600 research outputs found

    Waterborne GPR survey for estimating bottom-sediment variability: A survey on the Po River, Turin, Italy

    Get PDF
    We conducted an integrated geophysical survey on a stretch of the river Po in order to check the GPR ability to discriminate the variability of riverbed sediments through an analysis of the bottom reflection amplitudes. We conducted continuous profiles with a 200-MHzGPR system and a handheld broadband EM sensor.Aconductivity meter and a TDR provided punctual measurements of water conductivity, permittivity, and temperature. The processing and interpretation of the GEM-2 and GPR data were enhanced by reciprocal results and by integration with the punctual measurements of the EM properties of the water. We used a processing flow that improved the radargram images and preserved the amplitude ratios among the different profiles and the frequency content at the bottom reflection signal.We derived the water attenuation coefficient both from the punctual measurements using the Maxwell formulas and from the interpretation of the GPR data, finding an optimal matching between the two values. The GPR measurements provided maps of the bathymetry and of the bottom reflection amplitude. The high reflectivity of the riverbed, derived from the GPR interpretation, agreed with the results of the direct sampling campaign that followed the geophysical survey. The variability of the bottom-reflection-amplitudes map, which was not confirmed by the direct sampling, could also have been caused by scattering phenomena due to the riverbed clasts which are dimensionally comparable to the wavelength of the radar pulse

    CoSMed: a confidentiality-verified social media platform

    Get PDF
    This paper describes progress with our agenda of formal verification of information flow security for realistic systems. We present CoSMed, a social media platform with verified document confidentiality. The system’s kernel is implemented and verified in the proof assistant Isabelle/HOL. For verification, we employ the framework of Bounded-De- ducibility (BD) Security, previously introduced for the conference system CoCon. CoSMed is a second major case study in this framework. For CoSMed, the static topology of declas- sification bounds and triggers that characterized previous instances of BD Security has to give way to a dynamic integration of the triggers as part of the bounds. We also show that, from a theoretical viewpoint, the removal of triggers from the notion of BD Security does not restrict its expressiveness

    CoSMeDis: a distributed social media platform with formally verified confidentiality guarantees

    Get PDF
    We present the design, implementation and information flow verification of CoSMeDis, a distributed social media platform. The system consists of an arbitrary number of communicating nodes, deployable at different locations over the Internet. Its registered users can post content and establish intra-node and inter-node friendships, used to regulate access control over the posts. The system’s kernel has been verified in the proof assistant Isabelle/HOL and automatically extracted as Scala code. We formalized a framework for composing a class of information flow security guarantees in a distributed system, applicable to input/output automata. We instantiated this framework to confidentiality properties for CoSMeDis’s sources of information: posts, friendship requests, and friendship status

    CoSMed: a confidentiality-verified social media platform

    Get PDF
    This paper describes progress with our agenda of formal verification of information-flow security for realistic systems. We present CoSMed, a social media platform with verified document confidentiality. The system’s kernel is implemented and verified in the proof assistant Isabelle/HOL. For verification, we employ the framework of Bounded-Deducibility (BD) Security, previously introduced for the conference system CoCon. CoSMed is a second major case study in this framework. For CoSMed, the static topology of declassification bounds and triggers that characterized previous instances of BD security has to give way to a dynamic integration of the triggers as part of the bound

    Effect of cyclic loading on hydrogen diffusion in low carbon steels

    Get PDF
    Carbon steels or low-alloyed steels may be affected by damaging phenomena due to Hydrogen Embrittlement (HE), which is a particular form of Environmental Assisted Cracking (EAC). The insurgence of HE depends on the intrinsic susceptibility of the steel, the applied stress, and the concentration of hydrogen inside the metal. It occurs by a mechanism of absorption and subsequent diffusion of atomic hydrogen through the metal lattice. On steels with a yield strength lower than 700 MPa, HE occurs in the plastic deformation field, in the presence of dynamic loading at slow strain rates or cyclic fatigue loading at very low frequencies. Although several important studies were carried out on the effect of loading conditions on hydrogen diffusion into the metal and HE mechanism, HE phenomena are not fully understood. In this work, the effect of the application of cyclic loads on hydrogen diffusion parameters was studied both in the elastic and in the plastic deformation field. The influence of mean load and amplitude was analyzed. Hydrogen permeation tests were performed on API 5L X65 steel, in accordance with ISO 17081:2014. The specimen behaved as bi-electrode between the two compartments of a Devanathan-Stachurski cell. The anodic side of the specimen was polarized at +340 mV vs Ag/AgCl in a 0.1 M NaOH aerated solution, while the cathodic compartment was filled with an aerated borate solution. A controller enabled temperature adjustment at 20±0.5°C. Once the passivity current registered in the anodic side reached values of 0.05 µA/cm2, a cathodic current density of 0.50 mA/cm2 was applied to charging cathodic side. The study included tests with sine waveform cycling loading, with a maximum level equal to 110% TYS, at a frequency of 10-2 Hz. The results confirmed the values of hydrogen diffusion coefficient usually indicated for low-alloyed steels with a sorbitic microstructure. Strain hardened specimens - stretched above yield strength - showed an increase of steady state current and an extension of the time lag, denoting a slight decrease in the apparent hydrogen diffusion coefficient due to traps effect in the cold deformed steel matrix. Under cyclic loading, an instantaneous peak of current with a subsequent significant transient decrease occurred after cyclic load application, whereas no relevant variation of permeation curve compared to unloaded specimens was observed if specimens were already loaded before hydrogen charging. The instantaneous current peak reached values much higher than the steady state current. This is ascribed to the rupture of the passive film – caused by loading – and its subsequent reformation; in fact, this can also be noted during tests performed on specimens without hydrogen permeation. The following transient, in which the permeation current decreases below the steady state and then returns to it, denotes a relevant trapping effect that causes the instantaneous reduction of mobile hydrogen concentration in the lattice. This becomes more significant for loads closer and closer to the yield strength, mainly beyond this, and can only be noted at the first loading step. Subsequent unloading and loading step at the same mean value showed no transient in the permeation curren

    Author Reply to: Whither the Bicarbonate Era

    Get PDF

    Respiratory drive in the acute respiratory distress syndrome: pathophysiology, monitoring, and therapeutic interventions

    Get PDF
    Neural respiratory drive, i.e., the activity of respiratory centres controlling breathing, is an overlooked physiologic variable which affects the pathophysiology and the clinical outcome of acute respiratory distress syndrome (ARDS). Spontaneous breathing may offer multiple physiologic benefits in these patients, including decreased need for sedation, preserved diaphragm activity and improved cardiovascular function. However, excessive effort to breathe due to high respiratory drive may lead to patient self-inflicted lung injury (P-SILI), even in the absence of mechanical ventilation. In the present review, we focus on the physiological and clinical implications of control of respiratory drive in ARDS patients. We summarize the main determinants of neural respiratory drive and the mechanisms involved in its potentiation, in health and ARDS. We also describe potential and pitfalls of the available bedside methods for drive assessment and explore classical and more \u201cfuturistic\u201d interventions to control drive in ARDS patients

    Effects of inspiratory flow on lung stress, pendelluft, and ventilation heterogeneity in ARDS: A physiological study

    Get PDF
    Background: High inspiratory flow might damage the lungs by mechanisms not fully understood yet. We hypothesized that increasing inspiratory flow would increase lung stress, ventilation heterogeneity, and pendelluft in ARDS patients undergoing volume-controlled ventilation with constant tidal volume and that higher PEEP levels would reduce this phenomenon. Methods: Ten ARDS patients were studied during protective volume-controlled ventilation. Three inspiratory flows (400, 800, and 1200 ml/s) and two PEEP levels (5 and 15 cmH2O) were applied in random order to each patient. Airway and esophageal pressures were recorded, end-inspiratory and end-expiratory holds were performed, and ventilation distribution was measured with electrical impedance tomography. Peak and plateau airway and transpulmonary pressures were recorded, together with the airway and transpulmonary pressure corresponding to the first point of zero end-inspiratory flow (P1). Ventilation heterogeneity was measured by the EIT-based global inhomogeneity (GI) index. Pendelluft was measured as the absolute difference between pixel-level inflation measured at plateau pressure minus P1. Results: Plateau airway and transpulmonary pressure was not affected by inspiratory flow, while P1 increased at increasing inspiratory flow. The difference between P1 and plateau pressure was higher at higher flows at both PEEP levels (p < 0.001). While higher PEEP reduced heterogeneity of ventilation, higher inspiratory flow increased GI (p = 0.05), irrespective of the PEEP level. Finally, gas volume undergoing pendelluft was larger at higher inspiratory flow (p < 0.001), while PEEP had no effect. Conclusions: The present exploratory analysis suggests that higher inspiratory flow increases additional inspiratory pressure, heterogeneity of ventilation, and pendelluft while PEEP has negligible effects on these flow-dependent phenomena. The clinical significance of these findings needs to be further clarified
    corecore