Silicone rubber selection for passive sampling of pesticides in water.

The authors thank G. Raffin and M. Hangouet (ISA, UMR 5280) for TGA analysis and interpretation, and C. Guillemain (Irstea) for analytical support.International audienceSilicone rubber can extract organic compounds with a broad range of polarities (logKow>2-3) from aqueous samples. Such compounds include substances of major concern in the protection of aquatic ecosystems and human health, e.g. pesticides. Silicone rubbers (SRs) with various characteristics have been successfully used in sorptive methods for water sample extraction in the laboratory (SPME, SBSE), and for passive sampling in aquatic environments. However, only few studies have evaluated variability in organic compound sorption due to the origin of SRs, particularly for pesticides. The aim of this study was to select an SR for the extraction of pesticides from water samples by passive sampling. To this end we measured the impact of seven SR formulations on sorption capacity, defined by the partition coefficient (Ksw). Kinetic experiments and sorption isotherms were performed to determine extraction recovery as a selection criterion for SRs, and pesticide partition coefficients. Very large differences in affinity for pesticides were found between two kinds of SRs: "Polymerized SR kits" and "Manufactured SRs". One SR was chosen among the "Manufactured SRs", and the Ksw values of 21 pesticides were determined, filling a gap in the literature (1.50<logKow<5.51). In light of sorption properties, literature data and additional economic and technical factors, we suggest using SR from Goodfellow in future work to reduce the variability of Ksw literature values

Mise au point de méthodes en HPLC : du mode isocratique au gradient d’élution

International audienc

Utilité des contrôleurs pour l'enseignement des sciences analytiques- de l'acquisition à la validation des méthodes

Institut de Chimie CNRS action convergenceNational audienc

-

International audienc

Capillary monolithic titania column for miniaturized liquid chromatography and extraction of organo-phosphorous compounds

International audienceA new sol-gel protocol was designed and optimized to produce titanium-dioxide-based columns within confined geometries such as monolithic capillary columns and porous-layer open-tubular columns. A surface pre-treatment of the capillary enabled an efficient anchorage of the monolith to the silica capillary wall during the synthesis. The monolith was further synthesized from a solution containing titanium n-propoxide, hydrochloric acid, N-methylformamide, water, and poly(ethylene oxide) as pore template. The chromatographic application of capillary titania-based columns was demonstrated with the separation of a set of phosphorylated nucleotides as probe molecules using aqueous normal-phase liquid chromatography conditions. Capillary titania monoliths offered a compromise between the high permeability and the important loading capacity needed to potentially achieve miniaturized sample preparations. The specificity of the miniaturized titania monolithic support is illustrated with the specific enrichment of 5'-adenosine mono-phosphate. The monolithic column offered a ten times higher loading capacity of 5'-adenosine mono-phosphate compared with that of the capillary titania porous-layer open-tubular geometry

Réflexion autour des MOOC (Massive Open Online Course)

International audienc

Gas chromatography-mass spectroscopy optimization by computer simulation, application to the analysis of 93 volatile organic compounds in workplace ambient air.

International audienceGC-MS optimization method including both advantages from chromatographic separation and mass spectrometric detection was designed for a set of 93 volatile organic compounds. Only a few experiments were necessary to determine the thermodynamic retention parameters for all compounds on a RTX-VMS column. From these data, computer simulation was used in order to predict the retention times of the compounds in temperature programmed gas chromatography. Then, an automatic selection of ions from the NIST database was performed and compared to the optimum conditions (full separation of VOC). This simulation-selection procedure was used to screen a numerous set of GC and MS conditions in order to quickly design a GC-MS method whatever the set of compounds considered

On line liquid valve coupled to GCxGC technique

International audienc