Selective AP-sequence Based Indoor Localization without Site Survey

In this paper, we propose an indoor localization system employing ordered sequence of access points (APs) based on received signal strength (RSS). Unlike existing indoor localization systems, our approach does not require any time-consuming and laborious site survey phase to characterize the radio signals in the environment. To be precise, we construct the fingerprint map by cutting the layouts of the interested area into regions with only the knowledge of positions of APs. This can be done offline within a second and has a potential for practical use. The localization is then achieved by matching the ordered AP-sequence to the ones in the fingerprint map. Different from traditional fingerprinting that employing all APs information, we use only selected APs to perform localization, due to the fact that, without site survey, the possibility in obtaining the correct AP sequence is lower if it involves more APs. Experimental results show that, the proposed system achieves localization accuracy < 5m with an accumulative density function (CDF) of 50% to 60% depending on the density of APs. Furthermore, we observe that, using all APs for localization might not achieve the best localization accuracy, e.g. in our case, 4 APs out of total 7 APs achieves the best performance. In practice, the number of APs used to perform localization should be a design parameter based on the placement of APs.Comment: VTC2016-Spring, 15-18 May 2016, Nanjing, Chin

The scattering of a cylindrical invisibility cloak: reduced parameters and optimization

We investigate the scattering of 2D cylindrical invisibility cloaks with simplified constitutive parameters with the assistance of scattering coefficients. We show that the scattering of the cloaks originates not only from the boundary conditions but also from the spatial variation of the component of permittivity/permeability. According to our formulation, we propose some restrictions to the invisibility cloak in order to minimize its scattering after the simplification has taken place. With our theoretical analysis, it is possible to design a simplified cloak by using some peculiar composites like photonic crystals (PCs) which mimic an effective refractive index landscape rather than offering effective constitutives, meanwhile canceling the scattering from the inner and outer boundaries.Comment: Accepted for J. Phys.

The black hole fundamental plane from a uniform sample of radio and X-ray emitting broad line AGNs

We derived the black hole fundamental plane relationship among the 1.4GHz radio luminosity (L_r), 0.1-2.4keV X-ray luminosity (L_X), and black hole mass (M) from a uniform broad line SDSS AGN sample including both radio loud and radio quiet X-ray emitting sources. We found in our sample that the fundamental plane relation has a very weak dependence on the black hole mass, and a tight correlation also exists between the Eddington luminosity scaled X-ray and radio luminosities for the radio quiet subsample. Additionally, we noticed that the radio quiet and radio loud AGNs have different power-law slopes in the radio--X-ray non-linear relationship. The radio loud sample displays a slope of 1.39, which seems consistent with the jet dominated X-ray model. However, it may also be partly due to the relativistic beaming effect. For radio quiet sample the slope of the radio--X-ray relationship is about 0.85, which is possibly consistent with the theoretical prediction from the accretion flow dominated X-ray model. We briefly discuss the reason why our derived relationship is different from some previous works and expect the future spectral studies in radio and X-ray bands on individual sources in our sample to confirm our result.Comment: 23 pages, 7 figures, ApJ accepte

Full QED+QCD Low-Energy Constants through Reweighting

The effect of sea quark electromagnetic charge on meson masses is investigated, and first results for full QED+QCD low-energy constants are presented. The electromagnetic charge for sea quarks is incorporated in quenched QED+full QCD lattice simulations by a reweighting method. The reweighting factor, which connects quenched and unquenched QED, is estimated using a stochastic method on 2+1 flavor dynamical domain-wall quark ensembles.Comment: 5 pages, 9 figures, REVTeX 4.1, v2: published versio

Particulate absorption of solar radiation: anthropogenic aerosols vs. dust

Particulate solar absorption is a critical factor in determining the value and even sign of the direct radiative forcing of aerosols. The heating to the atmosphere and cooling to the Earth’s surface caused by this absorption are hypothesized to have significant climate impacts. We find that anthropogenic aerosols play an important role around the globe in total particulate absorption of solar radiation. The global-average anthropogenic fraction in total aerosol absorbing optical depth exceeds 65% in all seasons. Combining the potentially highest dust absorption with the lowest anthropogenic absorption within our model range, this fraction would still exceed 47% in most seasons except for boreal spring (36%) when dust abundance reaches its peak. Nevertheless, dust aerosol is still a critical absorbing constituent over places including North Africa, the entire tropical Atlantic, and during boreal spring in most part of Eurasian continent. The equality in absorbing solar radiation of dust and anthropogenic aerosols appears to be particularly important over Indian subcontinent and nearby regions as well as North Africa.National Science Foundation (U.S.) (ATM-0329759)United States. National Aeronautics and Space Administration (NNX07AI49G)Massachusetts Institute of Technology. Joint Program on the Science & Policy of Global Chang

Investigation of multi-phase tubular permanent magnet linear generator for wave energy converters

In this article, an investigation into different magnetization topologies for a long stator tubular permanent magnet linear generator is performed through a comparison based on the cogging force disturbance, the power output, and the cost of the raw materials of the machines. The results obtained from finite element analysis simulation are compared with an existing linear generator described in [1]. To ensure accurate results, the generator developed in [1] is built with 3D CAD and simulated using the finite-element method, and the obtained results are verified with the source.The PRIMaRE project

Disjoint Covers in Replicated Heterogeneous Arrays

Reconfigurable chips are fabricated with redundant elements that can be used to replace the faulty elements. The fault cover problem consists of finding an assignment of redundant elements to the faulty elements such that all of the faults are repaired. In reconfigurable chips that consist of arrays of elements, redundant elements are configured as spare rows and spare columns. This paper considers the problem in which a chip contains several replicates of a heterogeneous array, one or more sets of spare rows, and one or more sets of spare columns. Each set of spare rows is identical to the set of rows in the array, and each set of spare columns is identical to the set of columns in the array. Specifically, an ith spare row can only be used to replace an ith row of an array, and similarly with spare columns. Repairing the chip reduces to finding a cover for the faults in each of the arrays. These covers must be disjoint; that is, a particular spare row or spare column can be used in the cover of at most one array. Results are presented for three fault cover problems that arise under these conditions

One-dimensional hydrogen atom with minimal length uncertainty and maximal momentum

We present exact energy eigenvalues and eigenfunctions of the one-dimensional hydrogen atom in the framework of the Generalized (Gravitational) Uncertainty Principle (GUP). This form of GUP is consistent with various theories of quantum gravity such as string theory, loop quantum gravity, black-hole physics, and doubly special relativity and implies a minimal length uncertainty and a maximal momentum. We show that the quantized energy spectrum exactly agrees with the semiclassical results.Comment: 10 pages, 1 figur

Dramatic Changes in the Electronic Structure Upon Transition to the Collapsed Tetragonal Phase in CaFe2As2

We use angle-resolved photoemission spectroscopy (ARPES) and density functional theory (DFT) calculations to study the electronic structure of CaFe$_2$As$_2$ in previously unexplored collapsed tetragonal (CT) phase. This unusual phase of the iron arsenic high temperature superconductors was hard to measure as it exists only under pressure. By inducing internal strain, via the post growth, thermal treatment of the single crystals, we were able to stabilize the CT phase at ambient-pressure. We find significant differences in the Fermi surface topology and band dispersion data from the more common orthorhombic-antiferromagnetic or tetragonal-paramagnetic phases, consistent with electronic structure calculations. The top of the hole bands sinks below the Fermi level, which destroys the nesting present in parent phases. The absence of nesting in this phase along with apparent loss of Fe magnetic moment, are now clearly experimentally correlated with the lack of superconductivity in this phase.Comment: 5 pages, 4 figures, accepted in PRB(RC