Functionalization of transparent conductive oxide electrode for TiO2-free perovskite solar cells

Many of the best performing solar cells based on perovskite-halide light absorbers use TiO2 as an electron selective contact layer. However, TiO2 usually requires high temperature sintering, is related to electrical instabilities in perovskite solar cells, and causes cell performance degradation under full solar spectrum illumination. Here we demonstrate an alternative approach based on the modification of transparent conductive oxide electrodes with self-assembled siloxane-functionalized fullerene molecules, eliminating TiO2 or any other additional electron transporting layer. We demonstrate that these molecules spontaneously form a homogenous monolayer acting as an electron selective layer on top of the fluorine doped tin oxide (FTO) electrode, minimizing material consumption. We find that the fullerene-modified FTO is a robust, chemically inert charge selective contact for perovskite based solar cells, which can reach 15% of stabilised power conversion efficiency in a flat junction device architecture using a scalable, low temperature, and reliable process. In contrast to TiO2, devices employing a molecularly thin functionalized fullerene layer show unaffected performance after 67 h of UV light exposure

Photoluminescence Intensity Enhancement in Tin Halide Perovskites

The prevalence of background hole doping in tin halide perovskites usually dominates their recombination dynamics. The addition of excess Sn halide source to the precursor solution is the most frequently used approach to reduce the hole doping and reveals photo-carrier dynamics related to defects activity. This study presents an experimental and theoretical investigation on defects under light irradiation in tin halide perovskites by combining measurements of photoluminescence with first principles computational modeling. It finds that tin perovskite thin films prepared with an excess of Sn halide sources exhibit an enhancement of the photoluminescence intensity over time under continuous excitation in inert atmosphere. The authors propose a model in which light irradiation promotes the annihilation of VSn2−/Sni2+ Frenkel pairs, reducing the deep carrier trapping centers associated with such defect and increasing the radiative recombination. Importantly, these observations can be traced in the open-circuit voltage dynamics of tin-based halide perovskite solar cells, implying the relevance of controlling the Sn photochemistry to stabilize tin perovskite devices

Effect of electronic doping and traps on carrier dynamics in tin halide perovskites

Tin halide perovskites have recently emerged as promising materials for low band gap solar cells. Much effort has been invested on controlling the limiting factors responsible for poor device efficiencies, namely self-p-doping and tin oxidation. Both phenomena are related to the presence of defects; however, full understanding of their implications in the optoelectronic properties of the material is still missing. We provide a comprehensive picture of the competing radiative and non-radiative recombination processes in tin-based perovskite thin films to establish the interplay between doping and trapping by combining photoluminescence measurements with trapped-carrier dynamic simulations and first-principles calculations. We show that pristine Sn perovskites, i.e. sample processed with commercially available SnI2 used as received, exhibit extremely high radiative efficiency due to electronic doping which boosts the radiative band-to-band recombination. Contrarily, thin films where Sn4+ species are intentionally introduced show drastically reduced radiative lifetime and efficiency due to a dominance of Auger recombination at all excitation densities when the material is highly doped. The introduction of SnF2 reduces the doping and passivates Sn4+ trap states but conversely introduces additional non-radiative decay channels in the bulk that fundamentally limit the radiative efficiency. Overall, we provide a qualitative model that takes into account different types of traps present in tin-perovskite thin films and show how doping and defects can affect the optoelectronic properties

Endometriosis classification, staging and reporting systems: a review on the road to a universally accepted endometriosis classification,

BACKGROUND: In the field of endometriosis, several classification, staging and reporting systems have been developed. However, endometriosis classification, staging and reporting systems that have been published and validated for use in clinical practice have not been systematically reviewed up to now. OBJECTIVES: The aim of the current review is to provide a historical overview of these different systems based on an assessment of published studies. MATERIALS AND METHODS: A systematic Pubmed literature search was performed. Data were extracted and summarised. RESULTS: Twenty-two endometriosis classification, staging and reporting systems have been published between 1973 and 2021, each developed for specific and different purposes. There is still no international agreement on how to describe the disease. Studies evaluating different systems are summarised showing a discrepancy between the intended and the evaluated purpose, and a general lack of validation data confirming a correlation with pain symptoms or quality of life for any of the current systems. A few studies confirm the value of the Enzian system for surgical description of deep endometriosis. With regards to infertility, the endometriosis fertility index has been confirmed valid for its intended purpose. CONCLUSIONS: Of the 22 endometriosis classification, staging and reporting systems identified in this historical overview, only a few have been evaluated, in 46 studies, for the purpose for which they were developed. It can be concluded that there is no international agreement on how to describe endometriosis or how to classify it, and that most classification/staging systems show no or very little correlation with patient outcomes. WHAT IS NEW? This overview of existing systems is a first step in working towards a universally accepted endometriosis classification

Role of microstructure in the electron–hole interaction of hybrid lead halide perovskites

Organic–inorganic metal halide perovskites have demonstrated high power conversion efficiencies in solar cells and promising performance in a wide range of optoelectronic devices. The existence and stability of bound electron–hole pairs in these materials and their role in the operation of devices with different architectures remains a controversial issue. Here we demonstrate, through a combination of optical spectroscopy and multiscale modelling as a function of the degree of polycrystallinity and temperature, that the electron–hole interaction is sensitive to the microstructure of the material. The long-range order is disrupted by polycrystalline disorder and the variations in electrostatic potential found for smaller crystals suppress exciton formation, while larger crystals of the same composition demonstrate an unambiguous excitonic state. We conclude that fabrication procedures and morphology strongly influence perovskite behaviour, with both free carrier and excitonic regimes possible, with strong implications for optoelectronic devices

Ultrafast THz probe of photo-induced polarons in lead-halide perovskites

We study the nature of photo-excited charge carriers in CsPbBr3 nanocrystal thin films by ultrafast optical pump - THz probe spectroscopy. We observe a deviation from a pure Drude dispersion of the THz dielectric response that is ascribed to the polaronic nature of carriers; a transient blueshift of observed phonon frequencies is indicative of the coupling between photogenerated charges and stretching-bending modes of the deformed inorganic sublattice, as confirmed by DFT calculations

New generation hole transporting materials for perovskite solar cells: amide-based small-molecules with nonconjugated backbones

State‐of‐the‐art perovskite‐based solar cells employ expensive, organic hole transporting materials (HTMs) such as Spiro‐OMeTAD that, in turn, limits the commercialization of this promising technology. Herein an HTM (EDOT‐Amide‐TPA) is reported in which a functional amide‐based backbone is introduced, which allows this material to be synthesized in a simple condensation reaction with an estimated cost of <$5 g−1. When employed in perovskite solar cells, EDOT‐Amide‐TPA demonstrates stabilized power conversion efficiencies up to 20.0% and reproducibly outperforms Spiro‐OMeTAD in direct comparisons. Time resolved microwave conductivity measurements indicate that the observed improvement originates from a faster hole injection rate from the perovskite to EDOT‐Amide‐TPA. Additionally, the devices exhibit an improved lifetime, which is assigned to the coordination of the amide bond to the Li‐additive, offering a novel strategy to hamper the migration of additives. It is shown that, despite the lack of a conjugated backbone, the amide‐based HTM can outperform state‐of‐the‐art HTMs at a fraction of the cost, thereby providing a novel set of design strategies to develop new, low‐cost HTMs

New generation hole transporting materials for perovskite solar cells: amide-based small-molecules with nonconjugated backbones

State‐of‐the‐art perovskite‐based solar cells employ expensive, organic hole transporting materials (HTMs) such as Spiro‐OMeTAD that, in turn, limits the commercialization of this promising technology. Herein an HTM (EDOT‐Amide‐TPA) is reported in which a functional amide‐based backbone is introduced, which allows this material to be synthesized in a simple condensation reaction with an estimated cost of <$5 g−1. When employed in perovskite solar cells, EDOT‐Amide‐TPA demonstrates stabilized power conversion efficiencies up to 20.0% and reproducibly outperforms Spiro‐OMeTAD in direct comparisons. Time resolved microwave conductivity measurements indicate that the observed improvement originates from a faster hole injection rate from the perovskite to EDOT‐Amide‐TPA. Additionally, the devices exhibit an improved lifetime, which is assigned to the coordination of the amide bond to the Li‐additive, offering a novel strategy to hamper the migration of additives. It is shown that, despite the lack of a conjugated backbone, the amide‐based HTM can outperform state‐of‐the‐art HTMs at a fraction of the cost, thereby providing a novel set of design strategies to develop new, low‐cost HTMs

Liquid biopsy in clear cell renal cell carcinoma. Urinary miR-210-3p as emerging specific biomarker

Themost common subtype of renal cell carcinoma (RCC) is clear cell RCC (ccRCC) that accounts for 70–80% of all renal malignancies. To date, no useful markers are available in clinical practice for early diagnosis and for optimal patient stratification. MicroRNAs, a class of small non-coding RNA, are emerging as promising molecules in the management of urological tumors suggesting the possibility of using them as non-invasive biomarkers. The aim of this study is to evaluate whether miR-210-3p may be an accurate non invasive diagnostic and prognostic biomarker for ccRCC patients

How Photogenerated I2 Induces I-Rich Phase Formation in Lead Mixed Halide Perovskites

Bandgap tunability of lead mixed halide perovskites (LMHPs) is a crucial characteristic for versatile optoelectronic applications. Nevertheless, LMHPs show the formation of iodide-rich (I-rich) phase under illumination, which destabilizes the semiconductor bandgap and impedes their exploitation. Here, it is shown that how I2 , photogenerated upon charge carrier trapping at iodine interstitials in LMHPs, can promote the formation of I-rich phase. I2 can react with bromide (Br- ) in the perovskite to form a trihalide ion I2 Br- (Iδ- -Iδ+ -Brδ- ), whose negatively charged iodide (Iδ- ) can further exchange with another lattice Br- to form the I-rich phase. Importantly, it is observed that the effectiveness of the process is dependent on the overall stability of the crystalline perovskite structure. Therefore, the bandgap instability in LMHPs is governed by two factors, i.e., the density of native defects leading to I2 production and the Br- binding strength within the crystalline unit. Eventually, this study provides rules for the design of chemical composition in LMHPs to reach their full potential for optoelectronic devices