Ion counting efficiencies at the IGISOL facility

At the IGISOL-JYFLTRAP facility, fission mass yields can be studied at high precision. Fission fragments from a U target are passing through a Ni foil and entering a gas filled chamber. The collected fragments are guided through a mass separator to a Penning trap where their masses are identified. This simulation work focuses on how different fission fragment properties (mass, charge and energy) affect the stopping efficiency in the gas cell. In addition, different experimental parameters are varied (e. g. U and Ni thickness and He gas pressure) to study their impact on the stopping efficiency. The simulations were performed using the Geant4 package and the SRIM code. The main results suggest a small variation in the stopping efficiency as a function of mass, charge and kinetic energy. It is predicted that heavy fragments are stopped about 9% less efficiently than the light fragments. However it was found that the properties of the U, Ni and the He gas influences this behavior. Hence it could be possible to optimize the efficiency.Comment: 52 pages, 44 figure

Light-ion production in the interaction of 96 MeV neutrons with oxygen

Double-differential cross sections for light-ion (p, d, t, He-3 and alpha) production in oxygen, induced by 96 MeV neutrons are reported. Energy spectra are measured at eight laboratory angles from 20 degrees to 160 degrees in steps of 20 degrees. Procedures for data taking and data reduction are presented. Deduced energy-differential and production cross sections are reported. Experimental cross sections are compared to theoretical reaction model calculations and experimental data at lower neutron energies in the literature. The measured proton data agree reasonably well with the results of the model calculations, whereas the agreement for the other particles is less convincing. The measured production cross sections for protons, deuterons, tritons and alpha particles support the trends suggested by data at lower energies.Comment: 21 pages, 13 figures, submitted to Phys. Rev.

Propagation of nuclear data uncertainties for ELECTRA burn-up calculations

The European Lead-Cooled Training Reactor (ELECTRA) has been proposed as a training reactor for fast systems within the Swedish nuclear program. It is a low-power fast reactor cooled by pure liquid lead. In this work, we propagate the uncertainties in Pu-239 transport data to uncertainties in the fuel inventory of ELECTRA during the reactor life using the Total Monte Carlo approach (TMC). Within the TENDL project the nuclear models input parameters were randomized within their uncertainties and 740 Pu-239 nuclear data libraries were generated. These libraries are used as inputs to reactor codes, in our case SERPENT, to perform uncertainty analysis of nuclear reactor inventory during burn-up. The uncertainty in the inventory determines uncertainties in: the long-term radio-toxicity, the decay heat, the evolution of reactivity parameters, gas pressure and volatile fission product content. In this work, a methodology called fast TMC is utilized, which reduces the overall calculation time. The uncertainty in the long-term radiotoxicity, decay heat, gas pressure and volatile fission products were found to be insignificant. However, the uncertainty of some minor actinides were observed to be rather large and therefore their impact on multiple recycling should be investigated further. It was also found that, criticality benchmarks can be used to reduce inventory uncertainties due to nuclear data. Further studies are needed to include fission yield uncertainties, more isotopes, and a larger set of benchmarks.Comment: 4 pages, 4 figures, Proc. 2013 International Conference on Nuclear Data for Science & Technology (ND2013), March 4-8, 2013, New York, USA, to be published in Nuclear Data Sheet

Rapid communication: Linkage mapping of the porcine Agouti gene

Genus and Species. Sus scrofa. Locus. Porcine agouti gene. Source and Description of Primers. The forward primer was designed from pig sequence (GenBank accession no. AF018166) and the reverse primer was developed from comparing the homologous regions of mouse and bovine agouti sequences (GenBank accession no. L06451 and X99691, respectively). The primers were used to amplify approximately 1.4 kb of the porcine agouti gene fragment spanning exons 2 and 3. Sequences of the PCR fragment revealed 83% and 89% exonic identities to the corresponding human and bovine agouti nucleotide sequences, respectively. The porcine agouti sequence has been submitted to GenBank, accession no. AF133261

95 MeV neutron scattering on hydrogen, deuterium, carbon, and oxygen

Three neutron-deuteron scattering experiments at 95 MeV have been performed recently at The Svedberg Laboratory in Uppsala. Subsets of the results of these experiments have been reported in two short articles, showing clear evidence for three-nucleon force effects. In this paper, we present a more detailed description of the experimental methods as well as further discussion of the results. In addition to neutron-deuteron scattering data, neutron-proton and 12 C(n, n) elastic scattering data have been measured for normalization purposes, and 16 O (n, n) data have been obtained for the first time at this energy. It was possible to extract 12 C(n, n )and 16 O (n, n ) inelastic scattering cross sections to excited states below 12 MeV excitation energy. The inelastic scattering data (for both carbon and oxygen) are shown to have a significant impact on the determination ofnuclear recoil kerma coefficients

Measurement of the Absolute Differential Cross Section for np Elastic Scattering at 194 MeV

A tagged medium-energy neutron beam has been used in a precise measurement of the absolute differential cross section for np back-scattering. The results resolve significant discrepancies within the np database concerning the angular dependence in this regime. The experiment has determined the absolute normalization with 1.5% uncertainty, suitable to verify constraints of supposedly comparable precision that arise from the rest of the database in partial wave analyses. The analysis procedures, especially those associated with evaluation of systematic errors in the experiment, are described in detail so that systematic uncertainties may be included in a reasonable way in subsequent partial wave analysis fits incorporating the present results.Comment: 22 pages, 21 figures, submitted for publication in Physical Review