Synthesis of biodegradable polyesteramides with pendant functional groups

Morpholine-2,5-dione derivatives having substituents with benzyl-protected carboxylic acid, benzyloxycarbonyl-protected amine and p-methoxy-protected thiol groups, respectively, were prepared in 29-58% yield by cyclization of the corresponding N-[(2RS)-bromopropionyl]-L-amino acids. Polyesteramides with protected pendant functional groups were obtained by ring-opening copolymerization of either ε-caprolactone or DL-lactide with morpholine-2,5-dione derivatives having protected functional substituents. The copolymerizations were carried out in the bulk at 130°C using stannous octoate as an initiator and using low mole fractions (0,05, 0,10 and 0,20) of morpholine-2,5-dione derivatives in the feed. The molecular weight of the resulting copolymers ranged from 1,4 to 8,3 · 104. The ring-opening homopolymerization of morpho-line-2,5-dione derivatives with protected functional substituents was not successful. Polyesteramides with either pendant carboxylic acid groups or pendant amine groups were prepared by catalytic hydrogenation of the corresponding protected copolymers. Treatment of copolymers having pendant p-methoxybenzyl-protected thiol groups with trifluoromethanesulfonic acid resulted not only in the removal of the p-methoxybenzyl group but also in severe degradation of the copolymers, due to acidolysis of main-chain ester bonds

Copolymerization of ε-caprolactone and morpholine-2,5-dione derivatives

Novel biodegradable poly(ester-amide)s were prepared by ring-opening copolymerization of -caprolactone and 3- and/or 6-alkyl-substituted morpholine-2,5-dione derivatives. The copolymerizations were carried out in the bulk using stannous octoate as an initiator. Molecular weights of the copolymers ranged from 1,0 · 104 to 8,3 · 104 and decreased with increasing mole fractions of morpholine-2,5-dione derivatives in the feed. 13C NMR sequence analysis indicated that the copolymers had a random distribution of -oxycaproyl and depsipeptide units, which resulted from the occurrence of transesterification reactions during copolymerization. The results of the DSC measurements and 13C NMR sequence analysis showed a close relationship between the crystallinity and average length of ε-oxycaproyl blocks. Copolymers with a mole fraction of depsipeptide units smaller than 0,20 were semi-crystalline, whereas incorporation of larger amounts of depsipeptide units resulted in amorphous copolymers. The melting point depression as a function of the molar composition of the semi-crystalline copolymers was in good agreement with the melting point depression predicted by the Baur equation, which indicated the rejection of depsipeptide units from crystals consisting of ε-oxycaproyl units

Glycine/Glycolic acid based copolymers

Glycine/glycolic acid based biodegradable copolymers have been prepared by ring-opening homopolymerization of morpholine-2,5-dione, and ring-opening copolymerization of morpholine-2,5-dione and glycolide. The homopolymerization of morpholine-2,5-dione was carried out in the melt at 200°C for 3 min using stannous octoate as an initiator, and continued at lower reaction temperatures (100-160°C) for 2-48 h. The highest yields (60%) and intrinsic viscosities ([] = 0.50 dL/g; DMSO, 25°C) were obtained after 3 min reaction at 200°C and 17 h at 130°C using a molar ratio of monomer and initiator of 1000. The polymer prepared by homopolymerization of morpholine-2,5-dione was composed of alternating glycine and glycolic acid residues, and had a glass transition temperature of 67°C and a melting temperature of 199°C. Random copolymers of glycine and glycolic acid were synthesized by copolymerization of morpholine-2,5-dione and glycolide in the melt at 200°C, followed by 17 h reaction at 130°C using stannous octoate as an initiator. The morphology of the copolymers varied from semi-crystalline to amorphous, depending on the mole fraction of glycolic acid residues incorporated

Effect of Short Chain Branching on the Interlamellar Structure of Semicrystalline Polyethylene

We use molecular simulations with a united atom force field to examine the effect of short chain branching (SCB) on the noncrystalline, interlamellar structure typical of linear low density polyethylene (LLDPE). The model is predicated on a metastable thermodynamic equilibrium within the interlamellar space of the crystal stack and accounts explicitly for the various chain topologies (loops, tails, and bridges) therein. We examine three branched systems containing methyl, ethyl, and butyl side branches and compare our results to high density polyethylene (HDPE), without branches. We also compare results for two united atom force fields, PYS and TraPPE-UA, within the context of these simulations. In contrast to conventional wisdom, our simulations indicate that the thicknesses of the interfacial regions in systems with SCB are smaller than those observed for a linear polyethylene without branches and that branches are uniformly distributed throughout the interlamellar region. We find a prevalence of gauche states along the backbone due to the presence of branches and an abrupt decrease in the orientational order in the region immediately adjacent to the crystallite

Melt block copolymerization of ε-caprolactone and L-lactide

AB block copolymers of ε-caprolactone and (L)-lactide could be prepared by ring-opening polymerization in the melt at 110°C using stannous octoate as a catalyst and ethanol as an initiator provided ε-caprolactone was polymerized first. Ethanol initiated the polymerization of ε-caprolactone producing a polymer with ε-caprolactone derived hydroxyl end groups which after addition of L-lactide in the second step of the polymerization initiated the ring-opening copolymerization of L-lactide. The number-average molecular weights of the poly(ε-caprolactone) blocks varied from 1.5 to 5.2 × 103, while those of the poly(L-lactide) blocks ranged from 17.4 to 49.7 × 103. The polydispersities of the block copolymers varied from 1.16 to 1.27. The number-average molecular weights of the polymers were controlled by the monomer/hydroxyl group ratio, and were independent on the monomer/stannous octoate ratio within the range of experimental conditions studied. When L-lactide was polymerized first, followed by copolymerization of ε-caprolactone, random copolymers were obtained. The formation of random copolymers was attributed to the occurrence of transesterification reactions. These side reactions were caused by the ε-caprolactone derived hydroxyl end groups generated during the copolymerization of ε-caprolactone with pre-polymers of L-lactide. The polymerization proceeds through an ester alcoholysis reaction mechanism, in which the stannous octoate activated ester groups of the monomers react with hydroxyl groups

Технологические решения для строительства эксплуатационной наклонно-направленной скважины на Палеозойскую систему нефтяного месторождения

Целью работы является проектирование эксплуатационной наклонно-направленной скважины на палеозойскую систему нефтяного месторождения с отбором керна в интервале продуктивного пласта.The aim of the work is to design a production directional well for the Paleozoic system of an oil field with core sampling in the interval of the productive formation

Detection and localization of early- and late-stage cancers using platelet RNA

Cancer patients benefit from early tumor detection since treatment outcomes are more favorable for less advanced cancers. Platelets are involved in cancer progression and are considered a promising biosource for cancer detection, as they alter their RNA content upon local and systemic cues. We show that tumor-educated platelet (TEP) RNA-based blood tests enable the detection of 18 cancer types. With 99% specificity in asymptomatic controls, thromboSeq correctly detected the presence of cancer in two-thirds of 1,096 blood samples from stage I–IV cancer patients and in half of 352 stage I–III tumors. Symptomatic controls, including inflammatory and cardiovascular diseases, and benign tumors had increased false-positive test results with an average specificity of 78%. Moreover, thromboSeq determined the tumor site of origin in five different tumor types correctly in over 80% of the cancer patients. These results highlight the potential properties of TEP-derived RNA panels to supplement current approaches for blood-based cancer screening

In-vitro degradation of polyesteramides containing poly-n-caprolactone blocks

Most biogradable polymers have been designed to have hydrolytically instable bonds in the polymer backbone. By cleavage of these labile bonds, the generally water-insoluble macromolecules are converted into water soluble oligomers. This process may occur in the bulk of the material as well as at the surface depending on the hydrophobicity of the polymeric backbone and stability towards hydrolysis of the functional groups incorporated. Polyester-amides, copolymers of ¿-amino acids and hydroxy acids have been synthesized by the ring-opening copolymerization of cyclo(α-amino acid-α-hydroxy acids) and lactones as lactide and ¿-caprolactone. The in vitro degradation of polyesters and poly(ester-amides) can be described by bulk hydrolysis of ester bonds which results in a decrease of the molecular weight. Weight loss starts when the molecular weight of the polymer chains has sufficiently decreased. The period required for complete degradation depends on the type of polymer, the crystallinity, the initial molecular weight of the samples, and the glass transition temperature. The kinetics of the hydrolysis of ester bonds in polyesters and polyesteramides have been analyzed by determining the molecular weight as a function of time before the start of weight loss. During this period the molecular weight distribution and overall composition does not change. The degradation kinetics of the polyesters and polyesteramides can be described either as a process autocatalyzed by the generated carboxylic acid end groups, or as a non-catalyzed hydrolysis