Heavy metal bioavailability and bioaccessibility in soil

This chapter considers the use of a variety of approaches to assess either the bioavailability or the bioaccessibility of metals in soil. The bioavailability of metals from soils is considered with respect to a series of single-extraction methods, including the use of ethylenediaminetetraacetic acid (EDTA), acetic acid, diethylenetriaminepentaacetic acid (DTPA), ammonium nitrate, calcium chloride and sodium nitrate. Then, a procedure for the recovery of metals using a three-stage sequential extraction protocol is described. Two alternate approaches for assessing the environmental health risk to humans by undertaking in vitro gastrointestinal extraction (also known as the physiologically based extraction test, PBET) are considered. Finally, two acid digestion protocols that allow the pseudo-total metal content of samples to be assessed are provided. In all cases details of how the different approaches can be performed are provided, including the specific reagents required (and their preparation), details of the different extraction and acid digestion protocols to be followed and suitable analytical details to allow the measurement of metals by inductively coupled plasma mass spectrometry (ICP-MS) with/without a collision/reaction cell. A detailed Notes section provides experimental details to guide the reader through some of the practical aspects of the procedures. Finally, some experimental results are provided as evidence of the suitability of the approaches described including single-extraction data, using EDTA and acetic acid, for metals in CRM BCR 700. In addition, in vitro gastrointestinal extraction data are provided for metals in CRM SRM 1570A (spinach leaves). The influence of time on the intestinal fluid phase on the recovery of metals in CRM SRM 1570A (spinach leaves) and CRM INCT-TL-1 (tea leaves) is investigated, as well as the repeatability in terms of recovery of metals from soil over a 3-week period by in vitro gastrointestinal extraction

Certification of butyltins and phenyltins in marine sediment certified reference material by species-specific isotope-dilution mass spectrometric analysis using synthesized (118)Sn-enriched organotin compounds

A new marine sediment certified reference material, NMIJ CRM 7306-a, for butyltin and phenyltin analysis has been prepared and certified by the National Metrological Institute of Japan at the National Institute of Advanced Industrial Science and Technology (NMIJ/AIST). Candidate sediment material was collected at a bay near industrial activity in Japan. After air-drying, sieving, and mixing the material was sterilized with γ-ray irradiation. The material was re-mixed and packaged into 250 glass bottles (15 g each) and these were stored in a freezer at −30 °C. Certification was performed by use of three different types of species-specific isotope-dilution mass spectrometry (SSID–MS)—SSID–GC–ICP–MS, SSID–GC–MS, and SSID–LC–ICP–MS, with (118)Sn-enriched organotin compounds synthesized from (118)Sn-enriched metal used as a spike. The (118)Sn-enriched mono-butyltin (MBT), dibutyltin (DBT), and tributyltin (TBT) were synthesized as a mixture whereas the (118)Sn-enriched di-phenyltin (DPhT) and triphenyltin (TPhT) were synthesized individually. Four different extraction methods, mechanical shaking, ultrasonic, microwave-assisted, and pressurized liquid extraction, were adopted to avoid possible analytical bias caused by non-quantitative extraction and degradation or inter-conversion of analytes in sample preparations. Tropolone was used as chelating agent in all the extraction methods. Certified values are given for TBT 44±3 μg kg(−1) as Sn, DBT 51 ± 2 μg kg(−1) as Sn, MBT 67 ± 3 μg kg(−1) as Sn, TPhT 6.9 ± 1.2 μg kg(−1) as Sn, and DPhT 3.4 ± 1.2 μg kg(−1) as Sn. These levels are lower than in other sediment CRMs currently available for analysis of organotin compounds

Organotin stability during storage of marine waters and sediments

cited By 75International audienceThe stability of organotin compounds in water and sediment samples during storage and pre-treatment is of paramount importance. This study presents experiments with butyltin compounds showing that the storage of filtered natural seawater in the dark at pH 2 in pyrex glass bottles is suitable to preserve the stability of tributyltin (TBT) over 4 months both at 20-25°C and 4°C. The other butyltin compounds (mono- and dibutyltin) are stable at 4°C but display some losses at 25°C. A poor recovery of butyltins in turbid water hampered the assessment of the stability on a quantitative basis: however, it could be demonstrated on a qualitative basis that the butyltin stability is uneasily achieved in water samples with high suspended matter. Finally, wet storage and freezing are found to be suitable to preserve the tributyltin stability in sediments, as well as ovendrying (at 50°C), freeze-drying and air-drying. Mono- and dibutyltin are generally subject to changes during the storage of sediments using the different methods. © 1991 Springer-Verlag

Ensuring quality in long term environmental monitoring for chemical speciation

cited By 13International audienceThe awareness regarding quality assurance (QA) and quality control (QC) for environmental monitoring has considerably increased in the past few years, especially with respect to the determination of chemical species, since errors occurring at various levels may considerably affect the interpretation of results (e.g. studies of toxic impact, geochemical pathways, etc.). QA for environmental analysis covers a broad range of activities from sample collection to laboratory work and the approach for ensuring quality data should be considered in a global context. However, whereas great emphasis has been placed on QA within the laboratory, there have been few systematic attempts to evaluate risks of discrepancies related, for example, to field manipulations. The situation is even worse when monitoring is applied to relatively new fields such as chemical speciation. This paper outlines some of the main aspects of quality control of environmental analysis, including the validation of methods, sampling and sample handling, storage, etc., with special emphasis on the monitoring of chemical forms of elements (e.g. species of tin, mercury, lead and selenium)

Variability of butyltin determination in water and sediment samples from european coastal environments

cited By 10International audienceA large amount of data has appeared in the literature within the last few years dealing with the monitoring of butyltin compounds in coastal environments. However, the strategies used strongly differed from one author to another, which led to difficulties in the comparison of contamination levels and the evaluation of long‐term trends. In this paper, different causes of pitfalls due to uncontrolled sources of variability are addressed; they involve precautions to be undertaken for the monitoring of butylins in water and sediment, particularly: sample collection; sample pretreatment (filtration/centrifugation, acidification, sieving); sample storage (different methods for storage and drying procedures); variability over the same site; variations over a tidal cycle; and variability due to diffusion (e.g. due to flushing). Copyright © 1990 John Wiley & Sons Ltd

Tin and organotin speciation during wastewater and sludge treatment processes

cited By 52International audienceThe speciation of inorganic tin and organotin compounds is studied in raw water samples and in filtered water samples collected along the main steps of the wastewater treatment plant of Bordeaux City (France). Analyses are performed by hydride generation, cryogenic trapping, chromatographic separation and detection by atomic absorption spectrometry. Results show that dissolved inorganic, methylated tin (mono-, di-, trialkylated forms) and butyltin compounds (mono- and dialkylated forms) occur at all stages of the water treatment process. Butyltins were found at low concentration levels which tends to show that the weathering of PVC is a minor phenomenon. High methyltin contents were however found which illustrate the high methylation rate in sewage water; a general removal trend from the water is observed for inorganic and methyl-tin species both in raw water and filtered water samples. Volatilization of tin compounds is observed in the anaerobic fermentation steps of the activated sludge. Possible pathways for transformation of tin (methylation, volatilization) during the wastewater treatment are discussed. © 1993

Butyltin distribution in a sediment core from Arcachon harbour (France)

cited By 41International audienceThe concentrations of butyltin compounds in water, intertidal sediments and in a sediment core have been measured in the harbour of Arcachon (France) in order to assess the effectiveness of government legislative actions on the use of tributylin (TBT) in marine antifouling paints. The results revealed the occurrence of an increasing TBT gradient from the bottom to the top of the core with a maximum at 15 cm depth, and a slight decrease within the upper 15 cm. It is shown that the TBT levels are still very high in this area and that this compound is not rapidly degraded in sediment as was previously assumed. This leads to the conclusion that even if the regulations have been respected, contamination from resuspended sediments is still likely. © 1994