50 research outputs found
Colors For Wool Yarn
Colors for Wool Yarn is a manual used by the Du Pont Company to mix dyes for wool yarn. This book contains comprehensive information regarding the range of du Pont dyes suitable for application on wool in all stages of manufacture. Dyeings of both acid and chrome colors are shown on wool yarn. In addition, general dyeing instructions have been incorporated as well as a tabulation embracing most of the working and fastness properties. The following pages also contain specific information on the dyeing properties of the individual colors --Introduction, page 3.https://digitalcommons.winthrop.edu/rarebooks/1159/thumbnail.jp
Recommended from our members
Atomic Energy Commission Reports MDDC-417
Technical drawings of nuclear reactor design
Recommended from our members
²³⁸Pu Fuel-Form Processes Quarterly report, April-June 1982
Progress in studies of /sup 238/Pu fuel form processes is reported. Analytical studies of weld-quench cracking in DOP-26 iridium alloy-clad vent sets in General Purpose Heat Sources (GPHS) showed that weld-quench cracking is much more severe in MER alloy than in LR and NR alloys. Spark source mass spectrometry indicated that areas in DOP-26 alloy with severe weld-quench cracking have high thorium inhomogeneity. Secondary ion mass spectrometry revealed differences in LR and MR alloys that may be related to their dissimilar susceptibilities for weld-quench cracking. Impact ductility tests showed that welds in DOP-26 alloy clad vent sets made using parameters similar to PuFF production welding had high elongations. Decontamination of encapsulated GPHS pellets in PuFF was demonstrated using a solution of 3.5 M HNO/sub 3/ + 6.4 M HF which is capable of reducing transferable contamination below the specified 10/sup 3/ dpm upper limit in <30 minutes at a bath temperature of 80/sup 0/C using ultrasonic cleaning. Decontamination vessels were constructed to trap and condense acid vapors during decontamination. Impact and metallographic data showed that although the micro and macrostructures between LANL and SRL pellets have large differences, the difference in impact response between these two types of pellets is not correspondingly large. Both types of pellets have impacted successfully. The micro and macrostructures of SRP pellets made with either low fired shards sintered in Ar/5%O/sub 2/ or Ar are intermediate between those of the LANL and SRL pellets. Therefore, either type of SRP pellet should impact successfully
Hand book of explosives for farmers, planters, ranchers; how to clear land ...
117, [3] p
Setamine colors for tin-weighted silk /
Includes samples of dyed silk.Mode of access: Internet