Reconstruction of comminuted frontal bone fracture with titanium plates and acrylic resin: Report of two cases

Abstract Fractures of the frontal bone are quite common in the context of head and neck injuries representing 5–15% of facial fractures. In this work we report two cases of comminuted fractures of frontal bone following a car crash submitted to surgical reconstruction of fractures by osteosynthesis and application of an acrylic resin. The patients, after the stabilization of the clinical conditions, were treated by our Maxillofacial Surgery Unit of University Magna Grecia in Catanzaro in collaboration with Neurosurgery Unit in the same University. The use of osteosynthesis associated with the application of an acrylic resin in a single time represents the best surgical approach for the treatment of fractures of the frontal bone allowing to obtain a better definition of anatomical structures and also a good aesthetic result. The advantages of this double approach consist of reduced surgical times, hospitalization stay and costs, and a good aesthetic impact with positive psychological implications on the patient

A Rare Case of Traumatic Ulcerative Granuloma with Stromal Eosinophilia of the Tongue (Tugse) in a Child: Diagnostic Problems and Differential Diagnosis

n/

Myoepithelioma of the parotid gland: A case report with review of the literature

Myoepithelioma is a rare tumor of the salivary glands belonging to a distinct category of neoplasms according to World Health Organization. It represents about 1% of all tumors that develop in the salivary glands. Generally the majority of myoepitheliomas are benign but malignant transformation can take place in untreated or recurrent cases. We present a case of a rare myoepithelioma of the left parotid gland, with review of literature. Keywords: Parotid gland, Salivary glands myoepithelioma, Benign salivary glands tumors, Myoepithelioma, Spindle cells myoepitheliom

Factors Influencing Appliance Wearing Time during Orthodontic Treatments: A Literature Review

This review aims to analyze the multiple factors affecting patients’ level of compliance (how much they wear removable devices/clear aligners) during orthodontic treatments and to investigate the available methods and devices to monitor the appliance wearing time and to improve it. A literature search was conducted on electronic databases (Pubmed, Scopus, and Google Scholar). The results of the present study suggest that compliance indicators may misestimate the intraoral wearing time. Compliance is affected by patient-related factors (age, personality traits, the importance of personal appearance, self-perception of malocclusion), appliance-related factors (visibility, pain/discomfort), and clinician-related factors (trust, clear and complete communication, motivation). The motivation of pre-pubertal patients is mostly external, while adolescents/young adults have intrinsic motivation for orthodontic treatment. Patients’ self-reports tend to overestimate the appliance wearing time. Even if there is a lack of evidence, teledentistry might improve patients’ awareness of being monitored, thus increasing the time for which orthodontic devices are worn. Compliance is a key factor for clear aligner treatments, but high-quality studies focusing on this aspect are missing. Further studies should focus on how to handle the lack of cooperation and how to increase compliance in order to maximize the treatment’s results

Factors Influencing Appliance Wearing Time during Orthodontic Treatments: A Literature Review

This review aims to analyze the multiple factors affecting patients’ level of compliance (how much they wear removable devices/clear aligners) during orthodontic treatments and to investigate the available methods and devices to monitor the appliance wearing time and to improve it. A literature search was conducted on electronic databases (Pubmed, Scopus, and Google Scholar). The results of the present study suggest that compliance indicators may misestimate the intraoral wearing time. Compliance is affected by patient-related factors (age, personality traits, the importance of personal appearance, self-perception of malocclusion), appliance-related factors (visibility, pain/discomfort), and clinician-related factors (trust, clear and complete communication, motivation). The motivation of pre-pubertal patients is mostly external, while adolescents/young adults have intrinsic motivation for orthodontic treatment. Patients’ self-reports tend to overestimate the appliance wearing time. Even if there is a lack of evidence, teledentistry might improve patients’ awareness of being monitored, thus increasing the time for which orthodontic devices are worn. Compliance is a key factor for clear aligner treatments, but high-quality studies focusing on this aspect are missing. Further studies should focus on how to handle the lack of cooperation and how to increase compliance in order to maximize the treatment’s results

Influences of Different Air-Inhibition Coatings on Monomer Release, Microhardness, and Color Stability of Two Composite Materials

The aim of this study was to evaluate the effect of light-curing protocols on two modern resin composites using different air-inhibition coating strategies. This was accomplished by assessing the amount of monomer elution, surface microhardness, and composite discoloration in different storage conditions. A total of 120 specimens were prepared using Filtek Supreme XTE (3M ESPE, Seefeld, Germany) and CeramX Universal (Dentsply DeTrey, Konstanz, Germany). Specimens were light-cured in air as per manufacturer’s instructions or in the absence of oxygen. This latter condition was achieved using three different approaches: (i) transparent polyester strip; (ii) glycerin; (iii) argon gas. Specimens were assessed for release of monomers, Vickers hardness, and discoloration after storage in different solutions. The results were analyzed with ANOVA one-way test followed by Student-Newman-Keuls test. Moreover, multiple comparisons of means were performed using the Student t-test (p<0.05). The amount of monomers released from the tested specimens was very low in all conditions. The presence of oxygen induced some decrease in microhardness. The highest discoloration values, for both materials, were obtained after ageing in red wine. In case finish and polish procedures are awkward to achieve in posteriors composite restoration, light-curing in the absence of oxygen should be considered, especially when performing composite restoration in esthetic areas

Mini-retromandibular transparotid approach to subcondylar fractures of the mandible A single Center clinical experience

We evaluated the safety and efficacy using a mini-retromandibular transparotid approach to reduce and rigidly fix displaced mandibular condylar neck fractures

Cyclic fatigue of Reciproc and Reciproc Blue nickel-titanium reciprocating files at different environmental temperatures

Introduction: The aim of the present study was to investigate the impact of ambient temperature on the life span of nickel-titanium (NiTi) files. Methods: Cyclic fatigue testing of NiTi instruments was performed in a stainless steel artificial canal. During the experiment, 4 different temperatures (0°C, 20°C, 35°C, and 39°C) were used in a thermostatic bath controlled using electronic and infrared controls. Eighty R25 Reciproc Blue (VDW, Munich, Germany) and 80 R25 Reciproc (VDW) instruments were reciprocated in the artificial canal until fracture occurred, and the time to fracture and the length of the fractured fragment were recorded. The phase transformation temperature for 3 instruments of each type was analyzed by differential scanning calorimetry. One-way analysis of variance and Bonferroni tests were used to statistically analyze the data at a 5% significance level (P 20°C > 35°C > 39°C). No significant difference was registered for the length of the fractured fragment of both instruments tested at all temperatures tested (P >.05). Conclusions: Blue alloy significantly increases the cyclic fatigue resistance of Reciproc files compared with M-Wire alloy. Temperature significantly affects the life span of NiTi files. When the ambient temperature increases between 0°C and 35°C, the fatigue resistance of the files statistically decreases

Common Protective Strategies in Neurodegenerative Disease: Focusing on Risk Factors to Target the Cellular Redox System

Neurodegenerative disease is an umbrella term for different conditions which primarily affect the neurons in the human brain. In the last century, significant research has been focused on mechanisms and risk factors relevant to the multifaceted etiopathogenesis of neurodegenerative diseases. Currently, neurodegenerative diseases are incurable, and the treatments available only control the symptoms or delay the progression of the disease. This review is aimed at characterizing the complex network of molecular mechanisms underpinning acute and chronic neurodegeneration, focusing on the disturbance in redox homeostasis, as a common mechanism behind five pivotal risk factors: aging, oxidative stress, inflammation, glycation, and vascular injury. Considering the complex multifactorial nature of neurodegenerative diseases, a preventive strategy able to simultaneously target multiple risk factors and disease mechanisms at an early stage is most likely to be effective to slow/halt the progression of neurodegenerative diseases

Antimicrobial and Antibiofilm Properties of Graphene Oxide on Enterococcus faecalis

The aim of this study was to evaluate the antibacterial properties of graphene oxide (GO) against Enterococcus faecalis in vitro conditions and when used to coat dentin surface to prevent E. faecalis adhesion. The ATCC strain of E. faecalis 29212 has been used to perform a viability test. The pellet was suspended in ultrapure water, NaCl, PBS buffer, CaCl2 and MgCl2, Luria&minus;Bertani broth solutions. The viability was evaluated by the colony forming unit counting method. Atomic force microscopy images and the measure of surface zeta potential variation were analyzed. Dentin discs were covered with a film of GO (n = 15) or were not treated (n = 15). Bacterial suspension was added to each sample of dentine discs and microbial counts were calculated. Statistically significant differences between two groups were assessed by a two-tailed unpaired t-test. Bacteria cell morphology was investigated with scanning electron microscopy. The highest growth inhibition was obtained in ddH2O and CaCl2 solution while, in PBS and NaCl, GO had poor antibacterial efficacy with a growth enhancing effect in the latter. GO on dentin discs demonstrated high antibacterial activity. GO film has demonstrated acceptable adhesion properties to root dentin and a role in the inhibition of bacterial film proliferation and biofilm formation