Expanding the Repertoire of Carbapenem-Hydrolyzing Metallo-ß-Lactamases by Functional Metagenomic Analysis of Soil Microbiota

Carbapenemases are bacterial enzymes that hydrolyze carbapenems, a group of last-resort β-lactam antibiotics used for treatment of severe bacterial infections. They belong to three β-lactamase classes based amino acid sequence (A, B, and D). The aim of this study was to elucidate occurrence, diversity and functionality of carbapenemase-encoding genes in soil microbiota by functional metagenomics. Ten plasmid libraries were generated by cloning metagenomic DNA from agricultural (n = 6) and grassland (n = 4) soil into Escherichia coli. The libraries were cultured on amoxicillin-containing agar and up to 100 colonies per library were screened for carbapenemase production by CarbaNP test. Presumptive carbapenemases were characterized with regard to DNA sequence, minimum inhibitory concentration (MIC) of β-lactams, and imipenem hydrolysis. Nine distinct class B carbapenemases, also known as metallo-beta-lactamases (MBLs), were identified in six soil samples, including two subclass B1 (GRD23-1 and SPN79-1) and seven subclass B3 (CRD3-1, PEDO-1, GRD33-1, ESP-2, ALG6-1, ALG11-1, and DHT2-1). Except PEDO-1 and ESP-2, these enzymes were distantly related to any previously described MBLs (33 to 59% identity). RAIphy analysis indicated that six enzymes (CRD3-1, GRD23-1, DHT2-1, SPN79-1, ALG6-1, and ALG11-1) originated from Proteobacteria, two (PEDO-1 and ESP-2) from Bacteroidetes and one (GRD33-1) from Gemmatimonadetes. All MBLs detected in soil microbiota were functional when expressed in E. coli, resulting in detectable imipenem-hydrolyzing activity and significantly increased MICs of clinically relevant β-lactams. Interestingly, the MBLs yielded by functional metagenomics generally differed from those detected in the same soil samples by antibiotic selective culture, showing that the two approaches targeted different subpopulations in soil microbiota. © 2016 Gudeta, Bortolaia, Pollini, Docquier, Rossolini, Amos, Wellington and Guardabassi.Grant HEALTH-F3-2011-282004(EvoTAR

Resistencia a carbapenemes en aislamientos de Pseudomonas aeruginosa: un ejemplo de interacción entre distintos mecanismos

Objetivo. Identificar la proteína de membrana externa ausente en los aislamientos resistentes y determinar tanto las causas de su ausencia en la membrana, como la presencia de otros mecanismos de resistencia a carbapenemes en aislamientos clínicos de Pseudomonas aeruginosa. Métodos. Se estudió un brote de 20 aislamientos de P. aeruginosa previamente caracterizados como productores de la metalobetalactamasa IMP-13. Estos aislamientos presentaron igual expresión de la enzima IMP-13, pero solo cinco de ellos fueron resistentes a carbapenemes. En esos cinco aislamientos resistentes se confirmó la ausencia de una proteína de membrana externa. Se secuenciaron oprD y ampC; se identificaron las proteínas de membrana externa por desorción/ionización láser asistida por matriz/espectometría de masa tiempo de vuelo (MALDI-TOF); se determinó el nivel de expresión de OprD, de AmpC y de los sistemas de eflujo tipo Mex, por reacción en cadena de polimerasa en tiempo real, y por último, se determinó la contribución del déficit de OprD a la resistencia a carbapenemes. Resultados. La proteína de la membrana externa ausente en el grupo R (resistentes a ambos carbapenemes) fue identificada como OprD-TS, pero no se observaron variaciones en su expresión. El gen oprD presentó mutaciones en los cinco aislamientos resistentes. Se observó la misma producción de la enzima tipo AmpC PDC-5 y del sistema de eflujo Mex AB-OprM entre los aislamientos sensibles y resistentes a carbapenemes. Se analizó cómo la presencia conjunta de IMP-13 y el déficit de OprD contribuyen al aumento de la resistencia. Conclusiones. Distintos mecanismos contribuyen a la resistencia de aislamientos productores de IMP-13 a carbapenemes. La posibilidad de no detectar estos aislamientos productores de IMP-13 representa un riesgo latente de selección de mutantes con mecanismos de resistencia que se suman para aumentar la resistencia a carbapenemes.Fil: Santella, Gisela. Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica; ArgentinaFil: Pollini, Simona. Università degli Studi di Siena; ItaliaFil: Docquier, Jean Denis. Università degli Studi di Siena; ItaliaFil: Almuzara, Marisa. Provincia de Buenos Aires. Ministerio de Salud. Hospital Interzonal de Agudos "Eva Perón"; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Gutkind, Gabriel Osvaldo. Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Rossolini, Gian Maria. Università degli Studi di Siena; ItaliaFil: Radice, Marcela Alejandra. Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentin

In Vitro Synergism of Colistin and N-acetylcysteine against Stenotrophomonas maltophilia

Stenotrophomonas maltophilia is an emerging global opportunistic pathogen, responsible for a wide range of human infections, including respiratory tract infections. Intrinsic multidrug resistance and propensity to form biofilms make S. maltophilia infections recalcitrant to treatment. Colistin is among the second-line options in case of difficult-to-treat S. maltophilia infections, with the advantage of being also administrable by nebulization. We investigated the potential synergism of colistin in combination with N-acetylcysteine (NAC) (a mucolytic agent with antioxidant and anti-inflammatory properties) against S. maltophilia grown in planktonic phase and biofilm. Eighteen S. maltophilia clinical isolates (comprising three isolates from cystic fibrosis (CF) and two trimethoprim-sulfamethoxazole (SXT)-resistant strains) were included. Checkerboard assays showed a synergism of colistin/NAC combinations against the strains with colistin Minimum Inhibitory Concentration (MIC) >2 µg/mL (n = 13), suggesting that NAC could antagonize the mechanisms involved in colistin resistance. Nonetheless, time-kill assays revealed that NAC might potentiate colistin activity also in case of lower colistin MICs. A dose-dependent potentiation of colistin activity by NAC was also clearly observed against S. maltophilia biofilms, also at sub-MIC concentrations. Colistin/NAC combinations, at concentrations likely achievable by topical administration, might represent a valid option for the treatment of S. maltophilia respiratory infections and should be examined further

Spectroscopic characterization of natural melanin from a Streptomyces cyaneofuscatus strain and comparison with melanin enzymatically synthesized by tyrosinase and laccase

An actinobacteria strain was isolated from Algerian Sahara soil and assigned to Streptomyces cyaneofuscatus Pridham et al. 1958 species. This strain was selected for its ability to produce melanin exopigments in liquid and solid media. Melanin synthesis was associated with tyrosinase activity and the enzyme from this strain was isolated and biochemically characterized. Synthetic melanin was then enzymatically produced using the S. cyaneofuscatus Pridham et al. 1958 tyrosinase. As this enzyme showed a higher diphenolase activity, a synthetic melanin from the enzymic oxidation of 3,4-dihydroxyphenylalanine (dopa) was obtained by the use of a Trametes versicolor (L.) Lloyd laccase for comparison. The natural and synthetic pigments were physico-chemically characterized by the use of ultraviolet (UV)-Visible, and Fourier transform infrared (FT-IR) and multifrequency electron paramagnetic resonance (EPR) spectroscopies. All the melanin samples displayed a stable free radical when analyzed by X-band EPR spectroscopy. Once the samples were recorded at Q-band EPR, a copolymer derived from a mixture of different constituents was evident in the natural melanin. All radical species were analyzed and discussed. The use of water-soluble melanin naturally produced by S. cyaneofuscatus Pridham et al. 1958 represents a new biotechnological alternative to commercial insoluble pigments

In vitro and in vivo efficacy, toxicity, bio-distribution and resistance selection of a novel antibacterial drug candidate

A synthetic antimicrobial peptide was identified as a possible candidate for the development of a new antibacterial drug. The peptide, SET-M33L, showed a MIC90 below 1.5 μM and 3 μM for Pseudomonas aeruginosa and Klebsiella pneumoniae, respectively. In in vivo models of P. aeruginosa infections, the peptide and its pegylated form (SET-M33L-PEG) enabled a survival percentage of 60-80% in sepsis and lung infections when injected twice i.v. at 5 mg/Kg, and completely healed skin infections when administered topically. Plasma clearance showed different kinetics for SET-M33L and SET-M33L-PEG, the latter having greater persistence two hours after injection. Bio-distribution in organs did not show significant differences in uptake of the two peptides. Unlike colistin, SET-M33L did not select resistant mutants in bacterial cultures and also proved non genotoxic and to have much lower in vivo toxicity than antimicrobial peptides already used in clinical practice. The characterizations reported here are part of a preclinical development plan that should bring the molecule to clinical trial in the next few years

Diagnosis of Imported Dengue and Zika Virus Infections in Italy from November 2015 to November 2022: Laboratory Surveillance Data from a National Reference Laboratory

Dengue (DENV) and Zika (ZIKV) viruses are mosquito-borne human pathogens. In Italy, the presence of the competent vector Aedes albopictus increases the risk of autochthonous transmission, and a national plan for arboviruses prevention, surveillance, and response (PNA 2020–2025) is in place. The results of laboratory diagnosis of both viruses by the National Reference Laboratory for arboviruses (NRLA) from November 2015 to November 2022 are presented. Samples from 655 suspected cases were tested by both molecular and serological assays. Virus and antibody kinetics, cross-reactivity, and diagnostic performance of IgM ELISA systems were analysed. Of 524 cases tested for DENV, 146 were classified as confirmed, 7 as probable, while 371 were excluded. Of 619 cases tested for ZIKV, 44 were classified as confirmed, while 492 were excluded. All cases were imported. Overall, 75.3% (110/146) of DENV and 50% (22/44) of ZIKV cases were confirmed through direct virus detection methods. High percentages of cross reactivity were observed between the two viruses. The median lag time from symptoms onset to sample collection was 7 days for both DENV molecular (range 0–20) and NS1 ELISA (range 0–48) tests, with high percentages of positivity also after 7 days (39% and 67%, respectively). For ZIKV, the median lag time was 5 days (range 0–22), with 16% positivity after 7 days. Diagnostic performance was assessed with negative predictive values ranging from 92% to 95% for the anti-DENV systems, and of 97% for the ZIKV one. Lower positive predictive values were seen in the tested population (DENV: 55% to 91%, ZIKV: 50%). DENV and ZIKV diagnosis by molecular test is the gold standard, but sample collection time is a limitation. Serological tests, including Plaque Reduction Neutralization Test, are thus necessary. Co-circulation and cross-reactivity between the two viruses increase diagnostic difficulty. Continuous evaluation of diagnostic strategies is essential to improve laboratory testing

The SARS-CoV-2 viral load in COVID-19 patients is lower on face mask filters than on nasopharyngeal swabs.

Face masks and personal respirators are used to curb the transmission of SARS-CoV-2 in respiratory droplets; filters embedded in some personal protective equipment could be used as a non-invasive sample source for applications, including at-home testing, but information is needed about whether filters are suited to capture viral particles for SARS-CoV-2 detection. In this study, we generated inactivated virus-laden aerosols of 0.3-2 microns in diameter (0.9 µm mean diameter by mass) and dispersed the aerosolized viral particles onto electrostatic face mask filters. The limit of detection for inactivated coronaviruses SARS-CoV-2 and HCoV-NL63 extracted from filters was between 10 to 100 copies/filter for both viruses. Testing for SARS-CoV-2, using face mask filters and nasopharyngeal swabs collected from hospitalized COVID-19-patients, showed that filter samples offered reduced sensitivity (8.5% compared to nasopharyngeal swabs). The low concordance of SARS-CoV-2 detection between filters and nasopharyngeal swabs indicated that number of viral particles collected on the face mask filter was below the limit of detection for all patients but those with the highest viral loads. This indicated face masks are unsuitable to replace diagnostic nasopharyngeal swabs in COVID-19 diagnosis. The ability to detect nucleic acids on face mask filters may, however, find other uses worth future investigation

Development of a Hybrid Simulator for Underwater Vehicles With Manipulators

This article describes a hybrid simulation approach meant to facilitate the realization of a simulator for underwater vehicles with one or more manipulators capable of simulating the interaction of the vehicle with objects and structures of the environment. The hybrid simulation approach is first described and motivated analytically, then an analysis of simulation accuracy is proposed, where, in particular, the implications of added mass simulation are discussed. Then, a possible implementation of the proposed architecture is shown, where a robotic simulator of articulated bodies, capable of stable and accurate simulation of contact forces, although unfit to simulate any serious hydrodynamic model, is tightly interfaced with a general purpose dynamic systems simulator that is used to simulate the hydrodynamic forces, the vehicle guidance, navigation, and control system, and also a man–machine interface. Software details and the technicalities needed to interface the two simulators are also briefly presented. Finally, the results of the simulation of three operational scenarios are proposed as qualitative assessment of the simulator capabilities

Development of a Hybrid Simulator for Underwater Vehicles With Manipulators

This article describes a hybrid simulation approach meant to facilitate the realization of a simulator for underwater vehicles with one or more manipulators capable of simulating the interaction of the vehicle with objects and structures of the environment. The hybrid simulation approach is first described and motivated analytically, then an analysis of simulation accuracy is proposed, where, in particular, the implications of added mass simulation are discussed. Then, a possible implementation of the proposed architecture is shown, where a robotic simulator of articulated bodies, capable of stable and accurate simulation of contact forces, although unfit to simulate any serious hydrodynamic model, is tightly interfaced with a general purpose dynamic systems simulator that is used to simulate the hydrodynamic forces, the vehicle guidance, navigation, and control system, and also a man–machine interface. Software details and the technicalities needed to interface the two simulators are also briefly presented. Finally, the results of the simulation of three operational scenarios are proposed as qualitative assessment of the simulator capabilities