Hybrid Model Representation of a TLP Including Flexible Topsides in Non-Linear Regular Waves

The rising demand for renewable energy solutions is forcing the established industries to expand and continue evolving. For the wind energy sector, the vast resources in deep sea locations have encouraged research towards the installation of turbines in deeper waters. One of the most promising technologies able to solve this challenge is the floating wind turbine foundation. For the ultimate limit state, where higher order wave loads have a significant influence, a design tool that couples non-linear excitations with structural dynamics is required. To properly describe the behavior of such a structure, a numerical model is proposed and validated by physical test results. The model is applied to a case study of a tension leg platform with a flexible topside mimicking the tower and a lumped mass mimicking the rotor-nacelle assembly. The model is additionally compared to current commercial software, where the need for the coupled higher order dynamics proposed in this paper becomes evident

Mesoscopic modeling of the impact behavior and fragmentation of porous concrete

This study presents the numerical analyses conducted to investigate the impact behavior of different porous concretes, which have also been cast and tested experimentally. For a realistic representation of the real porous concretes containing arbitrary shaped air pores, a mesh generation code was developed in which the aggregates in the mixtures were directly extracted through computed tomography. In the code, mineralogically different aggregates in porous concretes with gravel could also be individually defined. In the explicit finite element analyses conducted, porous concrete was considered as a four-phase material, consisting of aggregates, interfacial transition zones (ITZ), bulk cement paste and air. The pore size distribution and the fragmentation behavior of the concretes were also numerically analyzed. Among the parameters that have been investigated both numerically and experimentally, aggregate grading, which determines the porosity and pore size distribution of the material, was found to have a dominant effect on the strength as well as the fragmentation properties of porous concretes. Although the amount of ITZ is higher in mixtures containing finer aggregates, those mixtures had higher impact strengths compared to coarser aggregate ones again owing to their much finer pore structures.</p

Mesoscopic modeling of the impact behavior and fragmentation of porous concrete

This study presents the numerical analyses conducted to investigate the impact behavior of different porous concretes, which have also been cast and tested experimentally. For a realistic representation of the real porous concretes containing arbitrary shaped air pores, a mesh generation code was developed in which the aggregates in the mixtures were directly extracted through computed tomography. In the code, mineralogically different aggregates in porous concretes with gravel could also be individually defined. In the explicit finite element analyses conducted, porous concrete was considered as a four-phase material, consisting of aggregates, interfacial transition zones (ITZ), bulk cement paste and air. The pore size distribution and the fragmentation behavior of the concretes were also numerically analyzed. Among the parameters that have been investigated both numerically and experimentally, aggregate grading, which determines the porosity and pore size distribution of the material, was found to have a dominant effect on the strength as well as the fragmentation properties of porous concretes. Although the amount of ITZ is higher in mixtures containing finer aggregates, those mixtures had higher impact strengths compared to coarser aggregate ones again owing to their much finer pore structures.Accepted Author ManuscriptApplied MechanicsMaterials and Environmen

Data for: Mesoscopic Modeling of the Impact Behavior and Fragmentation of Porous Concrete

In this work, real porous concrete mixtures, which have been experimentally produced and tested, were analyzed numerically. The numerical output was also compared with experimental results