78 research outputs found
Solar chargers based on new dye-based photovoltaic modules and new supercapacitors
Electricity storage is one of the best-known methods of balancing the energy supply and demand at a given moment. The article presents an innovative solution for the construction of an electric energy storage device obtained from an innovative photovoltaic panel made of new dye-based photovoltaic modules and newly developed supercapacitors – which can be used as an emergency power source. In the paper, for the first time, we focused on the successful paring of new dye-sensitized solar cell (DSSC) with novel supercapacitors. In the first step, a microprocessor stand was constructed using Artificial Intelligence algorithms to control the parameters of the environment, as well as the solar charger composed of six DSSC cells with the dimensions of 100_100 mm and 126 CR2032 coin cells with a total capacitance of 60 F containing redox-active aqueous electrolyte. It was proven that the solar charger store enough energy to power, i.e. SOS transmitter or igniters, using a 5 V signal
Mutual dependence of radial and axial stiffness of hydrostatic combined journal and thrust bearing
Przedstawiono zależność sztywności zintegrowanego hydrostatycznego łożyska poprzeczno-wzdłużnego od jego parametrów geometrycznych i hydraulicznych. Poddano analizie sztywność w kierunku promieniowym i osiowym w przypadku, gdy czop nie obraca się. Szczególną uwagę zwrócono na wpływ wskaźników ciśnień w komorach łożyska nieobciążonego na sztywność w obu wspomnianych kierunkach. Zależności te opisano odpowiednimi wzorami i pokazano na wykresach. Wykazano wzajemne związki sztywności w obu kierunkach. Przedstawiono możliwość optymalizacji wskaźników ciśnień komorowych z punktu widzenia sztywności łożyska.In the paper the characteristics of the stiffness of the hydrostatic combined journal and thrust bearing in relation to its geometrical and hydraulic parameters is presented. Radial and axial stiffness of the bearing with non-rotating shaft was taken into account. Influence of the pressure ratios in non-loaded bearing on stiffness in both directions was particularly concerned. The derived characteristics were described by means of mathematical formulas and graphical diagrams. Mutual dependencies of stiffness in both directions were examined. Optimization capabilities of pressure ratios in respect of bearing stiffness is also presented
Influence of regulator on financial factors of the electricity distribution system operators
Energia elektryczna jest produktem przeznaczonym na sprzedaż. Ma jednak specyficzne
znaczenie, które skutkuje nadaniem jej przymiotu dobra publicznego. Przyczyną takiego stanu jest
konieczność zagwarantowania ciągłości jej dostaw. Niezbędna jest nie tylko dla prawidłowego
funkcjonowania gospodarstw domowych, lecz w szczególności konieczna dla zapewnienia bezpieczeństwa
kraju. W obowiązującym systemie gospodarczym, posługując się terminem konstytucyjnym:
społeczną gospodarką rynkową, to konkurencja, uważana jest za najlepszą metodę kształtowania
rynku i występujących w jego ramach stosunków. Niewątpliwie nie we wszystkich podsektorach
energetyki niewidzialna ręka rynku pozwala na realizację swoich celów i funkcji w sposób
wystarczający. Zatem niezbędne staje się wprowadzenie odpowiednich, aktywnych mechanizmów
regulacji stanowiących skuteczny substytut dla konkurencji. Regulatorowi – czyli prezesowi Urzę-
du Regulacji Energetyki przypisano szereg zadań i kompetencji. Ma on obowiązek dbania o interes
państwa w zakresie rozwoju przedsiębiorstw energetycznych. Równocześnie wykonuje on zadanie
ochrony odbiorcy końcowego przed nakładaniem nieuzasadnionych opłat za dostarczaną energię.
Jednakże regulator nie może być rzecznikiem wyselekcjonowanej grupy uczestników rynku. Jego
funkcją jest zastępowanie mechanizmów konkurencji rynkowej przy wykorzystaniu dostępnych
narzędzi prawnych i ekonomicznych. Rolę regulatora należy określić, jako zamiennika rynku
konkurencyjnego. Połączenie wskazanych powyżej zadań jest trudne, ale możliwe, przy zachowaniu
niezależności regulatora oraz nadaniu i zagwarantowaniu mu uprawnień umożliwiających, m.in. kontrolę nad gospodarką finansową spółek jednoosobowych Skarbu Państwa lub podmiotów
państwowych działających w branży dystrybucji energetycznej. Niniejszy tekst ma na celu przedstawienie
zależności między rozmaitymi formami aktywności organów regulacyjnych a podmiotami
uczestniczącymi w rynku energii, w szczególności spółek zajmujących się dystrybucją energii
elektrycznej. Autorzy wskazują, czym jest sama regulacja oraz kto wprowadza normy wiążące
strony. Ponadto podejmują staranie przedstawienia czytelnikowi w przystępny sposób zagadnienia
przychodu regulowanego oraz uwypuklenia w nim roli regulacji jakościowej. Istotą artykułu jest
wykazanie formy i stopnia oddziaływania Regulatora na wyniki finansowe OSD.Electrical energy is a product intended for sale. However, it has a specific meaning that results in its
importance for the public. The reason for this is the necessity of providinf the continuity of energy supply,
which is crucial not only for the proper functioning of households, but in particular to ensure the safety
of the country. In the current economical system – basing on the constitutional notion: the social market
economy – competition is considered the best method to shape the market and relations existing within it.
There is no doubt that there are sub-sectors of energy business where the „invisible hand of the market” do not allows to achieve its objectives and functions sufficiently. Therefore, it becomes necessary to introduce
some active regulation mechanisms which could be effective substitutes for the competition. Regulator –
the President of the Energy Regulatory Office – had been attributed with a number of tasks and competences.
He is obliged to take care of the interest of the state in terms of energy entities which are owned by the
State Treasury. At the same time he has to protect the final recipient of electricity from imposiong unreasonable
charges for delivered product. However, the regulator cannot stand for a selected group of market
participants. His function is to replace the mechanisms of market competition by using available legal and
economic tools. The role of the regulator should be defined as a substitute for a competitive market. The
combination of the abovemenioned tasks is difficult, but possible, while maintaining the independence of
the regulator and granting and guaranteeing its powers allowing i.e. control of the financial management
of entities solely owned by the State Treasury or public entities operating in the distribution of electricity.
This article aims to show the relationship between different forms of activity of regulatory bodies and the
entities involved in the energy market, in particular companies engaged in the distribution of energy. The
authors point out what is regulation and who introduces the standards which bind the parties. In addition,
they endeavor to present the issue of regulated revenue to the reader, and to emphasize the role of quality
regulation. The essence of the article is to demonstrate the form and extent of Regulator influence on DSO
financial results
Information system applied in the process of Management in sugar-beet production
Opracowany system informatyczny umożliwia analizę wielu wariantów procesu produkcji buraka cukrowego i wybór najwłaściwszej technologii według kryterium dostępności środków produkcji i ponoszonych kosztów. System pozwala więc na zmniejszenie ryzyka podejmowanych decyzji i wzrost efektywności uprawy buraka. System informatyczny składa się z trzy części: bazy danych, interfejsu użytkownika i modułów obliczeniowych. System zarządzania bazą danych napisano w języku SQL. Narzędziem programistycznym w pozostałych dwóch częściach aplikacji jest wizualne środowisko Borland C++ Builder w wersji 6.0. Model produkcji buraka cukrowego powstał w języku UML.Formulated model and computer application leaning on this create the possibility of analysis of many variants of sugar-beet production process and make possible the choice of the most proper one from the point of view of the production means accessibility and carried costs. Consequently the system allows to decrease the risk of undertaken decisions and an increase of the efficiency of the sugar-beet tillage. The entire informatic system has been divided into 3 parts: database, user interface and computational modules analyzing the accepted factors. SQL answers for the efficient function of the database. Visual environment Borland C++ Builder in 6.0 version is accountable for the two remaining parts. The model of sugar-beet production was designed in UML language
- …