CubeSats as pathfinders for planetary detection: the FIRST-S satellite

The idea behind FIRST (Fibered Imager foR a Single Telescope) is to use single-mode fibers to combine multiple apertures in a pupil plane as such as to synthesize a bigger aperture. The advantages with respect to a pure imager are i) relaxed tolerance on the pointing and cophasing, ii) higher accuracy in phase measurement, and iii) availability of compact, precise, and active single-mode optics like Lithium Niobate. The latter point being a huge asset in the context of a space mission. One of the problems of DARWIN or SIM-like projects was the difficulty to find low cost pathfinders missions. But the fact that Lithium Niobate optic is small and compact makes it easy to test through small nanosats missions. Moreover, they are commonly used in the telecom industry, and have already been tested on communication satellites. The idea of the FIRST-S demonstrator is to spatialize a 3U CubeSat with a Lithium Niobate nulling interferometer. The technical challenges of the project are: star tracking, beam combination, and nulling capabilities. The optical baseline of the interferometer would be 30 cm, giving a 2.2 AU spatial resolution at distance of 10 pc. The scientific objective of this mission would be to study the visible emission of exozodiacal light in the habitable zone around the closest stars.Comment: SPIE 2014 -- Astronomical telescopes and instrumentation -- Montrea

Modelling of necking during creep of grade 91 steel

International audienceThis paper addresses a necking model used for predicting creep lifetimes of Grade 91. Creep results from more than 15 tests at 500-600°C on Grade 91 are used. One of them fractured after 160×103h at 500°C. Hart's necking model using the Norton power-law rule correctly predicts lifetimes up to 60×103h at 500°C. However, it overestimates lifetimes in all other loading conditions. The necking model including material creep softening, appearing during the tertiary stage, predicts lifetimes differing from the experimental results by less than 20% for lifetimes up to 160×103h at 500°C and 50% up to 94×103h at 600°C. These predictions are reasonable with respect to experimental scatter. The model predicts the time evolution of the necking section in agreement with an interrupted creep test at least up to 75% of the experimental lifetime. Two lifetime predictions are deduced from this necking model. For a large number of tempered martensitic steels, these two criteria bound the experimental lifetimes up to 200×103h at 500-700°C

Effect of Porcine circovirus 2 (PCV-2) maternally derived antibodies on performance and PCV-2 viremia in vaccinated piglets under field conditions

Background: Nowadays, the most common presentation of PCV-2 is the subclinical infection in piglets after weaning. The success of PCV-2 vaccination is associated with the control of the clinical disease as well as the improvement of production parameters. In consequence, the objective of the present study was to analyse the effect of PCV-2 maternally derived antibody (MDA) levels on vaccine efficacy in piglets vaccinated at three weeks of age with a commercial PCV-2 subunit vaccine. The study was performed analysing a database with 6112 wean-to-slaughter piglets from 4 different European regions. Results: Results showed that the use of the vaccine was able to decrease the PCV-2 viremia calculated as area under the curve (AUC = 60.29 ± 3.73), increase average daily weight gain (ADWG = 0.65 ± 0.01 kg/day) and reduce mortality (7%) in vaccinated piglets compared to non-vaccinated ones (AUC of 198.27 ± 6.14, 0.62 ± 0.01 kg/day and 11% respectively). The overall difference of ADWG between both groups was close to 30 g per day (p < 0.05), also when they were split for low and high levels of MDA titres. Moreover, the animals with the highest ADWG were observed in the group of piglets vaccinated with high or extremely high antibody titres (0.66 and 0.65 kg/day respectively). Considering only animals with extremely high antibody titres, both study groups performed similar, however there was a numerical difference of 10 g/day in favour of vaccinated piglets. Likewise, lack of correlation between ADWG and MDA was observed suggesting that no maternal antibody interference was present with the tested vaccine because the vaccinated animals grew faster compared to unvaccinated control animals, regardless of the level of maternal antibodies present at the time of vaccination. Conclusions: The results of the present study demonstrated that the MDA against PCV-2 transferred through the colostrum intake has a protective effect against this viral infection. The vaccine used in the present study (Ingelvac CircoFLEX®) was effective when applied at three weeks of age and was not affected by the level of MDA at the time of vaccination

Photon counting with photon number resolution through superconducting nanowires coupled to a multi-channel TDC in FPGA

The paper presents a system for measuring photon statistics and photon timing in the few-photon regime down to the single-photon level. The measurement system is based on superconducting nanowire single photon detectors and a time-to-digital converter implemented into a programmable device. The combination of these devices gives high performance to the system in terms of resolution and adaptability to the actual experimental conditions. As a case of application, we present the measurement of photon statistics for coherent light states. In this measurement, we make use of 8th order single photon correlations to reconstruct with high fidelity the statistics of a coherent state with average photon number up to 4. The processing is performed by means of a tapped-delay-line time-to-digital converter architecture that also hosts an asynchronous-correlated-digital-counter implemented in a field programmable gate array device and specifically designed for performance optimization in multi-channel usage

Identification and characterization of secreted and pathogenesis-related proteins in Ustilago maydis

Interactions between plants and fungal pathogens require a complex interplay at the plant–fungus interface. Extracellular effector proteins are thought to play a crucial role in establishing a successful infection. To identify pathogenesis-related proteins in Ustilago maydis we combined the isolation of secreted proteins using a signal sequence trap approach with bioinformatic analyses and the subsequent characterization of knock-out mutants. We identified 29 secreted proteins including hydrophobins and proteins with a repetitive structure similar to the repellent protein Rep1. Hum3, a protein containing both, a hydrophobin domain and a repetitive Rep1-like region, is shown to be processed during passage through the secretory pathway. While single knock-outs of hydrophobin or repellent-like genes did not affect pathogenicity, we found a strong effect of a double knock-out of hum3 and the repetitive rsp1. Yeast-like growth, mating, aerial hyphae formation and surface hydrophobicity were unaffected in this double mutant. However, pathogenic development in planta stops early after penetration leading to a complete loss of pathogenicity. This indicates that Hum3 and Rsp1 are pathogenicity proteins that share an essential function in early stages of the infection. Our results demonstrate that focusing on secreted proteins is a promising way to discover novel pathogenicity proteins that might be broadly applied to a variety of fungal pathogens

Effect of Austenite Deformation on the Microstructure Evolution and Grain Refinement Under Accelerated Cooling Conditions

Although there has been much research regarding the effect of austenite deformation on accelerated cooled microstructures in microalloyed steels, there is still a lack of accurate data on boundary densities and effective grain sizes. Previous results observed from optical micrographs are not accurate enough, because, for displacive transformation products, a substantial part of the boundaries have disorientation angles below 15 deg. Therefore, in this research, a niobium microalloyed steel was used and electron backscattering diffraction mappings were performed on all of the transformed microstructures to obtain accurate results on boundary densities and grain refinement. It was found that with strain rising from 0 to 0.5, a transition from bainitic ferrite to acicular ferrite occurs and the effective grain size reduces from 5.7 to 3.1 μm. When further increasing strain from 0.5 to 0.7, dynamic recrystallization was triggered and postdynamic softening occurred during the accelerated cooling, leading to an inhomogeneous and coarse transformed microstructure. In the entire strain range, the density changes of boundaries with different disorientation angles are distinct, due to different boundary formation mechanisms. Finally, the controversial influence of austenite deformation on effective grain size of low-temperature transformation products was argued to be related to the differences in transformation conditions and final microstructures