The effect of macromolecular structure on the rheology and surface properties of amphiphilic random polystyrene-r-poly(meth)acrylate copolymers prepared by RDRP

In this work rheological and surface properties of various random copolymers of styrene and sodium (meth)acrylate, prepared using reversible deactivation radical polymerization (RDRP), were studied. It is shown that the properties of these polymers in water solution, relevant for several applications, are affected by their chemical structure and molecular weight. Cryo-TEM images of their concentrated water solutions do not show the presence of nano-objects as micelles, however the existence of some aggregates seems to be confirmed by fluorescence measurements using pyrene as a hydrophobic probe and by surface tension measurements. Moreover, interesting results are displayed about the viscosity as well as the surface tension of these water polymer solutions, due probably to different interactions at the molecular level as suggested by fluorescence measurements.</p

Synthesis of zwitterionic copolymers via copper-mediated aqueous living radical grafting polymerization on starch

[2-(Methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammonium hydroxide (SBMA) is a well-studied sulfobetaine-methacrylate as its zwitterionic structure allows the synthesis of polymers with attractive properties like antifouling and anti-polyelectrolyte behavior. In the present work, we report the Cu0-mediated living radical polymerization (Cu0-mediated LRP) of SBMA in sodium nitrate aqueous solution instead of previously reported solvents like trifluoroethanol and sodium chloride aqueous/alcoholic solution. Based on this, starch-g-polySBMA (St-g-PSBMA) was also synthesized homogeneously by using a water-soluble waxy potato starch-based macroinitiator and CuBr/hexamethylated tris(2-aminoethyl)amine (Me6TREN) as the catalyst. The structure of the macroinitiator was characterized by 1H-NMR, 13C-NMR, gHSQC, and FT-IR, while samples of PSBMA and St-g-PSBMA were characterized by 1H-NMR and FT-IR. Monomer conversion was monitored by 1H-NMR, on the basis of which the reaction kinetics were determined. Both kinetic study and GPC results indicate reasonable controlled polymerization. Furthermore, a preliminary study of the thermal response behavior was also carried through rheological tests performed on aqueous solutions of the prepared materials. Results show that branched zwitterionic polymers are more thermal-sensitive than linear ones.</p

A Structure-Properties Relationship Study of Self-Healing Materials Based on Styrene and Furfuryl Methacrylate Cross-Linked via Diels-Alder Chemistry

A series of copolymers of styrene and furfuryl methacrylate characterized by various molecular structures (linear and star, block and random) is synthesized via atom transfer radical polymerization, and cross-linked with a bismaleimide by means of thermally reversible Diels-Alder (DA) reaction, to obtain self-healing materials. The prepared materials are studied in terms of gelation, swelling, thermal, and dynamic-mechanical analysis, with the aim of correlating relevant properties to their chemical structure. It is found that the furan/styrene ratio, as well as the molecular architecture, have a major influence on the properties. It is also found that the reversibility of the DA reaction is not complete in the solid state for materials with high cross-linking density. This study provides some important tools for the design of materials characterized by thermally reversible behavior, which find usually application as self-healing thermosets, coatings, or adhesives

Amphiphilic Copolymers Derived from Butanosolv Lignin and Acrylamide:Synthesis, Properties in Water Solution, and Potential Applications

In this work, a series of amphiphilic lignin-acrylamide copolymers was synthetized via a "grafting from"approach using α-butoxylated organosolv lignin. This lignin is obtained in high yield via a mild organosolv extraction with butanol and contains a well-defined modified β-O-4 structure that allows for site-selective modification of the primary alcohol in the γ-position. The modified lignin was then used as a precursor of amphiphilic copolymers by reaction with acrylamide, either via free radical polymerization or via atom transfer radical polymerization after converting the lignin into a suitable macroinitiator. The effect of the synthetic method and acrylamide/lignin ratio on the final properties was studied and compared. Relevant solution properties, in particular, shear viscosity and interfacial and surface tension, showed that different synthetic methods and polymer compositions allow a tuning of the solution behavior toward specific potential applications, such as emulsion stabilization or enhanced oil recovery. Furthermore, it was preliminarily shown that the obtained polymers may potentially display low cytotoxicity, further increasing the possibilities for applications

Effect of the polyketone aromatic pendent groups on the electrical conductivity of the derived MWCNTs-based nanocomposites

Electrically conductive plastics with a stable electric response within a wide temperature range are promising substitutes of conventional inorganic conductive materials. This study examines the preparation of thermoplastic polyketones (PK30) functionalized by the Paal-Knorr process with phenyl (PEA), thiophene (TMA), and pyrene (PMA) pendent groups with the aim of optimizing the non-covalent functionalization of multiwalled carbon nanotubes (MWCNTs) through π-π interactions. Among all the aromatic functionalities grafted to the PK30 backbone, the extended aromatic nuclei of PMA were found to be particularly effective in preparing well exfoliated and undamaged MWCNTs dispersions with a well-defined conductive percolative network above the 2 wt % of loading and in freshly prepared nanocomposites as well. The efficient and superior π-π interactions between PK30PMA and MWCNTs consistently supported the formation of nanocomposites with a highly stable electrical response after thermal solicitations such as temperature annealing at the softening point, IR radiation exposure, as well as several heating/cooling cycles from room temperature to 75 °C

Synthesis of poly(1-vinylimidazole)-block-poly(9-vinylcarbazole) copolymers via RAFT and their use in chemically responsive graphitic composites

This study reports the synthesis of novel poly(1-vinylimidazole)-b-poly(9-vinylcarbazole) (PVI-b-PVK) block copolymers with varying monomer ratios using reversible addition-fragmentation chain-transfer (RAFT) polymerization and their incorporation in responsive composite materials. Specifically, non-covalent exfoliation of two different conductive fillers, multi-walled carbon nanotubes (MWCNTs) or reduced graphene oxide (rGO), was studied. The percolation threshold of the synthesized nanocomposites was dependent on the polymer used for dispersion, showing a better affinity of the fillers for block copolymers with higher relative carbazole content. Resistivity measurements showed selective variation in the resistance signal when the materials were exposed to various organic solvents and acids, providing a good basis for the design of sensing devices

Thermoreversibly Cross-Linked EPM Rubber Nanocomposites with Carbon Nanotubes

Conductive rubber nanocomposites were prepared by dispersing conductive nanotubes (CNT) in thermoreversibly cross-linked ethylene propylene rubbers grafted with furan groups (EPM-g-furan) rubbers. Their features were studied with a strong focus on conductive and mechanical properties relevant for strain-sensor applications. The Diels-Alder chemistry used for thermoreversible cross-linking allows for the preparation of fully recyclable, homogeneous, and conductive nanocomposites. CNT modified with compatible furan groups provided nanocomposites with a relatively large tensile strength and small elongation at break. High and low sensitivity deformation experiments of nanocomposites with 5 wt % CNT (at the percolation threshold) displayed an initially linear sensitivity to deformation. Notably, only fresh samples displayed a linear response of their electrical resistivity to deformations as the resistance variation collapsed already after one cycle of elongation. Notwithstanding this mediocre performance as a strain sensor, the advantages of using thermoreversible chemistry in a conductive rubber nanocomposite were highlighted by demonstrating crack-healing by welding due to the joule effect on the surface and the bulk of the material. This will open up new technological opportunities for the design of novel strain-sensors based on recyclable rubbers

Maleimide Self-Reaction in Furan/Maleimide-Based Reversibly Crosslinked Polyketones:Processing Limitation or Potential Advantage?

Polymers crosslinked via furan/maleimide thermo-reversible chemistry have been extensively explored as reprocessable and self-healing thermosets and elastomers. For such applications, it is important that the thermo-reversible features are reproducible after many reprocessing and healing cycles. Therefore, side reactions are undesirable. However, we have noticed irreversible changes in the mechanical properties of such materials when exposing them to temperatures around 150 °C. In this work, we study whether these changes are due to the self-reaction of maleimide moieties that may take place at this rather low temperature. In order to do so, we prepared a furan-grafted polyketone crosslinked with the commonly used aromatic bismaleimide (1,1′-(methylenedi-4,1-phenylene)bismaleimide), and exposed it to isothermal treatments at 150 °C. The changes in the chemistry and thermo-mechanical properties were mainly studied by infrared spectroscopy, 1H-NMR, and rheology. Our results indicate that maleimide self-reaction does take place in the studied polymer system. This finding comes along with limitations over the reprocessing and self-healing procedures for furan/maleimide-based reversibly crosslinked polymers that present their softening (decrosslinking) point at relatively high temperatures. On the other hand, the side reaction can also be used to tune the properties of such polymer products via in situ thermal treatments

Hydrogel-in-hydrogel live bioprinting for guidance and control of organoids and organotypic cultures

Three-dimensional hydrogel-based organ-like cultures can be applied to study development, regeneration, and disease in vitro. However, the control of engineered hydrogel composition, mechanical properties and geometrical constraints tends to be restricted to the initial time of fabrication. Modulation of hydrogel characteristics over time and according to culture evolution is often not possible. Here, we overcome these limitations by developing a hydrogel-in-hydrogel live bioprinting approach that enables the dynamic fabrication of instructive hydrogel elements within pre-existing hydrogel-based organ-like cultures. This can be achieved by crosslinking photosensitive hydrogels via two-photon absorption at any time during culture. We show that instructive hydrogels guide neural axon directionality in growing organotypic spinal cords, and that hydrogel geometry and mechanical properties control differential cell migration in developing cancer organoids. Finally, we show that hydrogel constraints promote cell polarity in liver organoids, guide small intestinal organoid morphogenesis and control lung tip bifurcation according to the hydrogel composition and shape

Hydrogel-in-hydrogel live bioprinting for guidance and control of organoids and organotypic cultures

Three-dimensional hydrogel-based organ-like cultures can be applied to study development, regeneration, and disease in vitro. However, the control of engineered hydrogel composition, mechanical properties and geometrical constraints tends to be restricted to the initial time of fabrication. Modulation of hydrogel characteristics over time and according to culture evolution is often not possible. Here, we overcome these limitations by developing a hydrogel-in-hydrogel live bioprinting approach that enables the dynamic fabrication of instructive hydrogel elements within pre-existing hydrogel-based organ-like cultures. This can be achieved by crosslinking photosensitive hydrogels via two-photon absorption at any time during culture. We show that instructive hydrogels guide neural axon directionality in growing organotypic spinal cords, and that hydrogel geometry and mechanical properties control differential cell migration in developing cancer organoids. Finally, we show that hydrogel constraints promote cell polarity in liver organoids, guide small intestinal organoid morphogenesis and control lung tip bifurcation according to the hydrogel composition and shape