Influence of reaction time and synthesis temperature on the physical properties of ZnO nanoparticles synthesized by the hydrothermal method

Influence of synthesis temperature and reaction time on the structural and optical properties of ZnO nanoparticles synthesized by the hydrothermal method was investigated using X-ray diffraction (XRD), high resolution transmission electron microscopy (HR-TEM), energy-dispersive X-ray, Fourier transform infra-red spectroscopy, and UV–visible and fluorescence spectroscopy. The XRD pattern and HR-TEM images confirmed the presence of crystalline hexagonal wurtzite ZnO nanoparticles with average crystallite size in the range 30–40 nm. Their energy gap determined by fluorescence was found to depend on the synthesis temperature and reaction time with values in the range 2.90–3.78 eV. Thermal analysis, thermogravimetric and the differential scanning calorimetry were used to study the thermal reactions and weight loss with heat of the prepared ZnO nanoparticles

Influence of the sol gel synthesis parameters on the photoluminescence properties of ZnO nanoparticles

International audienceIn this work, ZnO NPs were successfully synthesized by the sol–gel method without any organic additives or post annealing. The effect of the preparation process on the structural and optical properties of the resulting NPs was investigated by means of X-ray diffraction (XRD), transmission electron microscopy (TEM) and photoluminescence (PL) spectroscopy. The structural characterization demonstrated clearly that the NPs crystallize in pure ZnO würtzite structure without any other secondary phases. Furthermore, we show that it is possible to perform the control of the crystalline growth orientation of ZnO NPs, which is a key parameter when seeking to develop ZnO NPs with piezoelectric properties for nano-transducer applications. In fact, TEM observations show that the reduction of the NaOH flow changes the NPs shape from hexagonal NPS to short nanorods grown along the c-axis. The PL spectra of the obtained NPs excited at 280 nm, present an UV emission centered at approximately 380 nm with a slight shift when varying the synthesis temperature and/or the NaOH flow. Moreover, as the visible region (from 400 to 650 nm) is concerned, it was shown that the increasing of the synthesis temperature affects strongly the kind of interstitial defects (Oi, Zni and VoZni) formed in ZnO nanostructures. However, the excitation at 320 nm revealed a broad deep-level emission for all the samples that can be deconvoluted into two Gaussian peaks centered at 514 nm (P1) and 581 nm (P2). These last results have been discussed in the light of a physical mechanism based on the Schottky barrier

Effect of Solvents and Stabilizer Molar Ratio on the Growth Orientation of Sol-Gel-Derived ZnO Thin Films

This work targets to control the growth orientation of sol-gel-derived ZnO thin films in order to allow different modes of excitation (longitudinal and transverse) when targeted to be used in piezoelectric applications. For that, the effect of solvents and stabilizer molar ratio on the structural and optical characteristics of the obtained films is investigated by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), and UV-Vis spectrophotometry. The XRD results show clearly that the synthesized films exhibit hexagonal wurtzite structure without any secondary phases and that the crystallite average size, estimated by the Scherrer formula, is ranged between 13 and 30 nm. The main finding of this work is to show that the control of the crystalline growth orientation is possible simply by varying the solvent nature and/or the stabilizer molar ratio. These later parameters are therefore considered as key factors when seeking to develop the ZnO-based transducers. Actually, the ZnO thin films synthesized with propanol as solvent are oriented only along the c-axis; meanwhile, when using the isopropanol or ethanol, other preferential orientations appear. Additionally, the effect of MEA molar ratio (r) has been studied on the propanol-derived films (the unfavorable case). It has been found that this parameter has a direct effect on the crystalline growth orientation of these films and that a new preferential orientation (100) appears at low r. On the other hand, SEM images show the formation of homogeneous nanocrystalline thin films with an average grain size ranged between 19 and 35 nm. Moreover, the ZnO thin films exhibit a high transparency in the visible region, and the measured transmittance is ranged from 85 to 97%. However, the change of ZnO film orientation has no significant effect on the direct bandgap energy which is closed to 3.30 eV

Morocco

Morocco has well developed irrigation facilities that range from small scale communal systems based on springs, qanats or river diversions to groundwater-based individual initiatives and large scale public schemes. Water demand policies – e.g. water pricing, shift to drip irrigation, 'aquifer contracts' and other forms of participatory management – have shown little potential in curbing overexploitation of resources in many basins. Expansion of irrigated areas and the priority given to productivity have taken their toll on the environment, favored commercial agriculture, and contributed to a net depletion of groundwater estimated at 1 billion m3/year. There is a need to better align agricultural development, water conservation, and environmental objectives. After a short historical perspective, this chapter first reviews a number of trends in the irrigation sector (modernization, development of groundwater resources, wastewater reuse and desalination), before turning to regulatory and institutional issues, including participatory management, economic tools, privatization and an examination of the Plan Maroc Vert. The threats posed by climate change, water scarcity, and environmental degradation are then discussed