clusters of MCF-10A cells to a compliant substrate beneath them before and after stimulating the cells with EGF. To better interpret the results, a finite element model, which simulates a cluster of individual cells adhered to one another and to the substrate with linear springs, is developed to better understand the mechanical interaction between the cells in the experiments. The experiments and simulations show that the cluster of cells acts collectively as a single unit, indicating that cell-cell adhesion remains strong before and after stimulation with EGF. In addition, the experiments and model emphasize the importance of three-dimensional measurements and analysis in these experiments
Influence of Interface Scattering on Shock Waves in Heterogeneous Solids
In heterogeneous media, the scattering due to interfaces between dissimilar materials play an important role in shock wave dissipation and dispersion. In this work the influence of interface scattering effect on shock waves was studied by impacting flyer plates onto periodically layered polycarbonate/6061 aluminum, polycarbonate/304 stainless steel and polycarbonate/glass composites. The experimental results (using VISAR and stress gauges) indicate that the rise time of the shock front decreases with increasing shock strength, and increases with increasing mechanical impedance mismatch between layers; the strain rate at the shock front increases by about the square of the shock stress. Experimental and numerical results also show that due to interface scattering effect the shock wave velocity in periodically layered composites decreases. In some cases the shock velocity of a layered heterogeneous composite can be lower than that of either of its components
Fresnel transmission coefficients for thermal phonons at solid interfaces
Interfaces play an essential role in phonon-mediated heat conduction in
solids, impacting applications ranging from thermoelectric waste heat recovery
to heat dissipation in electronics. From a microscopic perspective, interfacial
phonon transport is described by transmission and reflection coefficients,
analogous to the well-known Fresnel coefficients for light. However, these
coefficients have never been directly measured, and thermal transport processes
at interfaces remain poorly understood despite considerable effort. Here, we
report the first measurements of the Fresnel transmission coefficients for
thermal phonons at a metal-semiconductor interface using ab-initio phonon
transport modeling and a thermal characterization technique, time-domain
thermoreflectance. Our measurements show that interfaces act as thermal phonon
filters that transmit primarily low frequency phonons, leading to these phonons
being the dominant energy carriers across the interface despite the larger
density of states of high frequency phonons. Our work realizes the
long-standing goal of directly measuring thermal phonon transmission
coefficients and demonstrates a general route to study microscopic processes
governing interfacial heat conduction
Million frames per second infrared imaging system
An infrared imaging system has been developed for measuring the temperature increase during the dynamic deformation of materials. The system consists of an 8×8 HgCdTe focal plane array, each with its own preamplifier. Outputs from the 64 detector/preamplifiers are digitized using a row-parallel scheme. In this approach, all 64 signals are simultaneously acquired and held using a bank of track and hold amplifiers. An array of eight 8:1 multiplexers then routes the signals to eight 10 MHz digitizers, acquiring data from each row of detectors in parallel. The maximum rate is one million frames per second. A fully reflective lens system was developed, consisting of two Schwarszchild objectives operating at infinite conjugation ratio. The ratio of the focal lengths of the objectives determines the lens magnification. The system has been used to image the distribution of temperature rise near the tip of a notch in a high strength steel sample (C-300) subjected to impact loading by a drop weight testing machine. The results show temperature rises at the crack tip up to around 70 K. Localization of temperature, and hence, of deformation into "U" shaped zones emanating from the notch tip is clearly seen, as is the onset of crack propagation
Fracture through cavitation in a metallic glass
The fracture surfaces of a Zr-based bulk metallic glass exhibit exotic multi-affine isotropic scaling properties. The study of the mismatch between the two facing fracture surfaces as a function of their distance shows that fracture occurs mostly through the growth and coalescence of damage cavities. The fractal nature of these damage cavities is shown to control the roughness of the fracture surfaces
- …