Space Shuttle: Static pressure distribution on Chrysler Corporation Space Division SERV booster configuration

A dual purpose test was conducted in the propulsion wind tunnel (PWT) to evaluate the performance of an aerospike engine, in the presence of a booster, and obtain forebody and base pressure distributions on the booster in which it is installed. The test item was a 2.5 percent scaled replica of the SERV booster employing a 5 percent spike length aerospike engine installed in the base region of the model. Cold flow air was used to simulate engine jet operation. Two booster configurations were investigated, one on which reentry aerospike engine thermal protection doors were installed, and another where the doors were removed. The data presented are representative of the latter configuration for a Mach number range of 0 to 1.25 at angles of attack of 0 and 8 degrees and 0 degrees angle of sideslip

IMPLICATIONS OF RAISING THE NONFAT SOLIDS STANDARDS FOR BEVERAGE MILK

An econometric model of the dairy industry was used to estimate the effects on farmers, consumers, and taxpayers of nationwide adoption of the California nonfat solids standards for fluid milk. It was estimated that adoption of the California standards would raise farm-level milk prices by 1 to 5 percent in the short run and by 1 to 2 percent in the long run. The average retail price of fluid milk would rise by 9 to 13 cents per gallon. Dairy program costs fall under most scenarios, but could rise if surpluses fall to levels that would trigger increases in the support price.Agricultural and Food Policy,

Reflections On Contributing To “Big Discoveries” About The Fly Clock: Our Fortunate Paths As Post-Docs With 2017 Nobel Laureates Jeff Hall, Michael Rosbash, And Mike Young

In the early 1980s Jeff Hall and Michael Rosbash at Brandeis University and Mike Young at Rockefeller University set out to isolate the period (per) gene, which was recovered in a revolutionary genetic screen by Ron Konopka and Seymour Benzer for mutants that altered circadian behavioral rhythms. Over the next 15 years the Hall, Rosbash and Young labs made a series of groundbreaking discoveries that defined the molecular timekeeping mechanism and formed the basis for them being awarded the 2017 Nobel Prize in Physiology or Medicine. Here the authors recount their experiences as post-docs in the Hall, Rosbash and Young labs from the mid-1980s to the mid-1990s, and provide a perspective of how basic research conducted on a simple model system during that era profoundly influenced the direction of the clocks field and established novel approaches that are now standard operating procedure for studying complex behavior

Design considerations for a LORAN-C timing receiver in a hostile signal to noise environment

The environment in which a LORAN-C Timing Receiver may function effectively depends to a large extent on the techniques utilized to insure that interfering signals within the pass band of the unit are neutralized. The baseline performance manually operated timing receivers is discussed and the basic design considerations and necessary parameters for an automatic unit utilizing today's technology are established. Actual performance data is presented comparing the results obtained from a present generation timing receiver against a new generation microprocessor controlled automatic acquisition receiver. The achievements possible in a wide range of signal to noise situations are demonstrated

Data distribution satellite

A description is given of a data distribution satellite (DDS) system. The DDS would operate in conjunction with the tracking and data relay satellite system to give ground-based users real time, two-way access to instruments in space and space-gathered data. The scope of work includes the following: (1) user requirements are derived; (2) communication scenarios are synthesized; (3) system design constraints and projected technology availability are identified; (4) DDS communications payload configuration is derived, and the satellite is designed; (5) requirements for earth terminals and network control are given; (6) system costs are estimated, both life cycle costs and user fees; and (7) technology developments are recommended, and a technology development plan is given. The most important results obtained are as follows: (1) a satellite designed for launch in 2007 is feasible and has 10 Gb/s capacity, 5.5 kW power, and 2000 kg mass; (2) DDS features include on-board baseband switching, use of Ku- and Ka-bands, multiple optical intersatellite links; and (3) system user costs are competitive with projected terrestrial communication costs

Observation of the March Maximum in the Daemon Flux from Neos in the Year 2005: New Efforts and New Effects

The experiments of 2005 aimed at detection of low-velocity (~10-15 km s-1) daemons falling on to the Earth's surface from Near-Earth, Almost Circular Heliocentric Orbits (NEACHOs) have corroborated once more the existence of the March maximum in their flux by raising its confidence level to 99.99%. In addition, these experiments permitted us to identify several FEU-167-1-type PM tubes, with a few times thicker inner Al coating, which appear to be capable to detect, without any scintillator, the crossing of negatively charged daemons. As a result, detection efficiency increases tens of times, thus raising the measured level of the March daemon flux to f > 0.5E-7 cm-2s-1.Comment: 14 page

The cost of systemic corticosteroid-induced morbidity in severe asthma : a health economic analysis

The study data-set was supported by the Respiratory Effectiveness Group through their academic partnership with Optimum Patient Care. Ciaran O'Neill was funded under a HRB Research Leader Award (RL/13/16).Peer reviewedPublisher PD

A smoothing algorithm using cubic spline functions

Two algorithms are presented for smoothing arbitrary sets of data. They are the explicit variable algorithm and the parametric variable algorithm. The former would be used where large gradients are not encountered because of the smaller amount of calculation required. The latter would be used if the data being smoothed were double valued or experienced large gradients. Both algorithms use a least-squares technique to obtain a cubic spline fit to the data. The advantage of the spline fit is that the first and second derivatives are continuous. This method is best used in an interactive graphics environment so that the junction values for the spline curve can be manipulated to improve the fit