599 research outputs found

    Human NDE1 splicing and mammalian brain development.

    Get PDF
    Exploring genetic and molecular differences between humans and other close species may be the key to explain the uniqueness of our brain and the selective pressures under which it evolves. Recent discoveries unveiled the involvement of Nuclear distribution factor E-homolog 1 (NDE1) in human cerebral cortical neurogenesis and suggested a role in brain evolution; however the evolutionary changes involved have not been investigated. NDE1 has a different gene structure in human and mouse resulting in the production of diverse splicing isoforms. In particular, mouse uses the terminal exon 8 T, while Human uses terminal exon 9, which is absent in rodents. Through chimeric minigenes splicing assay we investigated the unique elements regulating NDE1 terminal exon choice. We found that selection of the terminal exon is regulated in a cell dependent manner and relies on gain/loss of splicing regulatory sequences across the exons. Our results show how evolutionary changes in cis as well as trans acting signals have played a fundamental role in determining NDE1 species specific splicing isoforms supporting the notion that alternative splicing plays a central role in human genome evolution, and possibly human cognitive predominance

    Computational Modeling of Magnesium Hydroxide Precipitation and Kinetics Parameters Identification

    Get PDF
    Magnesium is a critical raw material and its recovery as Mg(OH)2 from saltwork brines can be realized via precipitation. The effective design, optimization, and scale-up of such a process require the development of a computational model accounting for the effect of fluid dynamics, homogeneous and heterogeneous nucleation, molecular growth, and aggregation. The unknown kinetics parameters are inferred and validated in this work by using experimental data produced with a T2mm-mixer and a T3mm-mixer, guaranteeing fast and efficient mixing. The flow field in the T-mixers is fully characterized by using the k-ϵ turbulence model implemented in the computational fluid dynamics (CFD) code OpenFOAM. The model is based on a simplified plug flow reactor model, instructed by detailed CFD simulations. It incorporates Bromley’s activity coefficient correction and a micro-mixing model for the calculation of the supersaturation ratio. The population balance equation is solved by exploiting the quadrature method of moments, and mass balances are used for updating the reactive ions concentrations, accounting for the precipitated solid. To avoid unphysical results, global constrained optimization is used for kinetics parameters identification, exploiting experimentally measured particle size distribution (PSD). The inferred kinetics set is validated by comparing PSDs at different operative conditions both in the T2mm-mixer and the T3mm-mixer. The developed computational model, including the kinetics parameters estimated for the first time in this work, will be used for the design of a prototype for the industrial precipitation of Mg(OH)2 from saltwork brines in an industrial environment

    The Role of Operating Conditions in the Precipitation of Magnesium Hydroxide Hexagonal Platelets Using NaOH Solutions

    Get PDF
    Magnesium hydroxide, Mg(OH)2, is an inorganic compound extensively employed in several industrial sectors. Nowadays, it is mostly produced from magnesium-rich minerals. Nevertheless, magnesium-rich solutions, such as natural and industrial brines, could prove to be a great treasure. In this work, synthetic magnesium chloride and sodium hydroxide (NaOH) solutions were used to recover Mg(OH)2 by reactive crystallization. A detailed experimental campaign was conducted aiming at producing grown Mg(OH)2 hexagonal platelets. Experiments were carried out in a stirred tank crystallizer operated in single- and double-feed configurations. In the single-feed configuration, globular and nanoflakes primary particles were obtained, as always reported in the literature when NaOH is used as a precipitant. However, these products are not complying with flame-retardant applications that require large hexagonal Mg(OH)2 platelets. This work suggests an effective precipitation strategy to favor crystal growth while, at the same time, limiting the nucleation mechanism. The double-feed configuration allowed the synthesis of grown Mg(OH)2 hexagonal platelets. The influence of reactant flow rates, reactant concentrations, and reaction temperature was analyzed. Scanning electron microscopy (SEM) pictures were also taken to investigate the morphology of Mg(OH)2 crystals. The proposed precipitation strategy paves the road to satisfy flame-retardant market requirements

    Child healthcare services offered by the Vatican City State in its national territory and in extra-territorial neighboring Italian areas

    Get PDF
    Pediatric healthcare activity related to the Vatican City State is carried out at secondary and tertiary levels in the two main pediatric territorial and extra-territorial medical centers, which are administered by the Vatican: the Bambino Gesu Pediatric Hospital and the Mother and Child pediatric Department of the Casa Sollievo della Sofferenza Medical Center. Both centers are recognized by the Italian State and internationally with the formal legal status of Scientific Institutes for Clinical Research. The relations established between the Holy See, in the person of the Secretary of State, the Board of Directors, the President of the Board, and the Board of Auditors regulate the management of the two medical centers. The child healthcare and research activity of the two Vatican State administered medical centers is described in this article

    Spectrophotometric properties of dwarf planet Ceres from the VIR spectrometer on board the Dawn mission

    Get PDF
    We study the spectrophotometric properties of dwarf planet Ceres in the VIS-IR spectral range by means of hyper-spectral images acquired by the VIR imaging spectrometer on board the NASA Dawn mission. Disk-resolved observations with a phase angle within the 7∘<α<132∘7^{\circ}<\alpha<132^{\circ} interval were used to characterize Ceres' phase curve in the 0.465-4.05 μ\mum spectral range. Hapke's model was applied to perform the photometric correction of the dataset, allowing us to produce albedo and color maps of the surface. The VV-band magnitude phase function of Ceres was fitted with both the classical linear model and H-G formalism. The single-scattering albedo and the asymmetry parameter at 0.55μ\mum are w=0.14±0.02w=0.14\pm0.02 and ξ=−0.11±0.08\xi=-0.11\pm0.08, respectively (two-lobe Henyey-Greenstein phase function); the modeled geometric albedo is 0.094±0.0070.094\pm0.007; the roughness parameter is θˉ=29∘±6∘\bar{\theta}=29^{\circ}\pm6^{\circ}. Albedo maps indicate small variability on a global scale with an average reflectance of 0.034±0.0030.034 \pm 0.003. Isolated areas such as the Occator bright spots, Haulani, and Oxo show an albedo much higher than average. We measure a significant spectral phase reddening, and the average spectral slope of Ceres' surface after photometric correction is 1.1%kA˚−11.1\%k\AA^{-1} and 0.85%kA˚−10.85\%k\AA^{-1} at VIS and IR wavelengths, respectively. Broadband color indices are V−R=0.38±0.01V-R=0.38\pm0.01 and R−I=0.33±0.02R-I=0.33\pm0.02. H-G modeling of the VV-band magnitude phase curve for α<30∘\alpha<30^{\circ} gives H=3.14±0.04H=3.14\pm0.04 and G=0.10±0.04G=0.10\pm0.04, while the classical linear model provides V(1,1,0∘)=3.48±0.03V(1,1,0^{\circ})=3.48\pm0.03 and β=0.036±0.002\beta=0.036\pm0.002. The comparison with spectrophotometric properties of other minor bodies indicates that Ceres has a less back-scattering phase function and a slightly higher albedo than comets and C-type objects. However, the latter represents the closest match in the usual asteroid taxonomy.Comment: 14 pages, 20 figures, published online on Astronomy and Astrophysics on 13 February 2017. Revised to reflect minor changes in text and figures made in proofs, updated value of V-R and R-

    Analysis of particles size distributions in Mg(OH)2 precipitation from highly concentrated MgCl2 solutions

    Get PDF
    Magnesium is a raw material of great importance, which attracted increasing interest in the last years. A promising route is to recover magnesium in the form of Magnesium Hydroxide via precipitation from highly concentrated Mg2+ resources, e.g. industrial or natural brines and bitterns. Several production methods and characterization procedures have been presented in the literature reporting a broad variety of Mg(OH)2 particle sizes. In the present work, a detailed experimental investigation is aiming to shed light on the characteristics of produced Mg(OH)2 particles and their dependence upon the reacting conditions. To this purpose, two T-shaped mixers were employed to tune and control the degree of homogenization of reactants. Particles were analysed by laser static light scattering with and without an anti-agglomerant treatment based on ultrasounds and addition of a dispersant. Zeta potential measurements were also carried out to further assess Mg(OH)2 suspension stability

    Mixing phenomena in circular and rectangular cross-sectional T-mixers: Experimental and numerical assessment

    Get PDF
    In the present work, the mixing performance of square and circular cross-sectional millimetre-sized T-mixers was experimentally and numerically investigated. The pure dilution of non-reacting species (blue and yellow food dyes) and the chemical reaction of two-coloured reactants (i.e., strong acid and strong base with a pH indicator) were captured experimentally by adopting a low-cost colorimetric digital image analysis technique. Turbulence was modelled by k − ε model coupled with the β-PDF approach to account for turbulence-chemistry interactions. The circular cross-sectional T-mixer showed better mixing efficiency than the square one. Moreover, an even larger mixing performances were obtained by setting unbalanced fluid flow rates. To exploit the low computational demanding k − ε model, the Cε2 parameter was tuned, showing good reliability in describing the phenomena in the mixers. Mixing time estimations were based on both time averages and instantaneous quantities, and some possible limits of the approaches commonly adopted in the literature were identified
    • …
    corecore