Einstein’s Equation in Nuclear and Solar Energy

Starting from the equation of Einstein (E = m·c2), the chapter proposes a simple and fundamental presentation of the fission and fusion principles, together with some of their applications: nuclear reactors and nuclear propulsion vessels and submarines. Fission and fusion are chosen between the multiple forms of energy, as being the most important forms of nuclear energy, directly related with the equation of Einstein. Some characteristics of solar energy, produced from the fusion process inside the Sun, are deducted from the same equation of Einstein: thermal power of solar radiation; specific power of solar radiation; surface temperature of the Sun; solar constant on different planets, etc. The yearly variation of the solar radiation on each planet of the solar system is also presented

Preliminary investigation of thermal behaviour of PCM based latent heat thermal energy storage

Solid-liquid phase change is used to accumulate and release cold in latent heat thermal energy storage (LHTES) in order to reduce energy consumption of air cooling system in buildings. The storing capacity of the LHTES depends greatly on the exterior air temperatures during the summer nights. One approach in intensifying heat transfer is by increasing the air’s velocity. A LHTES was designed to be integrated in the air cooling system of a building located in Bucharest, during the month of July. This study presents a numerical investigation concerning the impact of air inlet temperatures and air velocity on the formation of solid PCM, on the cold storing capacity and energy consumption of the LHTES. The peak amount of accumulated cold is reached at different air velocities depending on air inlet temperature. For inlet temperatures of 14°C and 15°C, an increase of air velocity above 50% will not lead to higher amounts of cold being stored. For Bucharest during the hottest night of the year, a 100 % increase in air velocity will result in 5.02% more cold being stored, at an increase in electrical energy consumption of 25.30%, when compared to the reference values

Preliminary investigation of thermal behaviour of PCM based latent heat thermal energy storage

Solid-liquid phase change is used to accumulate and release cold in latent heat thermal energy storage (LHTES) in order to reduce energy consumption of air cooling system in buildings. The storing capacity of the LHTES depends greatly on the exterior air temperatures during the summer nights. One approach in intensifying heat transfer is by increasing the air’s velocity. A LHTES was designed to be integrated in the air cooling system of a building located in Bucharest, during the month of July. This study presents a numerical investigation concerning the impact of air inlet temperatures and air velocity on the formation of solid PCM, on the cold storing capacity and energy consumption of the LHTES. The peak amount of accumulated cold is reached at different air velocities depending on air inlet temperature. For inlet temperatures of 14°C and 15°C, an increase of air velocity above 50% will not lead to higher amounts of cold being stored. For Bucharest during the hottest night of the year, a 100 % increase in air velocity will result in 5.02% more cold being stored, at an increase in electrical energy consumption of 25.30%, when compared to the reference values

New Perspective on Performances and Limits of Solar Fresh Air Cooling in Different Climatic Conditions

The study carried out by simulation, concerns the thermal behavior of an office building’s solar fresh air cooling system, based on a LiBr-H2O absorption chiller in different climatic conditions. The coefficient of performance (COP) and the solar fraction were considered performance parameters and were analyzed with respect to the operating limits—the risk of crystallization and maintaining at least a minimum degassing zone. A new correlation between the required solar hot temperature and the cooling water temperature was established and then embedded in another new correlation between the COP and the cooling water temperature that was used in simulations during the whole cooling season corresponding to each location. It was found that—the solar hot water should be maintained in the range of (80–100) °C depending on the cooling water temperature, the COP of the solar LiBr-H2O absorption chiller with or without cold storage tank could reach (76.5–82.4)% depending on the location, and the solar fraction could reach (29.5–62.0)% without cold storage tank and could exceed 100% with cold storage tank, and the excess cooling power being available to cover other types of cooling loads—through the building envelope, from lighting, and from occupants, etc

Potential of HVAC and solar technologies for hospital retrofit to reduce heating energy consumption

The study presents a combination of several energy efficient technologies together with their potential to reduce the energy consumption and to increase the comfort through the retrofit of a hospital building. The existing situation is characterized by an old and inefficient heating system, by the complete missing of any ventilation and by no cooling. The retrofit proposal includes thermal insulation and a distributed HVAC system consisting of several units that includes air to air heat exchangers and air to air heat pumps. A condensing boiler was also considered for heating. A solar thermal system for preparing domestic hot water and a solar photovoltaic system to assist the HVAC units are also proposed. Heat transfer principles are used for modelling the thermal response of the building to the environmental parameters and thermodynamic principles are used for modelling the behaviour of HVAC, solar thermal system and photovoltaic system. All the components of the heating loads were determined for one year period. The study reveals the capacity of the proposed systems to provide ventilation and thermal comfort with a global reduction of energy consumption of 71.6 %

Potential of HVAC and solar technologies for hospital retrofit to reduce heating energy consumption

The study presents a combination of several energy efficient technologies together with their potential to reduce the energy consumption and to increase the comfort through the retrofit of a hospital building. The existing situation is characterized by an old and inefficient heating system, by the complete missing of any ventilation and by no cooling. The retrofit proposal includes thermal insulation and a distributed HVAC system consisting of several units that includes air to air heat exchangers and air to air heat pumps. A condensing boiler was also considered for heating. A solar thermal system for preparing domestic hot water and a solar photovoltaic system to assist the HVAC units are also proposed. Heat transfer principles are used for modelling the thermal response of the building to the environmental parameters and thermodynamic principles are used for modelling the behaviour of HVAC, solar thermal system and photovoltaic system. All the components of the heating loads were determined for one year period. The study reveals the capacity of the proposed systems to provide ventilation and thermal comfort with a global reduction of energy consumption of 71.6 %

Analytical modelling of food storage cooling with solar ammonia-water absorption system, powered by parabolic trough collectors. Method

The study presents a new analytical model capable to reveal the thermal behaviour of all the components of the solar ammonia-water absorption system, powered by parabolic trough collectors, serving different types of food storages: refrigeration chamber, refrigerated food storage, freezing chamber and frozen food storage. The heat inputs, that determine the total cooling load, for each food storage spaces consist of: heat gains through walls, heat gains through ventilation (fresh air), heat that must be dissipated from the stored products (technological cooling load required to cool down the products) and heat gains through operation. The influence of the number of solar parabolic trough collectors and of the storage tank size on different parameters of the refrigeration plant are investigated under low and high storage temperatures. • Food cooling with solar absorption refrigeration system. • Hourly based variation of NH3-H2O solar absorption system performances. • Long term simulation of solar absorption cooling for refrigeration and cooling

Digital image correlation techniques to investigate strain fields and cracking phenomena in asphalt materials

This paper is the outcome of a specific task group of the RILEM Technical Committee 241-MCD "Mechanisms of Cracking and Debonding in Asphalt and Composite Pavements". The group on "Advanced Measurement Techniques" was established in 2011 to investigate DIC applications for non-destructive and non-contact measurements of strain fields during laboratory testing. The paper illustrates different DIC/optical flow applications in measuring strain distribution during laboratory testing. Specific applications of DIC for evaluating crack initiation and crack propagation in asphalt materials are presented