Quantum spin Hall edge states and interlayer coupling in twisted-bilayer WTe2_2

The quantum spin Hall (QSH) effect, characterized by topologically protected spin-polarized edge states, was recently demonstrated in monolayers of the transition metal dichalcogenide (TMD) WTe$_2$. However, the robustness of this topological protection remains largely unexplored in van der Waals heterostructures containing one or more layers of a QSH insulator. In this work, we use scanning tunneling microscopy and spectroscopy (STM/STS) to explore the topological nature of twisted bilayer (tBL) WTe$_2$ which is produce from folded monolayers, as well as, tear-and-stack fabrication. At the tBL bilayer edge, we observe the characteristic spectroscopic signature of the QSH edge state that is absent in topologically trivial as-grown bilayer. For small twist angles, a rectangular moir\'e pattern develops, which results in local modifications of the band structure. Using first principles calculations, we quantify the interactions in tBL WTe$_2$ and its topological edge states as function of interlayer distance and conclude that it is possible to tune the topology of WTe$_2$ bilayers via the twist angle as well as interlayer interactions

Stenosis Length and Degree Interact With the Risk of Cerebrovascular Events Related to Internal Carotid Artery Stenosis

Background and Purpose: Internal carotid artery stenosis (ICAS)≥70% is a leading cause of ischemic cerebrovascular events (ICVEs). However, a considerable percentage of stroke survivors with symptomatic ICAS (sICAS) have <70% stenosis with a vulnerable plaque. Whether the length of ICAS is associated with high risk of ICVEs is poorly investigated. Our main aim was to investigate the relation between the length of ICAS and the development of ICVEs.Methods: In a retrospective cross-sectional study, we identified 95 arteries with sICAS and another 64 with asymptomatic internal carotid artery stenosis (aICAS) among 121 patients with ICVEs. The degree and length of ICAS as well as plaque echolucency were assessed on ultrasound scans.Results: A statistically significant inverse correlation between the ultrasound-measured length and degree of ICAS was detected for sICAS≥70% (Spearman correlation coefficient ρ = –0.57, p < 0.001, n = 51) but neither for sICAS<70% (ρ = 0.15, p = 0.45, n = 27) nor for aICAS (ρ = 0.07, p = 0.64, n = 54). The median (IQR) length for sICAS<70% and ≥70% was 17 (15–20) and 15 (12–19) mm (p = 0.06), respectively, while that for sICAS<90% and sICAS 90% was 18 (15–21) and 13 (10–16) mm, respectively (p < 0.001). Among patients with ICAS <70%, a cut-off length of ≥16 mm was found for sICAS rather than aICAS with a sensitivity and specificity of 74.1% and 51.1%, respectively. Irrespective of the stenotic degree, plaques of the sICAS compared to aICAS were significantly more often echolucent (43.2 vs. 24.6%, p = 0.02).Conclusion: We found a statistically insignificant tendency for the ultrasound-measured length of sICAS<70% to be longer than that of sICAS≥70%. Moreover, the ultrasound-measured length of sICAS<90% was significantly longer than that of sICAS 90%. Among patients with sICAS≥70%, the degree and length of stenosis were inversely correlated. Larger studies are needed before a clinical implication can be drawn from these results

Groundwater Use Habits and Environmental Awareness in Ca Mau Province, Vietnam: Implications for Sustainable Water Resource Management

The Vietnamese Mekong Delta including Ca Mau province (CMP) is seriously affected by land subsidence. Groundwater over-extraction is considered to be a major driver for this process. To address the reduction of groundwater (GW) extraction as a potential counter measure for further subsidence, this study focuses on understanding the importance of GW in people\u27s life and water using habits as well as their awareness with current environmental problems in Ca Mau. Therefore, GW sampling campaigns and surveys were conducted in all 9 districts of Ca Mau province in 2019 and 2020. The analyzed water samples showed a connection with information from questionnaires and created a general picture of water using habits. GW plays an important role in people\u27s lives, it is used for washing, cooking, drinking and other activities. People use GW for different purposes depending on their perception of water quality. For important and direct health related purposes, such as cooking or drinking, people prepare to treat water more carefully or choose another alternative water resource. The analytical approach to evaluation results based on viewpoints from general to detail helped to dig deeper into people\u27s stories to explain research results with their behavior in each situation. When people are dependent on GW and have no option to use alternative water resources, the importance level of GW in their life increases and their awareness of GW over-extraction becomes less. If people have another water source to use such as tap water (TW), habits of using GW change. This opens up the idea that a potential alternative water will reduce the dependence of people on GW and protect GW from over-exploitation. Besides, people in Ca Mau do not have much awareness of land subsidence or the reason leading to environmental problems. Therefore, raising the awareness of people by well-design education campaigns should be strongly considered

KIT’s IWSLT 2020 SLT Translation System

This paper describes KIT’s submissions to the IWSLT2020 Speech Translation evaluation campaign. We first participate in the simultaneous translation task, in which our simultaneous models are Transformer based and can be efficiently trained to obtain low latency with minimized compromise in quality. On the offline speech translation task, we applied our new Speech Transformer architecture to end-to-end speech translation. The obtained model can provide translation quality which is competitive to a complicated cascade. The latter still has the upper hand, thanks to the ability to transparently access to the transcription, and resegment the inputs to avoid fragmentation

KIT’s IWSLT 2021 Offline Speech Translation System

This paper describes KIT’submission to the IWSLT 2021 Offline Speech Translation Task. We describe a system in both cascaded condition and end-to-end condition. In the cascaded condition, we investigated different end-to-end architectures for the speech recognition module. For the text segmentation module, we trained a small transformer-based model on high-quality monolingual data. For the translation module, our last year’s neural machine translation model was reused. In the end-to-end condition, we improved our Speech Relative Transformer architecture to reach or even surpass the result of the cascade system

3D-printed mouthpiece adapter for sampling exhaled breath in medical applications

The growing use of 3D printing in the biomedical sciences demonstrates its utility for a wide range of research and healthcare applications, including its potential implementation in the discipline of breath analysis to overcome current limitations and substantial costs of commercial breath sampling interfaces. This technical note reports on the design and construction of a 3D-printed mouthpiece adapter for sampling exhaled breath using the commercial respiration collector for in-vitro analysis (ReCIVA) device. The paper presents the design and digital workflow transition of the adapter and its fabrication from three commercial resins (Surgical Guide, Tough v5, and BioMed Clear) using a Formlabs Form 3B stereolithography (SLA) printer. The use of the mouthpiece adapter in conjunction with a pulmonary function filter is appraised in comparison to the conventional commercial silicon facemask sampling interface. Besides its lower cost – investment cost of the printing equipment notwithstanding – the 3D-printed adapter has several benefits, including ensuring breath sampling via the mouth, reducing the likelihood of direct contact of the patient with the breath sampling tubes, and being autoclaveable to enable the repeated use of a single adapter, thereby reducing waste and associated environmental burden compared to current one-way disposable facemasks. The novel adapter for breath sampling presented in this technical note represents an additional field of application for 3D printing that further demonstrates its widespread applicability in biomedicine

Cutaneous Complications Secondary to Haemostasis Abnormalities in COVID-19 Infection

We describe the case of a patient hospitalized for acute decompensated heart failure in a standard medical ward. During hospitalization, he was diagnosed with COVID-19 and transferred to a special unit. The clinical course was marked by worsening of the respiratory disease, the development of right parotiditis and thrombosis of the left internal jugular vein. Therapeutic anticoagulation was initiated and 2 days later, the minimal dermatoporosis lesions previously present in the upper extremities evolved to haemorrhagic bullae with intra-bullae blood clots and dissecting haematomas. Surgical management of the dissecting haematomas was difficult in the context of haemostasis abnormalities. The patient died 29 days after hospital admission