H2-Induced Pressure Broadening and Pressure Shift in the P-Branch of the v3 Band of CH4 from 300 to 700 K

For accurate modelling of observations of exoplanet atmospheres, quantification of the pressure broadening of infrared absorption lines for and by a variety of gases at elevated temperatures is needed. High-resolution high-temperature H2-pressure-broadened spectra are recorded for the CH4 v3-band P-branch. Measured linewidths for 116 transitions between 2840 and 3000 cm^{-1} with temperature and pressures ranging between 300 and 700 K, and 10 and 933 Torr, respectively, were used to find rotation- and tetrahedral-symmetry-dependent coefficients for pressure and temperature broadening and pressure-induced lineshifts. The new pressure-broadening data will be useful in radiative-transfer models for retrieving the properties of observed expolanet atmospheres.Comment: 23 pages, 10 figures, 7 tables, Resubmitted for 2nd round of revisions to JQSRT (Journal of Quantitative Spectroscopy & Radiative Transfer). Comments welcome

Hydrodynamic stability of swimming in ostraciid fishes: role of the carapace in the smooth trunkfish Lactophrys triqueter (Teleostei: Ostraciidae)

The hydrodynamic bases for the stability of locomotory motions in fishes are poorly understood, even for those fishes, such as the rigid-bodied smooth trunkfish Lactophrys triqueter, that exhibit unusually small amplitude recoil movements during rectilinear swimming. We have studied the role played by the bony carapace of the smooth trunkfish in generating trimming forces that self-correct for instabilities. The flow patterns, forces and moments on and around anatomically exact, smooth trunkfish models positioned at both pitching and yawing angles of attack were investigated using three methods: digital particle image velocimetry (DPIV), pressure distribution measurements, and force balance measurements. Models positioned at various pitching angles of attack within a flow tunnel produced well-developed counter-rotating vortices along the ventro-lateral keels. The vortices developed first at the anterior edges of the ventro-lateral keels, grew posteriorly along the carapace, and reached maximum circulation at the posterior edge of the carapace. The vortical flow increased in strength as pitching angles of attack deviated from 0°, and was located above the keels at positive angles of attack and below them at negative angles of attack. Variation of yawing angles of attack resulted in prominent dorsal and ventral vortices developing at far-field locations of the carapace; far-field vortices intensified posteriorly and as angles of attack deviated from 0°. Pressure distribution results were consistent with the DPIV findings, with areas of low pressure correlating well with regions of attached, concentrated vorticity. Lift coefficients of boxfish models were similar to lift coefficients of delta wings, devices that also generate lift through vortex generation. Furthermore, nose-down and nose-up pitching moments about the center of mass were detected at positive and negative pitching angles of attack, respectively. The three complementary experimental approaches all indicate that the carapace of the smooth trunkfish effectively generates self-correcting forces for pitching and yawing motions — a characteristic that is advantageous for the highly variable velocity fields experienced by trunkfish in their complex aquatic environment. All important morphological features of the carapace contribute to producing the hydrodynamic stability of swimming trajectories in this species

Analytical method to measure three-dimensional strain patterns in the left ventricle from single slice displacement data

Background: Displacement encoded Cardiovascular MR (CMR) can provide high spatial resolution measurements of three-dimensional (3D) Lagrangian displacement. Spatial gradients of the Lagrangian displacement field are used to measure regional myocardial strain. In general, adjacent parallel slices are needed in order to calculate the spatial gradient in the through-slice direction. This necessitates the acquisition of additional data and prolongs the scan time. The goal of this study is to define an analytic solution that supports the reconstruction of the out-of-plane components of the Lagrangian strain tensor in addition to the in-plane components from a single-slice displacement CMR dataset with high spatio-temporal resolution. The technique assumes incompressibility of the myocardium as a physical constraint. Results: The feasibility of the method is demonstrated in a healthy human subject and the results are compared to those of other studies. The proposed method was validated with simulated data and strain estimates from experimentally measured DENSE data, which were compared to the strain calculation from a conventional two-slice acquisition. Conclusion: This analytical method reduces the need to acquire data from adjacent slices when calculating regional Lagrangian strains and can effectively reduce the long scan time by a factor of two

Flow Patterns Around the Carapaces of Rigid-bodied, Multi-propulsor Boxfishes (Teleostei: Ostraciidae)

Boxfishes (Teleostei: Ostraciidae) are rigid-body, multi-propulsor swimmers that exhibit unusually small amplitude recoil movements during rectilinear locomotion. Mechanisms producing the smooth swimming trajectories of these fishes are unknown, however. Therefore, we have studied the roles the bony carapaces of these fishes play in generating this dynamic stability. Features of the carapaces of four morphologically distinct species of boxfishes were measured, and anatomically-exact stereolithographic models of the boxfishes were constructed. Flow patterns around each model were investigated using three methods: 1) digital particle image velocimetry (DPIV), 2) pressure distribution measurements, and 3) force balance measurements. Significant differences in both cross-sectional and longitudinal carapace morphology were detected among the four species. However, results from the three interrelated approaches indicate that flow patterns around the various carapaces are remarkably similar. DPIV results revealed that the keels of all boxfishes generate strong longitudinal vortices that vary in strength and position with angle of attack. In areas where attached, concentrated vorticity was detected using DPIV, low pressure also was detected at the carapace surface using pressure sensors. Predictions of the effects of both observed vortical flow patterns and pressure distributions on the carapace were consistent with actual forces and moments measured using the force balance. Most notably, the three complementary experimental approaches consistently indicate that the ventral keels of all boxfishes, and in some species the dorsal keels as well, effectively generate self-correcting forces for pitching motions—a characteristic that is advantageous for the highly variable velocity fields in which these fishes reside

Miniature illuminator for laser Doppler velocimeter assembled on micromachined silicon optical bench

We have built a miniature illuminator for Laser Doppler velocimeter on micromachined silicon optical bench utilizing a novel optical scheme. We used two intersecting coherent beams from the two opposing facets of semiconductor laser die to form a standing interference pattern needed for the particle detection and velocity measurement. Such devices are of interest to NASA for investigating wind patterns and dust loading on planets with atmosphere. They have been applied to problems where the liquid or gas flux must be characterized without disturbing the flow. In addition, the small probe volume makes possible local flow characterization and profiling. The device fabrication, and the results of the fringe characterization and velocity measurements are presented and discussed

Small modular reactor full scope core optimization using Cuckoo Optimization Algorithm

Small Modular Reactors (SMRs) with their excellent safety and economic features will be in high demand in the near future. Most SMR designs have longer burn-up cycle length with more fuel enrichment and smaller core size in comparison to the large conventional nuclear reactors. The small size of these reactors causes more neutron leakage (less core radius results in a higher area to volume ratio and more relative leakage). This feature of SMRs causes high values of maximum Power Peaking Factors (PPFs) through the core, so optimizing the safety parameters is of high necessity. Also, long burn-up cycle length needs a high initial excess reactivity, which results into use of some materials and methods to control this high excess reactivity. One of these methods is using a high number of Integral Fuel Burnable Absorber (IFBA) rods.In the present designs of IFBA rods, usually some amounts of fuel with lower enrichment are used at the top and bottom parts of the IFBA rods (known as cutback fuel) to flatten the axial PPFs. The small size of the SMRs (using a lower number of FAs) helps to have much less possible radial loading patterns (in comparison to the large reactors) and provides the possibility to optimize the axial variations in amounts of cutback fuel in IFBA rods simultaneously. Accordingly, the best axial and radial loading pattern according to the objective functions could be achieved. At the present work, the main goal is to optimize radial core loading pattern and axial variations of cutback fuel lengths at the IFBA rods of an SMR simultaneously using a multi-objective neutronic and thermal-hydraulic fitness function. The multi-objective fitness function includes burn-up cycle length, Minimum Departure from Nucleate Boiling (MDNBR), maximum and average radial and axial PPFs during the entire cycle lengths. The Cuckoo Optimization Algorithm (COA) as a new robust metaheuristic algorithm with high convergence speed and global optima achievement has been used. For the thermo-neutronic calculation, DRPACO package consists of the coupling system of DRAGON/ PARCS/COBRA codes have been used. Finally, the results of SMR core axial and radial loading pattern optimization using COA presents a core configuration with improvement in the core safety and economic parameters in comparison to the reference SMR cor

Noninvasive Stem Cell Labeling Using USPIO Technique and their Detection with MRI

Background: To date, several imaging techniques to track stem cells are used such as positron emission tomography (PET), single photon emission computed tomography (SPECT), Bioluminescence imaging (BLI), fluorescence imaging, CT scan and magnetic resonance imaging (MRI). Although, overall sensitivity of MRI compared to SPECT and Bioluminescence techniques are lower, but due to high spatial resolution (~100 mm), long term three-dimensional imaging capability, in vivo quick access to images in three different sections, and noninvasiveness it is being used as the method of choice. Methods: The present study is the search results for authors and sources of information in the field of molecular and cellular imaging to examine the problems and perspectives about stem cells labeling with Ultrasmall Super Paramagnetic Iron Oxide (USPIO) and their tracking by MRI. Results: With the advancement of technology, including quantum physics, chemistry, and computer software, MRI with an excellent spatial resolution and contrast, is surpasses other imaging modalities in the analysis of anatomical and pathological features and images of all body tissues. From the other side, advances in the astronomical science, chemistry and nanotechnology, high biocompatibility and cytotoxicity of nanoparticles, and due to analysis in the metabolic pathways of iron made the procedure easier; however, there are still several fundamental questions in understanding the mechanism of biological molecules in the living cells including: 1- How to detect not only the location but also the performance of the labeled cells? Probably combination of USPIO nanoparticles with other reporter genes as contrast agents for MRI and PET can simultaneously be used to overcome these limitations 2) How to trace stem cells from pre-clinical models to translate to humans? Up to now, due to issues of bioethics, little studies have been done in this area. 3) Whether the transplanted stem cells that have reached the target tissue, will remain or migrate? Despite the fact that cell proliferation and exocytosis are two main factors for long term protection of USPIO nanoparticles inside cells, their signals cannot be received for a long time. 4) What mechanisms cause stem cells reaching the target tissue to react with their environment? And 5) what is the number of transplanted cells in live tissue, and what is their half-life? Conclusion: This study showed that USPIO nanoparticles can enter the cell with a clear dose without any adverse biological effects and could be detected by SWI and T2* techniques under MRI (1.5 Tesla) scanner for almost one month. MRI as a secure mean can illustrate with optimal resolution the spatial-resolution and three-dimensional positions of the stem cells. Keywords: Ultrasmall Super Paramagnetic Iron Oxide (USPIO), labeled stem cell, in vivo tracking, MRI

An Egyptian green schist palette and an amazonite gemstone from the “Palace of the Copper Axes” at Batrawy, Jordan

The exploration of the “Palace of the Copper Axes”, the Early Bronze Age III palace of the easternmost city of Southern Levant during the 3rd millennium BC, was resumed in 2018, during the 14th season of excavation at Khirbet al-Batrawy in north-central Jordan, and completed in 2019. In the entrance hall of the palace, a square space with ceilings supported by four pillars, an Egyptian green schist palette, a cyan gemstone of amazonite and a pierced bead of fluorapatite were found buried under the destruction layer, while a barrel-shaped carnelian bead from Mesopotamia was found in the destruction layer just outside the Eastern Pavilion of the palace. These finds again testify to the inclusion of the palace and the city into a wide international trade network and its special connections with Pharaonic Egypt

A simplified modal-based method to quantify delamination in carbon fibre-reinforced plastic beam

This study contributes to our knowledge about the detection and recognition of carbon fibre-reinforced plastic (CFRP) composites by using a modal analysis technique. Delamination was artificially induced during the manufacturing process of CFRP beams so that the dimension and location of the artificial delamination were known. The first three longitudinal bending modes were considered for detecting, locating, and evaluating the delamination. Contrary to what is commonly practised, the sensor placed on the CFRP structure had a large mass in order to contribute actively to restricting the delamination and hence modifying the structure’s natural frequencies, thus making it much easier to monitor its health condition. The technique was implemented on a beam with a delamination gap of 9% of the beam’s length, positioned within the span of the beam. The results demonstrate that the proposed technique can be effective not only to locate the delamination but also to measure its extent accurately.Scopu