74 research outputs found

    QUAM, Projecte en procés

    Full text link
    Article sobre la història de la QUAM. Quinzena d'Art de Montesquiu. Un projecte pioner en la formació de l'art contemporani a Catalunya

    Dispositivos Post-. Prácticas artísticas y redes de acción ciudadana en contextos post-crisis

    Get PDF
    Esta publicación está vinculada en parte al proyecto Dispositivos Post- impulsado por Idensitat en colaboración con el colectivo de ciudadanos Recreant Cruïlles y la Fundación Antoni Tàpies, que entre 2012 y 2014 impulsó diversas intervenciones artísticas en la zona contigua al Espai Germanetes. Un solar vacío en medio del barrio del Eixample Esquerra de Barcelona que, desde noviembre de 2013, gestiona Recreant Cruïlles de manera asamblearia y abierta a la ciudad. Dispositivos Post- fue el proyecto que articuló un proceso de colaboración entre Idensitat y Recreant Cruïlles, y que en todo este trayecto fue incorporando la participación de diversos agentes, artistas, investigadores y activistas

    A Demonstration of Spectral and Spatial Interferometry at THz Frequencies

    Full text link
    A laboratory prototype spectral/spatial interferometer has been constructed to demonstrate the feasibility of the double Fourier technique at Far Infrared (FIR) wavelengths (0.15 - 1 THz). It is planned to use this demonstrator to investigate and validate important design features and data processing methods for future astronomical FIR interferometer instruments. In building this prototype we have had to address several key technologies to provide an end-end system demonstration of this double Fourier interferometer. We report on the first results taken when viewing single slit and double slit sources at the focus of a large collimator used to simulate real sources at infinity. The performance of the prototype instrument for these specific field geometries is analyzed to compare with the observed interferometric fringes and to demonstrate image reconstruction capabilities.Comment: Accepted for publication in Applied Optic

    La producción artística basada en procesos que cohabitan temporalmente los contextos

    Full text link
    En el origen del concepto «residencia» o «programa de residencias» está el objetivo de facilitar la movilidad de los creadores, ofrecer un espacio y un tiempo para investigar, producir, crear o intensificar las conexiones entre organizaciones de diferentes territorios, y poner en relación los procesos de trabajo con el lugar, contexto u organización que acoge la experiencia donde se desarrolla el programa. El crecimiento de los programas de residencia va en paralelo a una transición de su propia razón de ser. De entender su labor como facilitadora de un espacio-tiempo de aislamiento creativo, hacia la configuración de un espacio que active la interacción social con el contexto. En este texto se analiza el rol de las residencias artísticas en cuanto que catalizadoras para impulsar cambios en la trayectoria y la práctica artística, como estructuras que aportan nuevas formas de investigación, producción y distribución en el ecosistema artístico, y de manera más remarcable, en su incidencia sobre el contexto desde una perspectiva política, social y cultural. Se trata de un artículo, escrito en tiempos de distanciamiento social, que recoge la necesidad de redefinir el papel que pueden asumir las residencias, de manera especial cuando sus objetivos pasan por desplegar programas que interactúen con diferentes aspectos de lo social, o cuando la presencialidad y la movilidad dificultan su desarrollo, y la virtualidad aparece como solución a los miedos de la presencialidad. La metodología empleada incorpora reflexiones derivadas del congreso ADD+ART que convocó proyectos que abordaban la producción artística ante el nuevo paradigma relacionado con la (in)movilidad, (no) presencialidad e interacción social, y con un análisis del papel que asumen diferentes residencias artísticas a partir de agentes implicados en ellas, con la consideración de los casos de Idensitat, Milne y Carreño-Muñoz

    Multimode simulations of a wide field of view double-Fourier far-infrared spatio-spectral interferometer

    Get PDF
    In the absence of 50-m class space-based observatories, subarcsecond astronomy spanning the full far-infrared wavelength range will require space-based long-baseline interferometry. The long baselines of up to tens of meters are necessary to achieve subarcsecond resolution demanded by science goals. Also, practical observing times command a field of view toward an arcminute (1′) or so, not achievable with a single on-axis coherent detector. This paper is concerned with an application of an end-to-end instrument simulator PyFIInS, developed as part of the FISICA project under funding from the European Commission’s seventh Framework Programme for Research and Technological Development (FP7). Predicted results of wide field of view spatio–spectral interferometry through simulations of a long-baseline, double-Fourier, far-infrared interferometer concept are presented and analyzed. It is shown how such an interferometer, illuminated by a multimode detector can recover a large field of view at subarcsecond angular resolution, resulting in similar image quality as that achieved by illuminating the system with an array of coherent detectors. Through careful analysis, the importance of accounting for the correct number of higher-order optical modes is demonstrated, as well as accounting for both orthogonal polarizations. Given that it is very difficult to manufacture waveguide and feed structures at sub-mm wavelengths, the larger multimode design is recommended over the array of smaller single mode detectors. A brief note is provided in the conclusion of this paper addressing a more elegant solution to modeling far-infrared interferometers, which holds promise for improving the computational efficiency of the simulations presented here

    The Wide-Field Spatio-Spectral Interferometer: System Overview, Data Synthesis and Analysis

    Get PDF
    The Wide-field Imaging Interferometry Testbed (WIIT) is a double Fourier (DF) interferometer operating at optical wavelengths, and provides data that are highly representative of those from a space-based far-infrared interferometer like SPIRIT. We have used the testbed to observe both geometrically simple and astronomically representative test scenes. Here we present an overview of the astronomical importance of high angular resolution at the far infrared, followed by the description of the optical set-up of WIIT, including the source simulator CHIP (Calibrated Hyperspectral Image Projector). We describe our synthesis algorithms used in the reconstruction of the input test scenes via a simulation of the most recent measurements. The updated algorithms, which include instruments artifacts that allow the synthesis of DF experimental data, are presented and the most recent results analyzed

    Quasi-optical analysis of a far-infrared spatio-spectral space interferometer concept

    Get PDF
    FISICA (Far-Infrared Space Interferometer Critical Assessment) was a three year study of a far-infrared spatio-spectral double-Fourier interferometer concept. One of the aims of the FISICA study was to set-out a baseline optical design for such a system, and to use a model of the system to simulate realistic telescope beams for use with an end-to-end instrument simulator. This paper describes a two-telescope (and hub) baseline optical design that fulfils the requirements of the FISICA science case, while minimising the optical mass of the system. A number of different modelling techniques were required for the analysis: fast approximate simulation tools such as ray tracing and Gaussian beam methods were employed for initial analysis, with GRASP physical optics used for higher accuracy in the final analysis. Results are shown for the predicted far-field patterns of the telescope primary mirrors under illumination by smooth walled rectangular feed horns. Far-field patterns for both on-axis and off-axis detectors are presented and discussed

    The Balloon Experimental Twin Telescope for Infrared Interferometry (BETTII): First Flight

    Get PDF
    The Balloon Experimental Twin Telescope for Infrared Interferometry (BETTII) is an 8-meter far-infrared (30-100 m) double-Fourier Michelson interferometer designed to fly on a high altitude scientific balloon. The project began in 2011, and the payload was declared ready for flight in September 2016. Due to bad weather, the first flight was postponed until June 2017; BETTII was successfully launched on June 8, 2017 for an engineering flight. Over the course of the one night flight, BETTII acquired a large amount of technical data that we are using to characterize the payload. Unfortunately, the flight ended with an anomaly that resulted in destruction of the payload. In this paper, we will discuss the path to BETTII flight, the results of the first flight, and some of the plans for the future

    Optical and Quasi-Optical Analysis of System Components for a Far-Infrared Space Interferometer

    Get PDF
    Many important astrophysical processes occur at wavelengths that fall within the far-infrared band of the EM spectrum, and over distance scales that require sub-arc second spatial resolution. It is clear that in order to achieve sub-arc second resolution at these relatively long wavelengths (compared to optical/near-IR), which are strongly absorbed by the atmosphere, a space-based far-IR interferometer will be required. We present analysis of the optical system for a proposed spatial-spectral interferometer, discussing the challenges that arise when designing such a system and the simulation techniques employed that aim to resolve these issues. Many of these specific challenges relate to combining the beams from multiple telescopes where the wavelengths involved are relatively short (compared to radio interferometry), meaning that care must be taken with mirror surface quality, where surface form errors not only present potential degradation of the single system beams, but also serve to reduce fringe visibility when multiple telescope beams are combined. Also, the long baselines required for sub-arc second resolution present challenges when considering propagation of the relatively long wavelengths of the signal beam, where beam divergence becomes significant if the beam demagnification of the telescopes is not carefully considered. Furthermore, detection of the extremely weak far-IR signals demands ultra-sensitive detectors and instruments capable of operating at maximum efficiency. Thus, as will be shown, care must be taken when designing each component of such a complex quasioptical system

    Fano resonances in plasmonic core-shell particles and the Purcell effect

    Full text link
    Despite a long history, light scattering by particles with size comparable with the light wavelength still unveils surprising optical phenomena, and many of them are related to the Fano effect. Originally described in the context of atomic physics, the Fano resonance in light scattering arises from the interference between a narrow subradiant mode and a spectrally broad radiation line. Here, we present an overview of Fano resonances in coated spherical scatterers within the framework of the Lorenz-Mie theory. We briefly introduce the concept of conventional and unconventional Fano resonances in light scattering. These resonances are associated with the interference between electromagnetic modes excited in the particle with different or the same multipole moment, respectively. In addition, we investigate the modification of the spontaneous-emission rate of an optical emitter at the presence of a plasmonic nanoshell. This modification of decay rate due to electromagnetic environment is referred to as the Purcell effect. We analytically show that the Purcell factor related to a dipole emitter oriented orthogonal or tangential to the spherical surface can exhibit Fano or Lorentzian line shapes in the near field, respectively.Comment: 28 pages, 10 figures; invited book chapter to appear in "Fano Resonances in Optics and Microwaves: Physics and Application", Springer Series in Optical Sciences (2018), edited by E. O. Kamenetskii, A. Sadreev, and A. Miroshnichenk
    corecore