Characteristics of homogeneous multi-core fibers for SDM transmission

We describe optical data transmission systems using homogeneous, single-mode, multi-core fibers (MCFs). We first briefly discuss space-division multiplexing (SDM) fibers, observing that no individual SDM fiber offers overwhelming advantages over bundles of single-mode fiber (SMF) across all transmission regimes. We note that for early adoption of SDM fibers, uncoupled or weakly coupled fibers which are compatible with existing SDM infrastructure have a practical advantage. Yet, to be more attractive than parallel SMF, it is also necessary to demonstrate benefits beyond improved spatial spectral efficiency. It is hoped that the lower spread of propagation delays (skew) between spatial channels in some fibers can be exploited for improved performance and greater efficiency from hardware sharing and joint processing. However, whether these benefits can be practically harnessed and outweigh impairments or effort to mitigate cross talk between spatial channels is not yet clear. Hence, focusing on homogeneous MCFs, we first describe measurements and simulations on the impact of inter-core cross talk in such fibers before reporting experimental investigation into the spatial channel skew variation with a series of the experimental results including a comparison with SMF in varying environmental conditions. Finally, we present some system and transmission experiments using parallel recirculating loops that enable demonstration of both multi-dimensional modulation and joint digital processing techniques across three MCF cores. Both techniques lead to increased transmission reach but highlight the need for further experimental analysis to properly characterize the potential benefits of correlated propagation delays in such fibers

Performance of adaptive DD-OFDM multicore fiber links and its relation with intercore crosstalk

Adaptive direct-detection (DD) orthogonal frequency-division multiplexing (OFDM) is proposed to guarantee signal quality over time in weakly-coupled homogenous multicore fiber (MCFs) links impaired by stochastic intercore crosstalk (ICXT). For the first time, the received electrical power of the ICXT and the performance of the adaptive DD-OFDM MCF link are experimentally monitored quasi-simultaneously over a 210 hour period. Experimental results show that the time evolution of the error vector magnitude due to the ICXT can be suitably estimated from the normalized power of the detected crosstalk. The detected crosstalk results from the beating between the carrier in the test core and ICXT originating from the carrier and modulated signal from interfering core. The results show that the operation of DD-OFDM systems employing fixed modulation can be severely impaired by the presence of ICXT that may unpredictable vary in both power and frequency. The system may suffer from deleterious impact of moderate ICXT levels over a time duration of several hours or from peak ICXT levels occurring over a number of minutes. Such power fluctuations can lead to large variations in bit error ratio (BER) for static modulation schemes. Here, we show that BER fluctuations may be minimized by the use of adaptive modulation techniques and that in particular, the adaptive OFDM is a viable solution to guarantee link quality in MCF-based systems. An experimental model of an adaptive DD-OFDM MCF link shows an average throughput of 12 Gb/s that represents a reduction of only 9% compared to the maximum throughput measured without ICXT and an improvement of 23% relative to throughput obtained with static modulation.info:eu-repo/semantics/publishedVersio

Single parity check-coded 16QAM over spatial superchannels in multicore fiber transmission

We experimentally investigate single-parity check (SPC) coded spatial superchannels based on polarization-multiplexed 16-ary quadrature amplitude modulation (PM-16QAM) for multicore fiber transmission systems, using a 7-core fiber. We investigate SPC over 1, 2, 4, 5 or 7 cores in a back-to-back configuration and compare the sensitivity to uncoded PM-16QAM, showing that at symbol rates of 20 Gbaud and at a bit-error-rate (BER) of 10(-3), the SPC superchannels exhibit sensitivity improvements of 2.7 dB, 2.0 dB, 1.7 dB, 1.3 dB, and 1.1 dB, respectively. We perform both single channel and wavelength division multiplexed (WDM) transmission experiments with 22 GHz channel spacing and 20 Gbaud channel symbol rate for SPC over 1, 3 and 7 cores and compare the results to PM-16QAM with the same spacing and symbol rate. We show that in WDM signals, SPC over hl1 core can achieve more than double the transmission distance compared to PM-16QAM at the cost of 0.91 bit/s/Hz/core in spectral efficiency (SE). When sharing the parity-bit over 7 cores, the loss in SE becomes only 0.13 bit/s/Hz/core while the increase in transmission reach over PM-16QAM is 44 %. (C) 2015 Optical Society of Americ

Intercore crosstalk in direct-detection homogeneous multicore fiber systems impaired by laser phase noise

The impact of the laser phase noise on the photodetected intercore crosstalk and performance of direct-detection orthogonal frequency division multiplexing multicore fiber systems is experimentally investigated. A new solution to overcome the performance fluctuations over time induced by the combined effect of laser phaser noise and intercore crosstalk is proposed. The solution uses adaptive modulation with extended time memory to estimate the bit loading scheme of each subcarrier from the mean and maximum error vector magnitude evaluated over the last ten blocks of transmitted training symbols. During measurements of up to 90 hours, intercore crosstalk power variation induced by fast laser phase noise variations exceeded 20 dB in both time and frequency, and error vector magnitude fluctuations of 4 dB were observed on a sub-second timescale. It is shown that direct-detection orthogonal frequency division multiplexing multicore fiber based systems employing a typical adaptive modulation solution, in which the bit loading scheme is evaluated from a single set of training symbols, suffer from unacceptable outage probabilities and are unable to counteract the fast power variations of intercore crosstalk and phase noise induced impairments. By extending the system memory used to estimate the bit loading scheme employed by the adaptive technique, an outage probability reduction by one order of magnitude is achieved. This reduction is attained by using the mean of the error vector magnitude evaluated over the last ten blocks of training symbols to estimate the bit loading scheme of subcarriers. Further reduction of the outage probability by four orders of magnitude is also demonstrated using a more conservative approach to estimate the bit loading scheme of the subcarriers. However, this conservative approach, based on the maximum error vector magnitude, may lead to additional loss of the average throughput.info:eu-repo/semantics/publishedVersio

Roadmap on multimode photonics

Multimode devices and components have attracted considerable attention in the last years, and different research topics and themes have emerged very recently. The multimodality can be seen as an additional degree of freedom in designing devices, thus allowing for the development of more complex and sophisticated components. The propagation of different modes can be used to increase the fiber optic capacity, but also to introduce novel intermodal interactions, as well as allowing for complex manipulation of optical modes for a variety of applications. In this roadmap we would like to give to the readers a comprehensive overview of the most recent developments in the field, presenting contributions coming from different research topics, including optical fiber technologies, integrated optics, basic physics and telecommunications

Improved functionalization of oleic acid-coated iron oxide nanoparticles for biomedical applications

Superparamagnetic iron oxide nanoparticles can providemultiple benefits for biomedical applications in aqueous environments such asmagnetic separation or magnetic resonance imaging. To increase the colloidal stability and allow subsequent reactions, the introduction of hydrophilic functional groups onto the particles’ surface is essential. During this process, the original coating is exchanged by preferably covalently bonded ligands such as trialkoxysilanes. The duration of the silane exchange reaction, which commonly takes more than 24 h, is an important drawback for this approach. In this paper, we present a novel method, which introduces ultrasonication as an energy source to dramatically accelerate this process, resulting in high-quality waterdispersible nanoparticles around 10 nmin size. To prove the generic character, different functional groups were introduced on the surface including polyethylene glycol chains, carboxylic acid, amine, and thiol groups. Their colloidal stability in various aqueous buffer solutions as well as human plasma and serum was investigated to allow implementation in biomedical and sensing applications.status: publishe

In Vivo Methods for the Assessment of Topical Drug Bioavailability

This paper reviews some current methods for the in vivo assessment of local cutaneous bioavailability in humans after topical drug application. After an introduction discussing the importance of local drug bioavailability assessment and the limitations of model-based predictions, the focus turns to the relevance of experimental studies. The available techniques are then reviewed in detail, with particular emphasis on the tape stripping and microdialysis methodologies. Other less developed techniques, including the skin biopsy, suction blister, follicle removal and confocal Raman spectroscopy techniques are also described