Speeding up liquid crystal SLMs using overdrive with phase change reduction

Nematic liquid crystal spatial light modulators (SLMs) with fast switching times and high diffraction efficiency are important to various applications ranging from optical beam steering and adaptive optics to optical tweezers. Here we demonstrate the great benefits that can be derived in terms of speed enhancement without loss of diffraction efficiency from two mutually compatible approaches. The first technique involves the idea of overdrive, that is the calculation of intermediate patterns to speed up the transition to the target phase pattern. The second concerns optimization of the target pattern to reduce the required phase change applied to each pixel, which in addition leads to a substantial reduction of variations in the intensity of the diffracted light during the transition. When these methods are applied together, we observe transition times for the diffracted light fields of about 1 ms, which represents up to a tenfold improvement over current approaches. We experimentally demonstrate the improvements of the approach for applications such as holographic image projection, beam steering and switching, and real-time control loops

The influence of non-imaging detector design on heralded ghost-imaging and ghost-diffraction examined using a triggered ICCD came

Ghost imaging and ghost diffraction can be realized by using the spatial correlations between signal and idler photons produced by spontaneous parametric down-conversion. If an object is placed in the signal (idler) path, the spatial correlations between the transmitted photons as measured by a single, non-imaging, “bucket” detector and a scanning detector placed in the idler (signal) path can reveal either the image or diffraction pattern of the object, whereas neither detector signal on its own can. The details of the bucket detector, such as its collection area and numerical aperture, set the number of transverse modes supported by the system. For ghost imaging these details are less important, affecting mostly the sampling time required to produce the image. For ghost diffraction, however, the bucket detector must be filtered to a single, spatially coherent mode. We examine this difference in behavour by using either a multi-mode or single-mode fibre to define the detection aperture. Furthermore, instead of a scanning detector we use a heralded camera so that the image or diffraction pattern produced can be measured across the full field of view. The importance of a single mode detection in the observation of ghost diffraction is equivalent to the need within a classical diffraction experiment to illuminate the aperture with a spatially coherent mode

Evidence of slow-light effects from rotary drag of structured beams

Self-pumped slow light, typically observed within laser gain media, is created by an intense pump field. By observing the rotation of a structured laser beam upon transmission through a spinning ruby window, we show that the slowing effect applies equally to both the dark and bright regions of the incident beam. This result is incompatible with slow-light models based on simple pulse-reshaping arising from optical bleaching. Instead, the slow-light effect arises from the long upper-state lifetime of the ruby and a saturation of the absorption, from which the Kramers–Kronig relation gives a highly dispersive phase index and a correspondingly high group index

A compact holographic optical tweezers instrument

Holographic optical tweezers have found many applications including the construction of complex micron-scale 3D structures and the control of tools and probes for position, force, and viscosity measurement. We have developed a compact, stable, holographic optical tweezers instrument which can be easily transported and is compatible with a wide range of microscopy techniques, making it a valuable tool for collaborative research. The instrument measures approximately 30×30×35 cm and is designed around a custom inverted microscope, incorporating a fibre laser operating at 1070 nm. We designed the control software to be easily accessible for the non-specialist, and have further improved its ease of use with a multi-touch iPad interface. A high-speed camera allows multiple trapped objects to be tracked simultaneously. We demonstrate that the compact instrument is stable to 0.5 nm for a 10 s measurement time by plotting the Allan variance of the measured position of a trapped 2 μm silica bead. We also present a range of objects that have been successfully manipulated

Optical trapping at gigapascal pressures

Diamond anvil cells allow the behavior of materials to be studied at pressures up to hundreds of gigapascals in a small and convenient instrument. However, physical access to the sample is impossible once it is pressurized. We show that optical tweezers can be used to hold and manipulate particles in such a cell, confining micron-sized transparent beads in the focus of a laser beam. Here, we use a modified optical tweezers geometry, allowing us to trap through an objective lens with a higher working distance, overcoming the constraints imposed by the limited angular acceptance of the anvil cell. We demonstrate the effectiveness of the technique by measuring water’s viscosity at pressures of up to 1.3 GPa. In contrast to previous viscosity measurements in anvil cells, our technique measures absolute viscosity and does not require scaling to the accepted value at atmospheric pressure. This method could also measure the frequency dependence of viscosity as well as being sensitive to anisotropy in the medium’s viscosity

An SLM-based Shack–Hartmann wavefront sensor for aberration correction in optical tweezers

Holographic optical tweezers allow the creation of multiple optical traps in 3D configurations through the use of dynamic diffractive optical elements called spatial light modulators (SLMs). We show that, in addition to controlling traps, the SLM in a holographic tweezers system can be both the principal element of a wavefront sensor and the corrective element in a closed-loop adaptive optics system. This means that aberrations in such systems can be estimated and corrected without altering the experimental setup. Aberrations are estimated using the Shack–Hartmann method, where an array of spots is projected into the sample plane and the distortion of this array is used to recover the aberration. The system can recover aberrations of up to ten wavelengths peak–peak, and is sensitive to aberrations much smaller than a wavelength. The spot pattern could also be analysed by eye, as a tool for aligning the system

Rotary photon drag enhanced by a slow-light medium

Transmission through a spinning window slightly rotates the polarization of the light, typically by a microradian. It has been predicted that the same mechanism should also rotate an image. Because this rotary photon drag has a contribution that is inversely proportional to the group velocity, the image rotation is expected to increase in a slow-light medium. Using a ruby window under conditions for coherent population oscillations, we induced an effective group index of about 1 million. The resulting rotation angle was large enough to be observed by the eye. This result shows that rotary photon drag applies to images as well as polarization. The possibility of switching between different rotation states may offer new opportunities for controlled image coding

iTweezers: optical micromanipulation controlled by an Apple iPad

The 3D interactive manipulation of multiple particles with holographic optical tweezers is often hampered by the control system. We use a multi-touch interface implemented on an Apple iPad to overcome many of the limitations of mouse-based control, and demonstrate an elegant and intuitive interface to multi-particle manipulation. This interface connects to the tweezers system hardware over a wireless network, allowing it to function as a remote monitor and control device

The Ministry of Foreign Affairs in Tsarist Russia, 1894-1914

SIGLEAvailable from British Library Document Supply Centre-DSC:3589.3815(34) / BLDSC - British Library Document Supply CentreGBUnited Kingdo