Bone Ingrowth into Porous Coated Canine Total Hip Replacements. Quantification by Backscattered Scanning Electron Microscopy and Image Analysis

Bone ingrowth into titanium fiber mesh porous-surfaced canine total hip replacement prostheses was evaluated and quantified using a computer assisted image analysis system attached to a scanning electron microscope equipped with a back scattered electron detector. Excellent contrast between the bone, the porous metal and the soft tissues resulted in the backscatter mode, allowing easy differentiation of these components in real time by the image analysis based on gray scales. By three weeks the mean (± standard deviation) amount of bone ingrowth expressed as a percentage of porous layer measured 7.2% (± 1.5%) for the acetabular components, and 3.9% (± 1.7%) for the femoral components. At six weeks the amount of bone ingrowth increased to 10.5% (± 1.3%) for the acetabular components and 8.5% (± 1.4%) for the femoral components. Cementless prosthetic fixation using porous surfaced prostheses holds great promise in joint replacement surgery, and the ability to quantitate the amount of bone ingrowth will permit the evaluation of the efficacy of various techniques to improve bone ingrowth

Mechanical failure of cemented femoral total hip replacement

A review, with 17 refs. Factors which affect mech. failure of cemented femoral total hip replacement, i.e., external load, materials, geometry, and interfaces, are discussed

Ninth and Tenth Order Virial Coefficients for Hard Spheres in D Dimensions

We evaluate the virial coefficients B_k for k<=10 for hard spheres in dimensions D=2,...,8. Virial coefficients with k even are found to be negative when D>=5. This provides strong evidence that the leading singularity for the virial series lies away from the positive real axis when D>=5. Further analysis provides evidence that negative virial coefficients will be seen for some k>10 for D=4, and there is a distinct possibility that negative virial coefficients will also eventually occur for D=3.Comment: 33 pages, 12 figure

Femoral revision knee Arthroplasty with Metaphyseal sleeves: the use of a stem is not mandatory of a structural point of view

Purpose Metaphyseal sleeves are an option for patients with severe metaphyseal bony defects requiring TKA revision. Although sleeves are usually used with stems, little is known about the exact contribution/need of the stem for the initial sleeve-bone interface stability, particularly in the femur, if the intramedullary canal is deformed or bowed. It is hypothesised that diaphyseal-stem addition increases the sleeve-femur interface stability and the strain-shielding effect on the metaphyseal femur relatively to the stemless condition. Material and methods Synthetic-femur was used to measure cortex strain behaviour and implant cortex micromotions for three techniques: only femoral-component, stemless-sleeve and stemmed-sleeve. Paired t-tests were performed to evaluate the statistical significance of the difference between mean principal strains and implant-cortex micromotions. Finite-element models were developed to assess the cancellous-bone strain behaviour and sleeve-bone interface micromotions; these models were validated against the measurements. Results Cortex strains are reduced significantly (p<0.05) in 83% of strain gauges on stemmed-sleeve, which compares with 33% in stemless condition. Both techniques presented a cancellous bone strain reduction of 50% at the distal region and an increase of nearly four times at the sleeve proximal region relative to the model only with the femoral component. Both techniques presented sleeve-bone micromotions amplitude below 50-150μm, suitable for bone ingrowth. Conclusions The use of a supplemental diaphyseal-stem potentiates the risk of cortex bone resorption compared with the stemless-sleeve condition; however, the stem is not vital for increasing the initial sleeve-bone stability and has a minor effect on the cancellous-bone strain behaviour. Of a purely structural point view, appears that the use of a diaphyseal-femoral-stem with the metaphyseal sleeve is not mandatory in the revision TKA which is particularly relevant in cases where the use of stems is impracticable.publishe

Upstream ORF affects MYCN translation depending on exon 1b alternative splicing

<p>Abstract</p> <p>Background</p> <p>The <it>MYCN </it>gene is transcribed into two major mRNAs: one full-length (<it>MYCN) </it>and one exon 1b-spliced (<it>MYCN</it>^{Δ1<it>b</it>}) mRNA. But nothing is known about their respective ability to translate the MYCN protein.</p> <p>Methods</p> <p>Plasmids were prepared to enable translation from the upstream (uORF) and major ORF of the two <it>MYCN </it>transcripts. Translation was studied after transfection in neuroblastoma SH-EP cell line. Impact of the upstream AUG on translation was evaluated after directed mutagenesis. Functional study with the two <it>MYCN </it>mRNAs was conducted by a cell viability assay. Existence of a new protein encoded by the <it>MYCN</it>^{Δ1<it>b </it>}uORF was explored by designing a rabbit polyclonal antibody against a specific epitope of this protein.</p> <p>Results</p> <p>Both are translated, but higher levels of protein were seen with <it>MYCN</it>^{Δ1<it>b </it>}mRNA. An upstream ORF was shown to have positive cis-regulatory activity on translation from <it>MYCN </it>but not from <it>MYCN</it>^{Δ1<it>b </it>}mRNA. In transfected SH-EP neuroblastoma cells, high MYCN dosage obtained with <it>MYCN</it>^{Δ1<it>b </it>}mRNA translation induces an antiapoptotic effect after serum deprivation that was not observed with low MYCN expression obtained with <it>MYCN </it>mRNA. Here, we showed that MYCNOT: <it>MYCN </it>Overlap Transcript, a new protein of unknown function is translated from the upstream AUG of <it>MYCN</it>^{Δ1<it>b </it>}mRNA.</p> <p>Conclusions</p> <p>Existence of upstream ORF in <it>MYCN </it>transcripts leads to a new level of MYCN regulation. The resulting MYCN dosage has a weak but significant anti-apoptotic activity after intrinsic apoptosis induction.</p