242 research outputs found
Coherent transport in graphene nanoconstrictions
We study the effect of a structural nanoconstriction on the coherent
transport properties of otherwise ideal zig-zag-edged infinitely long graphene
ribbons. The electronic structure is calculated with the standard one-orbital
tight-binding model and the linear conductance is obtained using the Landauer
formula. We find that, since the zero-bias current is carried in the bulk of
the ribbon, this is very robust with respect to a variety of constriction
geometries and edge defects. In contrast, the curve of zero-bias conductance
versus gate voltage departs from the staircase of the ideal case
as soon as a single atom is removed from the sample. We also find that
wedge-shaped constrictions can present non-conducting states fully localized in
the constriction close to the Fermi energy. The interest of these localized
states in regards the formation of quantum dots in graphene is discussed.Comment: 9 pages, 9 figure
Relación entre la variación horaria de la concentración de polen de Púmtago y la meteorología
XV lnternational A.P.L.E. Symposium of Palynolog
Comportamiento mecánico de la aleación W+1%Y2O3 en función de la atmósfera y la temperatura
Mediante ensayos de flexión en tres puntos se compara y evalúa el comportamiento mecánico de la aleación W-
1wt%Y2O3 con el W puro fabricados ambos mediante HIP. Se ha obtenido la tenacidad de fractura, la resistencia a
flexión y el límite elástico en atmósfera oxidante y de vacío en un intervalo de temperaturas comprendido entre -196 ºC, ensayos de inmersión en nitrógeno líquido, y 1200 ºC. Previamente, se ha medido la densidad, la dureza mediante ensayos Vickers y el módulo de elasticidad dinámico de los materiales. Además, la dureza y el módulo de elasticidad se han comparado con los obtenidos mediante ensayos instrumentados de nanoindentación. Finalmente se ha realizado un pequeño estudio de las superficies de fractura de las muestras ensayadas mediante microscopía electrónica de barrido para poder relacionar el modo de rotura de los materiales y las propiedades mecánicas macroscópicas con los
micromecanismos de fallo involucrados en función de la temperatura
Mechanical behavior of tungsten-vanadium-lanthana alloys as function of temperature
The mechanical behavior of three tungsten (W) alloys with vanadium (V) and lanthana (La2O3) additions (W–4%V, W–1%La2O3, W–4%V–1%La2O3) processed by hot isostatic pressing (HIP) have been compared with pure-W to analyze the influence of the dopants. Mechanical characterization was performed by three point bending (TPB) tests in an oxidizing air atmosphere and temperature range between 77 (immersion tests in liquid nitrogen) and 1273 K, through which the fracture toughness, flexural strength, and yield strength as function of temperature were obtained.
Results show that the V and La2O3 additions improve the mechanical properties and oxidation behavior, respectively. Furthermore, a synergistic effect of both dopants results in an extraordinary increase of the flexure strength, fracture toughness and resistance to oxidation compared to pure-W, especially at higher temperatures. In addition, a new experimental method was developed to obtain a very small notch tip radius (around 5–7 μm) and much more similar to a crack through the use of a new machined notch. The fracture toughness results were lower than those obtained with traditional machining of the notch, which can be explained with electron microscopy, observations of deformation in the rear part of the notch tip.
Finally, scanning electron microscopy (SEM) examination of the microstructure and fracture surfaces was used to determine and analyze the relationship between the macroscopic mechanical properties and the micromechanisms of failure involved, depending on the temperature and the dispersion of the alloy
Level of Physical Activity and Its Relationship to Self-Perceived Physical Fitness in Peruvian Adolescents
Background: Physical activity and physical fitness play an important role in adolescence. Both are considered to be indicators of the current and future health status of young adults. The main objective of this article was to report the normative values of the Physical Activity Questionnaire for Adolescents (PAQ-A) and the International Fitness Scale (IFIS) instruments in Peruvian school adolescents. Methods: A sample of 1229 participants (622 girls and 607 boys) aged between 12 and 17 years was used. The type of study was descriptive-comparative. All measures used were obtained by means of self-administered instruments. The PAQ-A was used to assess the level of physical activity and the IFIS to assess the self-perceived physical fitness level of the adolescents. Results: It was observed that the PAQ-A questionnaire results obtained from the total sample was 2.34; significantly higher for boys (2.41) compared with girls (2.27). For the IFIS, the total score was 3.07, with boys obtaining 3.13 and girls 2.97. Conclusions: It was concluded that there was a direct relationship between the level of PA and self-perceived PF in Peruvian adolescents. Furthermore, adolescent boys were more physically active than girls and they had a better self-perceived PF with the exception of flexibility. Finally, there was a higher weight category involved at the lower level of PA
Comportamiento mecánico en función de la temperatura de aleaciones wolframio-vanadio.
En esta investigación se evalúa el comportamiento mecánico del wolframio puro y de dos de sus aleaciones con contenidos de 2% y 4% de vanadio, fabricadas mediante prensado isostático en caliente (HIP). La caracterización mecánica se ha realizado mediante ensayos de flexión en tres puntos en atmósfera oxidante a distintas temperaturas comprendidas entre temperatura ambiente y 1000 ºC. Adicionalmente, se han realizado ensayos en inmersión en nitrógeno líquido para los de -197 ºC. Estos últimos valores pueden servir para una determinación más precisa de la temperatura la transición dúctil-frágil en éstos materiales, y de su posible comportamiento plástico o frágil a temperatura ambiente. Mediante estos ensayos ha sido posible obtener la tenacidad de fractura, la resistencia mecánica, el límite elástico y el módulo de elasticidad en función de la temperatura. Así mismo, se ha determinado la densidad y la dureza Vickers para dos cargas distintas, lo que permitido determinar la influencia de este parámetro en la medida realizada. Adicionalmente, se han examinado mediante microscopia electrónica de barrido las superficies de fractura. De esta forma ha sido posible determinar el modo de rotura y analizar la relación de las propiedades mecánicas macroscópicas con los micromecanismos de fallo involucrados
Validation of miR-1228-3p as Housekeeping for MicroRNA Analysis in Liquid Biopsies from Colorectal Cancer Patients
BACKGROUND: Circulating microRNA (miRNA) analysis is a growing research field. However, it usually requires an endogenous control or housekeeping (HK) in order to normalize expression of specific miRNAs throughout different samples. Unfortunately, no adequate HK for circulating miRNA analysis is still known in the colorectal cancer (CRC) context whereas several have been suggested. Hence, our aims were to validate the previously suggested miR-1228-3p as HK for CRC studies, to compare its suitability with the widely used miR-16-5p, and to evaluate the influence of hemolysis on both miRNAs. METHODS: We analyzed by quantitative reverse-transcription polymerase chain reaction (qRT-PCR) the expression of miR-1228-3p, miR-16-5p and the spike-in cel-miR-39 in a set of 297 plasmas (92 CRC, 101 advanced adenomas -AA-, and 100 controls) and 213 serum samples (59 CRC, 74 AA and 80 controls). We also analyzed both miRNAs depending on the hemolysis degree in 7 plasmas and 31 serums. RESULTS: Levels of miR-1228-3p and miR-16-5p did not show significant differences between groups although miR-16-5p exhibited more variability in plasma and serum samples. Importantly, the combination of cel-miR-39 and miR-1228-3p was the most stable one. Moreover, we observed that miR-16-5p was significantly influenced by hemolysis in contrast with miR-1228-3p that exhibited no correlation with this confounding factor in both biofluids. CONCLUSION: MiR-1228-3p has been validated as an adequate endogenous control for circulating miRNA analysis in CRC and AA liquid biopsies
Prospective transGEICAM study of the impact of the 21-gene Recurrence Score assay and traditional clinicopathological factors on adjuvant clinical decision making in women with estrogen receptor-positive (ER1) node-negative breast cancer
Este artículo ha sido publicado en Annals of Oncology.
Esta versión tiene Licencia Creative Commons CC-BY.This study examined the impact of the Recurrence Score (RS) in Spanish breast cancer patients and explored the associations between clinicopathological markers and likelihood of change in treatment recommendations.
Patients and methods: Enrollment was offered consecutively to eligible women with estrogen receptor-positive; human epidermal growth factor receptor 2-negative, node-negative breast cancer. Oncologists recorded treatment recommendation and confidence in it before and after knowing the patient’s RS.
Results: Treatment recommendation changed in 32% of 107 patients enrolled: in 21% from chemohormonal (CHT) to hormonal therapy (HT) and in 11% from HT to CHT. RS was associated with the likelihood of change from HT to CHT (P < 0.001) and from CHT to HT (P < 0.001). Confidence of oncologists in treatment recommendations increased for 60% of cases. Higher tumor grade (P = 0.007) and a high proliferative index (Ki-67) (P = 0.023) were significantly associated with a greater chance of changing from HT to CHT, while positive progesterone receptor status (P = 0.002) with a greater probability of changing from CHT to HT.
Conclusions: Results from the first prospective European study are consistent with published experience and use of the RS as proposed in European clinical practice guidelines and provide evidence on how Oncotype DX and clinicopathological factors are complementary and patient selection may be improved.This work was supported in part by Plan Nacional de Investigacio´ n Cientı´fica, Desarrollo e Innovacio´ n Tecnolo´ gica (I + D + I), iniciativa Ingenio 2010, programa Consolider and Instituto de Salud Carlos III (ISCIII)/FEDER (RD06/0020/0109, RD06/0020/0080, RD06/002/002); PN de I + D + I 2008-20011, and ISCIII/FEDER—Subdireccio´n General de Evaluacio´n y Fomento de la Investigacio´n (PS09/01285, PS09/01700, PS09/ 01296 FIS PI04417, FIS PI082031, CIT-090000-2008-010,);
DIUE Generalitat de Catalunya
Bidimensional spectroelectrochemistry: application of a new device in the study of a o-vanillin-copper(II) complex
A new bidimensional spectroelectrochemistry setup for UV-Vis absorption measurements has been developed. The new device has been used to follow electrochemical reactions using two different arrangements: 1) a near-normal configuration that supplies information about the processes taking place both on the electrode surface and in the solution adjacent to it, and 2) a long-optical-pathway configuration based on a mobile slit that controls the position of a light beam passing parallel and adjacent to the electrode surface providing information only about the processes taking place in solution during the electrochemical reaction. The new setup has been validated using o-tolidine, a typical reference system for spectroelectrochemistry. The electrochemical mechanism of oxidation/reduction of Cu(o-Va)2(H2O)2 complex (o-Va = o-Vanillin = 2-hydroxy-3-methoxybenzaldehyde) has been studied using bidimensional UV-Vis absorption spectroelectrochemistry. This Cu(II) complex exhibits antimutagenic, anticarcinogenic and superoxide dismutase mimic properties.Junta de Castilla y León (BU033U16), and Ministerio de Economía y Competitividad (CTQ2014-55583-R, CTQ2014-61914-EXP, CTQ2015-71955-REDT)CONICET, UNLP, Junta de Castilla y León (BU033U16), and Ministerio de Economía y Competitividad (CTQ2014-55583-R, CTQ2014-61914-EXP, CTQ2015-71955-REDT
- …