246 research outputs found

    Application of Confocal Laser Scanning Microscopy to Cytocompatibility Testing of Potential Orthopaedic Materials in Immortalised Osteoblast-Like Cell Lines

    Get PDF
    Confocal laser scanning microscopy (CLSM) was used in conjunction with in vitro cell culture to investigate cellular interactions with orthopaedic biomaterials. Transfected rat and human osteoblasts were seeded on two potential isoelastic hip prosthesis materials, carbon fibre reinforced polyetheretherketone (PEEK) and epoxy. Titanium 318 alloy was employed as a control. Determination of the material surface contour, an important factor influencing cellular adhesion, proliferation and function, was performed using the industry standard Talysurf® and compared to analogous results obtained using the CLSM. The latter technique consistently gave higher values of material roughness but offers the advantage that it can be used to correlate roughness with cell distribution on the same samples, whereas Talysurf® measurement of roughness requires clean rigid samples. Image analysis and processing, performed on cells after attachment and culture on the materials for 48 hours, provided cell morphology data. Cells cultured on titanium were larger, with a higher percentage of cytoplasm, than those grown on either of the other materials. The macroscopic surface of epoxy resulted in smaller cells with altered morphology, which orientated themselves along carbon fibres. In conclusion, we believe CLSM offers great potential for investigating the cellular interactions of biomaterials involving minimal sample preparation, non-invasive optical sectioning of samples and minimal opportunity for generation of cellular deformation and sample preparation artefacts

    Final design of the SLAC P2 Marx klystron modulator

    Full text link
    The SLAC P2 Marx has been under development for two years, and follows on the P1 Marx as an alternative to the baseline klystron modulator for the International Linear Collider. The P2 Marx utilizes a redundant architecture, air-insulation, a control system with abundant diagnostic access, and a novel nested droop correction scheme. This paper is an overview of the design of this modulator. There are several points of emphasis for the P2 Marx design. First, the modulator must be compatible with the ILC two-tunnel design. In this scheme, the modulator and klystron are located within a service tunnel with limited access and available footprint for a modulator. Access to the modulator is only practical from one side. Second, the modulator must have high availability. Robust components are not sufficient alone to achieve availability much higher than 99%. Therefore, redundant architectures are necessary. Third, the modulator must be relatively low cost. Because of the large number of stations in the ILC, the investment needed for the modulator components is significant. High-volume construction techniques which take advantage of an economy of scale must be utilized. Fourth, the modulator must be simple and efficient to maintain. If a modulator does become inoperable, the MTTR must be small. Fifth, even though the present application for the modulator is for the ILC, future accelerators can also take advantage of this development effort. The hardware, software, and concepts developed in this project should be designed such that further development time necessary for other applications is minimal

    BDSM Disclosure and Stigma Management: Identifying Opportunities for Sex Education

    Get PDF
    While participation in the activities like bondage, domination, submission/sadism, masochism that fall under the umbrella term BDSM is widespread, stigma surrounding BDSM poses risks to practitioners who wish to disclose their interest. We examined risk factors involved with disclosure to posit how sex education might diffuse stigma and warn of risks. Semi-structured interviews asked 20 adults reporting an interest in BDSM about their disclosure experiences. Most respondents reported their BDSM interests starting before age 15, sometimes creating a phase of anxiety and shame in the absence of reassuring information. As adults, respondents often considered BDSM central to their sexuality, thus disclosure was integral to dating. Disclosure decisions in nondating situations were often complex considerations balancing desire for appropriateness with a desire for connection and honesty. Some respondents wondered whether their interests being found out would jeopardize their jobs. Experiences with stigma varied widely

    Healthcare systems data in the context of clinical trials - A comparison of cardiovascular data from a clinical trial dataset with routinely collected data

    Get PDF
    BACKGROUND: Routinely-collected healthcare systems data (HSD) are proposed to improve the efficiency of clinical trials. A comparison was undertaken between cardiovascular (CVS) data from a clinical trial database with two HSD resources. METHODS: Protocol-defined and clinically reviewed CVS events (heart failure (HF), acute coronary syndrome (ACS), thromboembolic stroke, venous and arterial thromboembolism) were identified within the trial data. Data (using pre-specified codes) was obtained from NHS Hospital Episode Statistics (HES) and National Institute for Cardiovascular Outcomes Research (NICOR) HF and myocardial ischaemia audits for trial participants recruited in England between 2010 and 2018 who had provided consent. The primary comparison was trial data versus HES inpatient (APC) main diagnosis (Box-1). Correlations are presented with descriptive statistics and Venn diagrams. Reasons for non-correlation were explored. RESULTS: From 1200 eligible participants, 71 protocol-defined clinically reviewed CVS events were recorded in the trial database. 45 resulted in a hospital admission and therefore could have been recorded by either HES APC/ NICOR. Of these, 27/45 (60%) were recorded by HES inpatient (Box-1) with an additional 30 potential events also identified. HF and ACS were potentially recorded in all 3 datasets; trial data recorded 18, HES APC 29 and NICOR 24 events respectively. 12/18 (67%) of the HF/ACS events in the trial dataset were recorded by NICOR. CONCLUSION: Concordance between datasets was lower than anticipated and the HSD used could not straightforwardly replace current trial practices, nor directly identify protocol-defined CVS events. Further work is required to improve the quality of HSD and consider event definitions when designing clinical trials incorporating HSD

    Effect of starch-based biomaterials on the in vitro proliferation and viability of osteoblast-like cells

    Get PDF
    The cytotoxicity of starch-based polymers was investigated using different methodologies. Poly-L-lactic acid (PLLA) was used as a control for comparison purposes. Extracts of four different starch-based blends (corn starch and ethylene vinyl alcohol (SEVA-C), corn starch and cellulose acetate (SCA), corn starch and polycaprolactone (SPCL) and starch and poly-lactic acid (SPLA70) were prepared in culture medium and their toxicity was analysed. Osteoblast-like cells (SaOs-2) were incubated with the extracts and cell viability was assessed using the MTT test and a lactate dehydrogenase (LDH) assay. In addition DNA and total protein were quantified in order to evaluate cell proliferation. Cells were also cultured in direct contact with the polymers for 3 and 7 days and observed in light and scanning electron microscopy (SEM). LDH and DNA quantification revealed to be the most sensitive tests to assess respectively cell viability and cell proliferation after incubation with starch-based materials and PLLA. SCA was the starch blend with higher cytotoxicity index although similar to PLLA polymer. Cell adhesion tests confirmed the worst performance of the blend of starch with cellulose acetate but also showed that SPCL does not perform as well as it could be expected. All the other materials were shown to present a comparable behaviour in terms of cell adhesion showing slight differences in morphology that seem to disappear for longer culture times. The results of this study suggest that not only the extract of the materials but also their three-dimensional form has to be biologically tested in order to analyse material-associated parameters that are not possible to consider within the degradation extract. In this study, the majority of the starch-based biomaterials presented very promising results in terms of cytotoxicity, comparable to the currently used biodegradable PLLA which might lead the biocompatibility evaluation of those novel biomaterials to other studies.Fundação para a Ciência e a Tecnologia (FCT

    Quality of Life in Men With Prostate Cancer Randomly Allocated to Receive Docetaxel or Abiraterone in the STAMPEDE Trial

    Get PDF
    PURPOSE: Docetaxel and abiraterone acetate plus prednisone or prednisolone (AAP) both improve survival when commenced alongside standard of care (SOC) androgen deprivation therapy in locally advanced or metastatic hormone-sensitive prostate cancer. Thus, patient-reported quality of life (QOL) data may guide treatment choices. METHODS: A group of patients within the STAMPEDE trial were contemporaneously enrolled with the possibility of being randomly allocated to receive either docetaxel + SOC or AAP + SOC. A mixed-model assessed QOL in those who had completed at least one QLQ-C30 + PR25 questionnaire. The primary outcome measure was difference in global-QOL (QLQ-C30 Q29&30) between patients allocated to docetaxel + SOC or AAP + SOC over the 2 years after random assignment, with a predefined criterion for clinically meaningful difference of > 4.0 points. Secondary outcome measures included longitudinal comparison of functional domains, pain, and fatigue, plus global-QOL at defined timepoints. RESULTS: Five hundred fifteen patients (173 docetaxel + SOC and 342 AAP + SOC) were included. Baseline characteristics, proportion of missing data, and mean baseline global-QOL scores (docetaxel + SOC 77.8 and AAP + SOC 78.0) were similar. Over the 2 years following random assignment, the mean modeled global-QOL score was +3.9 points (95% CI, +0.5 to +7.2; P = .022) higher in patients allocated to AAP + SOC. Global-QOL was higher for patients allocated to AAP + SOC over the first year (+5.7 points, 95% CI, +3.0 to +8.5; P < .001), particularly at 12 (+7.0 points, 95% CI, +3.0 to +11.0; P = .001) and 24 weeks (+8.3 points, 95% CI, +4.0 to +12.6; P < .001). CONCLUSION: Patient-reported QOL was superior for patients allocated to receive AAP + SOC, compared with docetaxel + SOC over a 2-year period, narrowly missing the predefined value for clinical significance. Patients receiving AAP + SOC reported clinically meaningful higher global-QOL scores throughout the first year following random assignment

    Healthcare systems data in the context of clinical trials ? A comparison of cardiovascular data from a clinical trial dataset with routinely collected data

    Get PDF
    Background Routinely-collected healthcare systems data (HSD) are proposed to improve the efficiency of clinical trials. A comparison was undertaken between cardiovascular (CVS) data from a clinical trial database with two HSD resources. Methods Protocol-defined and clinically reviewed CVS events (heart failure (HF), acute coronary syndrome (ACS), thromboembolic stroke, venous and arterial thromboembolism) were identified within the trial data. Data (using pre-specified codes) was obtained from NHS Hospital Episode Statistics (HES) and National Institute for Cardiovascular Outcomes Research (NICOR) HF and myocardial ischaemia audits for trial participants recruited in England between 2010 and 2018 who had provided consent. The primary comparison was trial data versus HES inpatient (APC) main diagnosis (Box-1). Correlations are presented with descriptive statistics and Venn diagrams. Reasons for non-correlation were explored. Results From 1200 eligible participants, 71 protocol-defined clinically reviewed CVS events were recorded in the trial database. 45 resulted in a hospital admission and therefore could have been recorded by either HES APC/ NICOR. Of these, 27/45 (60%) were recorded by HES inpatient (Box-1) with an additional 30 potential events also identified. HF and ACS were potentially recorded in all 3 datasets; trial data recorded 18, HES APC 29 and NICOR 24 events respectively. 12/18 (67%) of the HF/ACS events in the trial dataset were recorded by NICOR. Conclusion Concordance between datasets was lower than anticipated and the HSD used could not straightforwardly replace current trial practices, nor directly identify protocol-defined CVS events. Further work is required to improve the quality of HSD and consider event definitions when designing clinical trials incorporating HSD

    Cytocompatibility of Medical Biomaterials Containing Nickel by Osteoblasts: a Systematic Literature Review

    Get PDF
    The present review is based on a survey of 21 studies on the cytocompatibility of medical biomaterials containing nickel, as assessed by cell culture of human and animal osteoblasts or osteoblast-like cells. Among the biomaterials evaluated were stainless steel, NiTi alloys, pure Ni, Ti, and other pure metals. The materials were either commercially available, prepared by the authors, or implanted by various techniques to generate a protective layer of oxides, nitrides, acetylides. The observation that the layers significantly reduced the initial release of metal ions and increased cytocompatibility was confirmed in cell culture experiments. Physical and chemical characterization of the materials was performed. This included, e.g., surface characterization (roughness, wettability, corrosion behavior, quantity of released ions, microhardness, and characterization of passivation layer). Cytocompatibility tests of the materials were conducted in the cultures of human or animal osteoblasts and osteoblast-like cells. The following assays were carried out: cell proliferation and viability test, adhesion test, morphology (by fluorescent microscopy or SEM). Also phenotypic and genotypic markers were investigated. In the majority of works, it was found that the most cytocompatible materials were stainless steel and NiTi alloy. Pure Ni was rendered and less cytocompatible. All the papers confirmed that the consequence of the formation of protective layers was in significant increase of cytocompatibility of the materials. This indicates the possible further modifications of the manufacturing process (formation of the passivation layer)
    corecore