Capillary focusing close to a topographic step: Shape and instability of confined liquid filaments

Step-emulsification is a microfluidic technique for droplet generation which relies on the abrupt decrease of confinement of a liquid filament surrounded by a continuous phase. A striking feature of this geometry is the transition between two distinct droplet breakup regimes, the "step-regime" and "jet-regime", at a critical capillary number. In the step-regime, small and monodisperse droplets break off from the filament directly at a topographic step, while in the jet-regime a jet protrudes into the larger channel region and large plug-like droplets are produced. We characterize the breakup behavior as a function of the filament geometry and the capillary number and present experimental results on the shape and evolution of the filament for a wide range of capillary numbers in the jet-regime. We compare the experimental results with numerical simulations. Assumptions based on the smallness of the depth of the microfluidic channel allow to reduce the governing equations to the Hele-Shaw problem with surface tension. The full nonlinear equations are then solved numerically using a volume-of-fluid based algorithm. The computational framework also captures the transition between both regimes, offering a deeper understanding of the underlying breakup mechanism

Remotely piloted LTA vehicle for surveillance

Various aspects of a remotely piloted mini-LTA vehicle for surveillance, monitoring and measurement for civilian and military applications are considered. Applications, operations and economics are discussed

Self-assembled granular walkers

Mechanisms of locomotion in microscopic systems are of great interest not only for technological applications, but also for the sake of understanding, and potentially harnessing, processes far from thermal equilibrium. Down-scaling is a particular challenge, and has led to a number of interesting concepts including thermal ratchet systems and asymmetric swimmers. Here we present a system which is particularly intriguing, as it is self-assembling and uses a robust mechanism which can be implemented in various settings. It consists of small spheres of different size which adhere to each other, and are subject to an oscillating (zero average) external force eld. An inherent nonlinearity in the mutual force network leads to force rectication and hence to locomotion. We present a model that accounts for the observed behaviour and demonstrates the wide applicability and potential scalability of the concept.Comment: 17 pages, 4 figure

Thermal noise influences fluid flow in thin films during spinodal dewetting

Experiments on dewetting thin polymer films confirm the theoretical prediction that thermal noise can strongly influence characteristic time-scales of fluid flow and cause coarsening of typical length scales. Comparing the experiments with deterministic simulations, we show that the Navier-Stokes equation has to be extended by a conserved bulk noise term to accomplish the observed spectrum of capillary waves. Due to thermal fluctuations the spectrum changes from an exponential to a power law decay for large wavevectors. Also the time evolution of the typical wavevector of unstable perturbations exhibits noise induced coarsening that is absent in deterministic hydrodynamic flow.Comment: 4 pages, 3 figure

Shape of a liquid front upon dewetting

We examine the profile of a liquid front of a film that is dewetting a solid substrate. Since volume is conserved, the material that once covered the substrate is accumulated in a rim close to the three phase contact line. Theoretically, such a profile of a Newtonian liquid resembles an exponentially decaying harmonic oscillation that relaxes into the prepared film thickness. For the first time, we were able to observe this behavior experimentally. A non-Newtonian liquid - a polymer melt - however, behaves differently. Here, viscoelastic properties come into play. We will demonstrate that by analyzing the shape of the rim profile. On a nm scale, we gain access to the rheology of a non-Newtonian liquid.Comment: 4 pages, 4 figure

Isolated development of inner (wall) caries like lesions in a bacterial-based in vitro model

The study conducted in a bacterial-based in vitro caries model aimed to determine whether typical inner secondary caries lesions can be detected at cavity walls of restorations with selected gap widths when the development of outer lesions is inhibited. Sixty bovine tooth specimens were randomly assigned to the following groups: test group 50 (TG50; gap, 50μm), test group 100 (TG100; gap, 100μm), test group 250 (TG250; gap, 250μm) and a control group (CG; gap, 250μm). The outer tooth surface of the test group specimens was covered with an acid-resistant varnish to inhibit the development of an outer caries lesion. After incubation in the caries model, the area of demineralization at the cavity wall was determined by confocal laser scanning microscopy. All test group specimens demonstrated only wall lesions. The CG specimens developed outer and wall lesions. The TG250 specimens showed significantly less wall lesion area compared to the CG (p < 0.05). In the test groups, a statistically significant increase (p < 0.05) in lesion area could be detected in enamel between TG50 and TG250 and in dentine between TG50 and TG100. In conclusion, the inner wall lesions of secondary caries can develop without the presence of outer lesions and therefore can be regarded as an entity on their own. The extent of independently developed wall lesions increased with gap width in the present settin