12,931 research outputs found
Study on utilization of carboxyl group decorated carbon nanotubes and carbonation reaction for improving strengths and microstructures of cement paste
Carbon nanotubes (CNTs) have excellent mechanical properties and can be used to reinforce cement-based materials. On the other hand, the reaction product of carbonation with hydroxides in hydrated cement paste can reduce the porosity of cement-based materials. In this study, a novel method to improve the strength of cement paste was developed through a synergy of carbon nanotubes decorated with carboxyl group and carbonation reactions. The experimental results showed that the carboxyl group (–COOH) of decorated carbon nanotubes and the surfactant can control the morphology of the calcium carbonate crystal of carbonation products in hydrated cement paste. The spindle-like calcium carbonate crystals showed great morphological differences from those observed in the conventional carbonation of cement paste. The spindle-like calcium carbonate crystals can serve as fiber-like reinforcements to reinforce the cement paste. By the synergy of the
carbon nanotubes and carbonation reactions, the compressive and flexural strengths of cement paste were significantly improved and increased by 14% and 55%, respectively, when compared to those of plain cement paste
Improved lattice QCD with quarks: the 2 dimensional case
QCD in two dimensions is investigated using the improved fermionic lattice
Hamiltonian proposed by Luo, Chen, Xu, and Jiang. We show that the improved
theory leads to a significant reduction of the finite lattice spacing errors.
The quark condensate and the mass of lightest quark and anti-quark bound state
in the strong coupling phase (different from t'Hooft phase) are computed. We
find agreement between our results and the analytical ones in the continuum.Comment: LaTeX file (including text + 10 figures
Combined fit to BaBar and Belle data on e+e- to pi+pi- psi(2S)
A combined fit is performed to the BaBar and Belle measurements of the e+e-
to pi+pi-psi(2S) cross sections for center-of-mass energy between threshold and
5.5 GeV. The resonant parameters of the Y(4360) and Y(4660) are determined. The
mass is 4355^{+9}_{-10}\pm 9 MeV/c^2 and the width is 103^{+17}_{-15}\pm 11
MeV/c^2 for the Y(4360), and the mass is 4661^{+9}_{-8}\pm 6 MeV/c^2 and the
width is 42^{+17}_{-12}\pm 6 MeV/c^2 for the Y(4660). The production of the
Y(4260) in pi+pi-psi(2S) mode is found to be at 2\sigma level, and B(Y(4260) to
pi+pi-psi(2S))\Gamma_{e+e-} is found to be less than 4.3 eV/c^2 at the 90%
confidence level, or equal to 7.4^{+2.1}_{-1.7} eV/c^2 depending on it
interferes with the Y(4360) constructively or destructively. These information
will shed light on the understanding of the nature of the Y states observed in
initial state radiation processes.Comment: 8 pages, 4 figure
Two-dimensional structures of ferroelectric domain inversion in LiNbO3 by direct electron beam lithography
We report on the fabrication of domain-reversed structures in LiNbO3 by means
of direct electron beam lithography at room temperature without any static
bias. The LiNbO3 crystals were chemically etched after the exposure of electron
beam and then, the patterns of domain inversion were characterized by atomic
force microscopy (AFM). In our experiment, an interesting phenomenon occurred
when the electron beam wrote a one-dimensional (1-D) grating on the negative
c-face: a two-dimensional (2-D) dotted array was observed on the positive c-
face, which is significant for its potential to produce 2-D and
three-dimensional photonic crystals. Furthermore, we also obtained 2-D
ferroelectric domain inversion in the whole LiNbO3 crystal by writing the 2-D
square pattern on the negative c-face. Such a structure may be utilized to
fabricate 2-D nonlinear photonic crystal. AFM demonstrates that a 2-D
domain-reversed structure has been achieved not only on the negative c-face of
the crystal, but also across the whole thickness of the crystal.Comment: 17 pages, 4 figure
- …