571 research outputs found
High-Risk Drinking Levels Among Master\u27s-Level Graduate Students at a Mid-Size Midwestern University
This study has quantitatively examined the high-risk drinking levels of graduate students at a mid-size Midwestern university. The sample (N=204) was studied to investigate the hypothesis that the high-risk drinking level of graduate students is lower than the average national high-risk drinking levels of undergraduate college students. Specifically this study has quantitatively (Core Alcohol & Drug Survey) evaluated the at-risk drinking levels of graduate students and sought answers to the following thesis questions: 1) Do graduate students who participate in at least one hour of service per week report a lower level of high-risk drinking than those who do not participate in service? 2) Do graduate students who belong to social Greek-lettered organizations have a higher level of high-risk drinking than those graduate students who do not belong to Greek-lettered organizations? 3) Do undergraduates\u27 high-risk drinking behaviors predict their high-risk drinking as graduate students? 4) Do traditional-age graduate students (less than 25 years of age) drink more than non-traditional graduate students (25 years of age and higher)
LC-MS analysis of aerosol particles from the oxidation of ?-pinene by ozone and OH-radicals
International audienceThe time resolved chemical composition of aerosol particles, formed by the oxidation of alpha-pinene has been investigated by liquid chromatography/mass spectrometry (LC-MS) using negative and positive ionisation methods (ESI(-) and APCI(+)). The experiments were performed at the EUPHORE facility in Valencia (Spain) under various experimental conditions, including dark ozone reactions, photosmog experiments with low NOx mixing ratios and reaction with OH radicals in the absence of NOx (H2O2-photolysis). Particles were sampled on PTFE f ilters at different stages of the reaction and extracted with methanol. The predominant products from alpha-pinene in the particulate phase are cis-pinic acid, cis-pinonic acid and hydroxy-pinonic acid isomers. Another major compound with molecular weight 172 was detected, possibly a hydroxy-carboxylic acid. These major compounds account for 50% to 80% of the identified aerosol products, depending on the time of sampling and type of experiment. In addition, more than 20 different products have been detected and structures have been tentatively assigned based on their molecular weight and responses to the different ionisation modes. The different experiments performed showed that the aerosol formation is mainly caused by the ozonolysis reaction. The highest aerosol yields were observed in the dark ozone experiments, for which also the highest ratios of mass of identified products to the formed aerosol mass were found (30% to 50%, assuming a density of 1 g cm-3)
Seasonal cycle and temperature dependence of pinene oxidation products, dicarboxylic acids and nitrophenols in fine and coarse air particulate matter
Filter samples of fine and coarse air particulate matter (PM) collected over a period of one year in central Europe (Mainz, Germany) were analyzed for water-soluble organic compounds (WSOCs), including the α- and β-pinene oxidation products pinic acid, pinonic acid and 3-methyl-1,2,3-butanetricarboxylic acid (3-MBTCA), as well as a variety of dicarboxylic acids and nitrophenols. Seasonal variations and other characteristic features in fine, coarse, and total PM (TSP) are discussed with regard to aerosol sources and sinks in comparison to data from other studies and regions. The ratios of adipic acid and phthalic acid to azelaic acid indicate that the investigated aerosol samples were mainly influenced by biogenic sources. A strong Arrhenius-type correlation was found between the 3-MBTCA concentration and inverse temperature (<i>R</i><sup>2</sup> = 0.79, <i>n</i> = 52, <i>E</i><sub>a</sub> = 126 &plusmn; 10 kJ mol<sup>−1</sup>, temperature range 275–300 K). Model calculations suggest that the temperature dependence observed for 3-MBTCA can be explained by enhanced photochemical production due to an increase of hydroxyl radical (OH) concentration with increasing temperature, whereas the influence of gas-particle partitioning appears to play a minor role. The results indicate that the OH-initiated oxidation of pinonic acid is the rate-limiting step in the formation of 3-MBTCA, and that 3-MBTCA may be a suitable tracer for the chemical aging of biogenic secondary organic aerosol (SOA) by OH radicals. An Arrhenius-type temperature dependence was also observed for the concentration of pinic acid (<i>R</i><sup>2</sup> = 0.60, <i>n</i> = 56, <i>E</i><sub>a</sub> = 84 &plusmn; 9 kJ mol<sup>−1</sup>); it can be tentatively explained by the temperature dependence of biogenic pinene emission as the rate-limiting step of pinic acid formation
Nanopores: maltoporin channel as a sensor for maltodextrin and lambda-phage
BACKGROUND: To harvest nutrition from the outside bacteria e.g. E. coli developed in the outer cell wall a number of sophisticated channels called porins. One of them, maltoporin, is a passive specific channel for the maltodextrin uptake. This channel was also named LamB as the bacterial virus phage Lambda mis-uses this channel to recognise the bacteria. The first step is a reversible binding followed after a lag phase by DNA injection. To date little is known about the binding capacity and less on the DNA injection mechanism. To elucidate the mechanism and to show the sensitivity of our method we reconstituted maltoporin in planar lipid membranes. Application of an external transmembrane electric field causes an ion current across the channel. Maltoporin channel diameter is around a few Angstroem. At this size the ion current is extremely sensitive to any modification of the channels surface. Protein conformational changes, substrate binding etc will cause fluctuations reflecting the molecular interactions with the channel wall. The recent improvement in ion current fluctuation analysis allows now studying the interaction of solutes with the channel on a single molecular level. RESULTS: We could demonstrate the asymmetry of the bacterial phage Lambda binding to its natural receptor maltoporin. CONCLUSION: We suggest that this type of measurement can be used as a new type of biosensors
Fast and Successful Management of Intraocular Inflammation with a Single Intravitreal Dexamethasone Implant
Purpose: To investigate the efficacy and safety of a single dexamethasone intravitreal implant (Ozurdex®, 700 µg).
Methods: In this prospective noncomparative case series, 84 patients (54 females) received a dexamethasone intravitreal implant. At weeks 4, 12 and 24 after the injection, vitreous haze, macular thickness and best corrected visual acuity (BCVA) were assessed and adverse events reported.
Results: Clearance of vitreous haze could be achieved after 4 weeks in 61% of all eyes (p < 0.001) and remained significant until week 24 (p < 0.001). This was paralleled by a reduction of central retinal thickness after 4 (p < 0.001), 12 (p < 0.001) and 24 weeks (p < 0.006). Significant and fast improvement of BCVA was already achieved after 4 weeks (p < 0.001) but vanished by week 24. Intraocular pressure reached ≥35 mm Hg in 3 eyes and was significantly more frequent in intermediate uveitis compared to posterior uveitis (p < 0.016).
Conclusions: The dexamethasone implant is effective in controlling intraocular posterior segment inflammation and reduces central retinal thickness fast and effectively. © 2014 S. Karger AG, Basel
Characterisation of aroma-active compounds in commercial aged rums
The volatile compounds in commercial rums declared as aged 3, 7, 10, and 15 years were isolated by solvent extraction followed by solvent-assisted flavour evaporation and analysed by gas chromatography-olfactometry. According to the aroma extract dilution analysis, 19 potentially aroma-active compounds in the flavour dilution (FD) factor range of 8 to 1024 were found. Fifteen of them were present in at least one aged rum at FD factor≥128. Clear differences in the FD factors of these odourants between each of the aged rums suggested that they contributed to their unique sensory profiles
Oligomer formation during gas-phase ozonolysis of small alkenes and enol ethers: new evidence for the central role of the Criegee Intermediate as oligomer chain unit
An important fraction of secondary organic aerosol (SOA) formed by atmospheric oxidation of diverse volatile organic compounds (VOC) has recently been shown to consist of high-molecular weight oligomeric species. In our previous study (Sadezky et al., 2006), we reported the identification and characterization of oligomers as main constituents of SOA from gas-phase ozonolysis of small enol ethers. These oligomers contained repeated chain units of the same chemical composition as the main Criegee Intermediates (CI) formed during the ozonolysis reaction, which were CH<sub>2</sub>O<sub>2</sub> (mass 46) for alkyl vinyl ethers (AVE) and C<sub>2</sub>H<sub>4</sub>O<sub>2</sub> (mass 60) for ethyl propenyl ether (EPE). In the present work, we extend our previous study to another enol ether (ethyl butenyl ether EBE) and a variety of structurally related small alkenes (<i>trans</i>-3-hexene, <i>trans</i>-4-octene and 2,3-dimethyl-2-butene). <br><br> Experiments have been carried out in a 570 l spherical glass reactor at atmospheric conditions in the absence of seed aerosol. SOA formation was measured by a scanning mobility particle sizer (SMPS). SOA filter samples were collected and chemically characterized off-line by ESI(+)/TOF MS and ESI(+)/TOF MS/MS, and elemental compositions were determined by ESI(+)/FTICR MS and ESI(+)/FTICR MS/MS. The results for all investigated unsaturated compounds are in excellent agreement with the observations of our previous study. Analysis of the collected SOA filter samples reveal the presence of oligomeric compounds in the mass range 200 to 800 u as major constituents. The repeated chain units of these oligomers are shown to systematically have the same chemical composition as the respective main Criegee Intermediate (CI) formed during ozonolysis of the unsaturated compounds, which is C<sub>3</sub>H<sub>6</sub>O<sub>2</sub> (mass 74) for ethyl butenyl ether (EBE), <i>trans</i>-3-hexene, and 2,3-dimethyl-2-butene, and C<sub>4</sub>H<sub>8</sub>O<sub>2</sub> (mass 88) for extit{trans}-4-octene. Analogous fragmentation pathways among the oligomers formed by gas-phase ozonolysis of the different alkenes and enol ethers in our present and previous study, characterized by successive losses of the respective CI-like chain unit as a neutral fragment, indicate a similar principal structure. In this work, we confirm the basic structure of a linear oligoperoxide &ndash; [CH(R)-O-O]<sub>n</sub> &ndash; for all detected oligomers, with the repeated chain unit CH(R)OO corresponding to the respective major CI. The elemental compositions of parent ions, fragment ions and fragmented neutrals determined by accurate mass measurements with the FTICR technique allow us to assign a complete structure to the oligomer molecules. We suggest that the formation of the oligoperoxidic chain units occurs through a new gas-phase reaction mechanism observed for the first time in our present work, which involves the addition of stabilized CI to organic peroxy radicals. Furthermore, copolymerization of CI simultaneously formed in the gas phase from two different unsaturated compounds is shown to occur during the ozonolysis of a mixture of extit{trans}-3-hexene and ethyl vinyl ether (EVE), leading to formation of oligomers with mixed chain units C<sub>3</sub>H<sub>6</sub>O<sub>2</sub> (mass 74) and CH<sub>2</sub>O<sub>2</sub> (mass 46). We therefore suggest oligoperoxide formation by repeated peroxy radical-stabilized CI addition to be a general reaction pathway of small stabilized CI in the gas phase, which represents an alternative way to high-molecular products and thus contributes to SOA formation
Organic aerosol and global climate modelling: a review
The present paper reviews existing knowledge with regard to Organic Aerosol (OA) of importance for global climate modelling and defines critical gaps needed to reduce the involved uncertainties. All pieces required for the representation of OA in a global climate model are sketched out with special attention to Secondary Organic Aerosol (SOA): The emission estimates of primary carbonaceous particles and SOA precursor gases are summarized. The up-to-date understanding of the chemical formation and transformation of condensable organic material is outlined. Knowledge on the hygroscopicity of OA and measurements of optical properties of the organic aerosol constituents are summarized. The mechanisms of interactions of OA with clouds and dry and wet removal processes parameterisations in global models are outlined. This information is synthesized to provide a continuous analysis of the flow from the emitted material to the atmosphere up to the point of the climate impact of the produced organic aerosol. The sources of uncertainties at each step of this process are highlighted as areas that require further studies
- …