Biosurfactant from Lactococcus lactis 53 inhibits microbial adhesion on silicone rubber

The ability of biosurfactant obtained from the probiotic bacterium Lactococcus lactis 53 to inhibit adhesion of four bacterial and two yeast strains isolated from explanted voice prostheses to silicone rubber with and without an adsorbed biosurfactant layer was investigated in a parallel-plate flow chamber. The microbial cell surfaces and the silicone rubber with and without an adsorbed biosurfactant layer were characterized using contact-angle measurements. Water contact angles indicated that the silicone-rubber surface with adsorbed biosurfactant was more hydrophilic (48°) than bare silicone rubber (109°). The results showed that the biosurfactant was effective in decreasing the initial deposition rates of Staphylococcus epidermidis GB 9/6 from 2,100 to 220 microorganisms cm−2 s−1, Streptococcus salivarius GB 24/9 from 1,560 to 137 microorganisms cm−2 s−1, and Staphylococcus aureus GB 2/1 from 1,255 to 135 microorganisms cm−2 s−1, allowing for a 90% reduction of the deposition rates. The deposition rates of Rothia dentocariosa GBJ 52/2B, Candida albicans GBJ 13/4A, and Candida tropicalis GB 9/9 were far less reduced in the presence of the biosurfactant as compared with the other strains. This study constitutes a step ahead in developing strategies to prevent microbial colonization of silicone-rubber voice prostheses

다양한 교정용 브라켓 원재료에 부착하는 mutans streptococci 양의 비교분석

Objective: To estimate the effects of bracket material type on enamel decalcification during orthodontic treatment, this study analyzed the adhesion level of mutans streptococci (MS) to orthodontic bracket materials in vivo. Methods: Three different types of orthodontic bracket materials were used: stainless steel, monocrystalline sapphire, and polycrystalline alumina. A balanced complete block design was used to exclude the effect of positional variation of bracket materials in the oral cavity. Three types of plastic individual trays were made and one subject placed the tray in the mouth for 12 hours. Then, the attached bacteria were isolated and incubated on a mitis salivadus media containing bacitracin for 48 hours. Finally, the number of colony forming units of MS was counted. The experiments were independently performed 5 times with each of the 3 trays, resulting in a total of 15 times. Mixed model ANOVA was used to compare the adhesion amount of MS. Results: There was no difference in colony forming units among the bracket materials irrespective of jaw and tooth position. Conclusions: This study suggested that the result of quantitative analysis of MS adhesion to various orthodontic bracket materials in vivo may differ from that of the condition in vitro. (Korean J Orthod 2009;39(2):105-111)

Beyond crime statistics: the construction and application of a criminogenity monitor in Amsterdam

Criminologists have devoted a great deal of attention to risk factors - also called criminogenic factors - leading to criminal offending. This paper presents a criminogenity monitor which includes 19 risk factors that underlie crime. These factors do not themselves cause criminal behaviour; rather, they must be seen as signals that crimes may be committed. After discussing how the criminogenity monitor was constructed, we apply the risk factors we examined to the situation in Amsterdam, capital city of the Netherlands. The monitor is intended to function particularly as an instrument to rationalise policy-makers' work in targeting and preventing symptoms of crime at three geographical levels: the entire city, its boroughs and its neighbourhoods. © 2012 The Author(s)

Atomic force microscopy studies of bioprocess engineering surfaces - imaging, interactions and mechanical properties mediating bacterial adhesion

The detrimental effect of bacterial biofilms on process engineering surfaces is well documented. Thus, interest in the early stages of bacterial biofilm formation; in particular bacterial adhesion and the production of anti-fouling coatings has grown exponentially as a field. During this time, Atomic force microscopy (AFM) has become an essential tool for the evaluation of bacterial adhesion. Due to its versatility AFM offers not only insight into the topographical landscape and mechanical properties of the engineering surfaces, but elucidates, through direct quantification the topographical and biomechnical properties of the foulants The aim of this paper is to collate the current research on bacterial adhesion, both theoretical and practical, and outline how AFM as a technique is uniquely equipped to provide further insight into the nanoscale world at the bioprocess engineering surface

Case Reports1. A Late Presentation of Loeys-Dietz Syndrome: Beware of TGFβ Receptor Mutations in Benign Joint Hypermobility

Background: Thoracic aortic aneurysms (TAA) and dissections are not uncommon causes of sudden death in young adults. Loeys-Dietz syndrome (LDS) is a rare, recently described, autosomal dominant, connective tissue disease characterized by aggressive arterial aneurysms, resulting from mutations in the transforming growth factor beta (TGFβ) receptor genes TGFBR1 and TGFBR2. Mean age at death is 26.1 years, most often due to aortic dissection. We report an unusually late presentation of LDS, diagnosed following elective surgery in a female with a long history of joint hypermobility. Methods: A 51-year-old Caucasian lady complained of chest pain and headache following a dural leak from spinal anaesthesia for an elective ankle arthroscopy. CT scan and echocardiography demonstrated a dilated aortic root and significant aortic regurgitation. MRA demonstrated aortic tortuosity, an infrarenal aortic aneurysm and aneurysms in the left renal and right internal mammary arteries. She underwent aortic root repair and aortic valve replacement. She had a background of long-standing joint pains secondary to hypermobility, easy bruising, unusual fracture susceptibility and mild bronchiectasis. She had one healthy child age 32, after which she suffered a uterine prolapse. Examination revealed mild Marfanoid features. Uvula, skin and ophthalmological examination was normal. Results: Fibrillin-1 testing for Marfan syndrome (MFS) was negative. Detection of a c.1270G > C (p.Gly424Arg) TGFBR2 mutation confirmed the diagnosis of LDS. Losartan was started for vascular protection. Conclusions: LDS is a severe inherited vasculopathy that usually presents in childhood. It is characterized by aortic root dilatation and ascending aneurysms. There is a higher risk of aortic dissection compared with MFS. Clinical features overlap with MFS and Ehlers Danlos syndrome Type IV, but differentiating dysmorphogenic features include ocular hypertelorism, bifid uvula and cleft palate. Echocardiography and MRA or CT scanning from head to pelvis is recommended to establish the extent of vascular involvement. Management involves early surgical intervention, including early valve-sparing aortic root replacement, genetic counselling and close monitoring in pregnancy. Despite being caused by loss of function mutations in either TGFβ receptor, paradoxical activation of TGFβ signalling is seen, suggesting that TGFβ antagonism may confer disease modifying effects similar to those observed in MFS. TGFβ antagonism can be achieved with angiotensin antagonists, such as Losartan, which is able to delay aortic aneurysm development in preclinical models and in patients with MFS. Our case emphasizes the importance of timely recognition of vasculopathy syndromes in patients with hypermobility and the need for early surgical intervention. It also highlights their heterogeneity and the potential for late presentation. Disclosures: The authors have declared no conflicts of interes

Salivary protein adsorption and oral streptococcal adhesion

The aims of this investigation were: 1. to investigate whether oral streptococcal adhesion to artificial solid substrata and human enamel can be described by a thermodynamic model under conditions of moderate shear as encountered in the human oral caviry. 2. to determine the influence of salivary protein adsorption on oral streptococcal adhesion. 3. to elucidate some of the mechanisms by which adsorbed protein layers transfer substratum properties to the interface with adhering microorganisms. ... Zie: Summary