27 research outputs found
The use of ultrasound transmission measurements for the assessment of properties of bone in normal and diseased states
SIGLEAvailable from British Library Document Supply Centre-DSC:DX190561 / BLDSC - British Library Document Supply CentreGBUnited Kingdo
An optical trigger source for hydrophone-based ultrasound measurement systems: a feasibility study
Ultrasound is routinely used in many medical applications. Concern for the safety of subjects undergoing investigations has led to the development of systems to quantify the acoustic output of such devices. One system, the NPL ultrasound beam calibrator, uses a multi-element hydrophone to determine rapidly the temporal and spatial characteristics of the acoustic output. When investigating pulsed systems it is necessary to synchronise data acquisition with the launch of the acoustic pulse, a procedure that currently can be both time consuming and difficult. This article examines the feasibility of using an alternative, optical approach, generating a trigger signal in response to the changes in refractive index associated with propagation of the acoustic pulse
Broadband ultrasonic attenuation: are current measurement techniques inherently inaccurate?
Measurements of broadband ultrasonic attenuation (BUA) are currently made using large aperture, piezoelectric transducers. The use of such a receiver is known to lead to the possibility of an overestimate of ultrasonic attenuation due to phase cancellation and it is shown theoretically that this same effect can also lead to an overestimate of BUA. Using a new scanning approach, BUA was measured using two methods, one sensitive to the phase of the acoustic wave, the other not. The phase sensitive BUA measurements were found to be of significantly higher value (p < 0.0001) than the phase insensitive measurements with a mean difference of 31.2 dB MHz-1. These findings are compatible with the hypothesis that BUA measurement systems with large aperture, piezo-electric receivers are inherently inaccurate
Effects of changes in packed cell volume on the specific heat capacity of blood: implications for studies measuring heat exchange in extracorporeal circuits
Extracorporeal circuits such as cardiopulmonary bypass (CPB) and renal dialysis machines cause active and/or passive loss of body heat. Attempts to quantify this heat loss are generally based on the Fick principle which requires knowledge of the specific heat capacity (SHC) of blood. As changes in packed cell volume are common, we investigated the effect of these changes on the SHC of blood over a range of packed cell volumes (PCV) from whole blood at 43.1% (3594 J kg-1 degrees C-1) to pure Hartmann's solution (4153 J kg-1 degrees C-1). The SHC of other fluids used during CPB was also measured and found to be 4139 J kg-1 degrees C-1 and 4082 J kg-1 degrees C-1 for normal saline and Gelofusine, respectively. The maximum variability in SHC over the range of PCV values encountered during CPB was calculated to be small (5.5%). We conclude that use of a constant value of SHC for calculation of thermal energy transfer is currently justified
Pharmacological vasodilatation improves efficiency of rewarming from hypothermic cardiopulmonary bypass
An afterdrop in core temperature after hypothermic cardiopulmonary bypass (CPB) is related to inadequate peripheral rewarming. We proposed that pharmacological vasodilatation during rewarming on bypass would improve peripheral rewarming and reduce the degree of afterdrop. Fifty-nine of 120 patients were randomized to receive a sodium nitroprusside (SNP) infusion during the rewarming stage of hypothermic CPB. Mean systemic vascular resistance (SVR) during the rewarming phase of CPB was 1129 dyne s-1 cm-5 in the control group and 768 dyne s-1 m-5 in the SNP group (P < or = 0.001). Patients receiving SNP rewarmed to 37.0 degrees C faster (299 min vs 376 min; P = 0.003) and were extubated earlier (490 min vs 621 min; P = 0.001). Patients receiving SNP had a warmer mean peripheral temperature (MPT) (32.9 degrees C vs 32.4 degrees C; P = 0.05) on termination of CPB. Postoperative core temperature fell less in the SNP group (35.6 degrees C vs 35.2 degrees C; P = 0.01) as did MPT (31.8 degrees C vs 31.2 degrees C; P = 0.004). SNP-induced vasodilatation during rewarming from hypothermic CPB improves peripheral rewarming, reduces the degree of postoperative core and peripheral hypothermia and reduces time to extubation
Are European Resuscitation Council recommendations for paddle force achievable during defibrillation?
Transthoracic impedance (TTI) is an important determinant of success in defibrillation. Low TTI increases transmyocardial current and therefore increases the chance of depolarising a critical mass of myocardium. A major component of TTI occurs at the paddle-skin interface and is minimised by pressure applied to the defibrillation paddles. The International Liaison Committee on Resuscitation (ILCOR) 2000 guidelines recommend that 'firm force' should be applied to both paddles, whereas previous European Resuscitation Council (ERC) 1992 guidelines were more precise, recommending that 12 kg of force should to be applied. We assessed whether defibrillator operators are capable of achieving 12 kg paddle force. Fifty advanced life support-trained doctors and nurses attempted to achieve 12 kg paddle force while simulating defibrillation on a resuscitation doll. The median value of the maximum pressures obtainable was 10.1 (max 16.0; min 5.0) kg force. Only 14% could achieve > or =12 kg force on both paddles for defibrillation. Men achieved more force than women (10.7 vs. 8.1 kg force; P<0.01), and there was a correlation between maximum force achieved and operator height (r2=0.27) and dominant hand-grip strength (r2=0.34). The ERC recommendation of 12 kg paddle force is not achievable by the majority of defibrillator operators
Bone structure after removal of internal fixation plates
We used single-photon absorptiometry to assess the forearm bones after the removal of internal fixation plates in 14 patients. We found convincing evidence of cortical atrophy in only one patient, in whom the plates had been removed prematurely after only 16 months. It is suggested that such plates should be retained for at least 21 months, to allow bone density to return to its prefracture level. The recommendations of the AO/ASIF group are supported
How often should defibrillation pads be changed?: the effect of evaporative drying
Objective: In order to minimise transthoracic impedance (TTI) during defibrillation, water-based pads are used to improve conductivity between metal defibrillation paddles and skin. Subjectively, these pads appear to dry very quickly; an effect that may lead to an increase in TTI due to poorer conduction between paddles and skin. This study was carried out to assess the effect of evaporative drying of defibrillation pads on TTI. Materials and methods: TTI was measured at 5–10 min intervals in 20 adult male volunteers across 3M defibrillation pads (2346N) placed in the anterior–apical position. Measurements of TTI were made at 30 kHz using a Bodystat® MultiScan 5000 monitor at end-expiration. A third pad was placed on the left precordium and its mass recorded each time a TTI measurement was made. Results: The median age of subjects was 22 years (range 21–52 years) and their median body mass index was 23.1 kg m?2 (range 18.4–42.8 kg m?2). Median room temperature was 23.0°C (range 19.0–24.0°C) and the median humidity was 31.0% (range 28.0–48.0%). 3M defibrillation pads had an initial mean mass of 25.14 g (S.D.±0.41 g). Changes in defibrillation pad mass due to evaporative loss occurred immediately and rapidly, with all measurements being significantly lower than the baseline value. Mean baseline TTI was 63.6 ? (S.D.±13.7 ?). After 30 min a statistically significant (P=0.012) rise of 1.4 ? (2.2%), was observed corresponding to a 12.6% decrease in pad mass, after which TTI continued to increase in a linear fashion. Conclusion: In the absence of a defibrillation current, 3M defibrillation pads can safely be left on the chest wall for at least 25 min in a typical hospital environment before evaporative drying results in a significant increase in transthoracic impedance