DEVELOPMENT OPTIMIZATION AND EVALUATION OF EFFERVESCENT TABLETS OF CHLORPHENIRAMINE MALEATE USING BOX BEHNKEN DESIGN

Objective: The objective of present study was to develop effervescent tablets of Chlorpheniramine maleate (CPM) for the treatment of dysphasia.Methods: Effervescent tablets were prepared by direct compression method and were optimized using box behnken design. Amount to sodium bicarbonate (X1), amount of tartaric acid (X2) and amount of fumaric acid (X3) were selected as independent variables, whereas disintegration time (Y1), amount of carbon dioxide (Y2) and drug release in 5 minutes (Y3) were selected as dependent variables. All the batches were also evaluated for general post compression evaluation of tablet such as-weight variation, thickness, friability and hardness. From the results of design batches, best batch was selected and evaluated for in vivo pharmacokinetic study in rabbit model.Results: The disintegration time ranged from 103.33 ± 0.24 sec to 157.00 ± 0.75 sec while amount of carbon dioxide ranged from 0.26±0.014 g to 2.03±0.056 g in all the design batches. From the results of design batches, batch B4 was selected as optimized batch due to higher amount of released carbon dioxide and faster drug release as compared to other batches. Batch B4 was showing higher AUC and Cmax while lower tmax as compared to drug suspension while performing in vivo study of optimized batch in rabbit model.Conclusion: The study concluded that the combination of sodium bicarbonate, tartaric acid and fumaric acid approach for development of effervescent tablet aids to achieve faster disintegration and faster drug release property for CPM.Â

Isolation and Characterization of Bacterial Endophytes from Lycopersicon esculentum Plant and their Plant Growth Promoting Characteristics

The study was designed to isolate and characterize bacterial endophytes from root and stem of Lycopersicon esculentum plant which was collected form different region of Gujarat. Total 18 isolates of endophytic bacteria were selected in which, all the endophytic bacteria produced one or the other different characteristics involved in plant growth promotion. They either produced phytohormones like indole acetic acid, siderophore, protease, pectinase, organic acid showed antifungal activity, chromium tolerance and solubilized phosphate. Four of the strains among the 18 showed maximum positive results of plant growth promoting regulators (PGPR) test and among them best probable isolate was selected and thus its 16SrDNA was amplified and sequenced. Only HR7 endophyte of tomato turned out to be Pseudomonas aeruginosa. It’s a gram negative coccobacili, sporeforming motile bacilli and show maximum PGPR activity. The results of our present studies indicated that above strains might be endophytic and therefore, were associated with the plant growth. Keywords: Lycopersicon esculentum; endophytic bacteria; PGPR; IAA; 16SrDNA DOI: http://dx.doi.org/10.3126/njb.v2i1.5679   Nepal Journal of Biotechnology Jan.2012, Vol.2(1): 37-5

Priorities and preferences for school-based mental health services in India: a multi-stakeholder study with adolescents, parents, school staff and mental health providers

Background Schools are important settings for increasing reach and uptake of adolescent mental health interventions. There is limited consensus on the focus and content of school-based mental health services (SBMHSs), particularly in low-resource settings. This study elicited the views of diverse stakeholders in two urban settings in India about their priorities and preferences for SBMHSs. Methods We completed semi-structured interviews and focus group discussions with adolescents (n=191), parents (n=9), teachers (n=78), school counsellors (n=15), clinical psychologists and psychiatrists (n=7). Qualitative data were obtained on prioritized outcomes, preferred content and delivery methods, and indicated barriers. Results All stakeholders indicated the need for and acceptability of SBMHSs. Adolescents prioritized resolution of life problems and preferred practical guidance. Parents and teachers emphasized functional outcomes and preferred to be involved in interventions. This contrasted with adolescents’ preferences for limited involvement from parents and teachers, to maintain confidentiality. Face-to-face counselling was the most acceptable delivery format; self-help was less frequently recommended but was more acceptable when blended with guidance or delivered as digital interventions. Structured sensitization was recommended to ensure adolescent engagement. Providers endorsed a stepped care approach to address different levels of mental health need among adolescents. Conclusion SBMHSs are desired by adolescents and adult stakeholders in this setting where few such services exist. Sensitization activities are required to support implementation. School counsellors have an important role in identifying and treating adolescents with different levels of mental health need, and a suite of interventions are needed to target these needs effectively and efficiently

A clinical pathway for the postoperative management of hypocalcemia after pediatric thyroidectomy reduces blood draws

Objectives Postoperative calcium management is challenging following pediatric thyroidectomy given potential limitations in self-reporting symptoms and compliance with phlebotomy. A protocol was created at our tertiary children's institution utilizing intraoperative parathyroid hormone (PTH) levels to guide electrolyte management during hospitalization. The objective of this study was to determine the effect of a new thyroidectomy postoperative management protocol on two primary outcomes: (1) the number of postoperative calcium blood draws and (2) the length of hospital stay. Study design Institutional review board approved retrospective study (2010–2016). Methods Consecutive pediatric total thyroidectomy and completion thyroidectomy ± neck dissection cases from 1/1/2010 through 8/5/2016 at a single tertiary children's institution were retrospectively reviewed before and after initiation of a new management protocol. All cases after 2/1/2014 comprised the experimental group (post-protocol implementation). The pre-protocol control group consisted of cases prior to 2/1/2014. Multivariable linear and Poisson regression models were used to compare the control and experimental groups for outcome measure of number of calcium lab draws and hospital length of stay. Results 53 patients were included (n = 23, control group; n = 30 experimental group). The median age was 15 years. 41 patients (77.4%) were female. Postoperative calcium draws decreased from a mean of 5.2 to 3.6 per day post-protocol implementation (Rate Ratio = 0.70, p < .001), adjusting for covariates. The mean number of total inpatient calcium draws before protocol initiation was 13.3 (±13.20) compared to 7.2 (±4.25) in the post-protocol implementation group. Length of stay was 2.1 days in the control group and 1.8 days post-protocol implementation (p = .29). Patients who underwent concurrent neck dissection had a longer mean length of stay of 2.32 days compared to 1.66 days in those patients who did not undergo a neck dissection (p = .02). Hypocalcemia was also associated with a longer mean length of stay of 2.41 days compared to 1.60 days in patients who did not develop hypocalcemia (p < .01). Conclusions The number of calcium blood draws was significantly reduced after introduction of a standardized protocol based on intraoperative PTH levels. The hospital length of stay did not change. Adoption of a standardized postoperative protocol based on intraoperative PTH levels may reduce the number of blood draws in children undergoing thyroidectomy

Model of LPG Refrigerator: A Literature Review

This work investigates the result of an experimental study carried out to determine the Coefficient of performance of domestic refrigerator when a propane-butane mixture is liquefied petroleum gas (LPG) which is available and comprises 56.4% butane, 24.4%propane, and 17.2% isobutene. This paper also presented an experimental investigation of COP by the effect of changing capillary tube length, capillary tube inner diameter and capillary coil diameter on the mass flow rate of refrigerant in an adiabatic helical capillary tube. Large amount of electricity supply is not available easily in large part of underdevelopment country like India. It will also prove to be an effective for remote area such as research sites, mines, & deserts where electricity is generally not available. The LPG is cheaper and possesses an environmental free in nature with no ozone depletion potential (ODP). Also LPG is available as a side product in local refineries. The results of the present work indicate the successful use of this propane-butane mixture as an alternative refrigerant to CFCs and HFCs in domestic refrigerator. It would include Experimental setup of working model and detailed observation of the LPG refrigerator and represents its application in refinery, hotel, chemical industries where requirement of LPG is more. Keywords: LPG refrigerator, domestic refrigerator, eco friendly refrigerants, Mixed Refrigerant

Preparation and antimicrobial activity of 3-(p-(2', 5'-dibromobenzenesulphonamido)-phenyl)-5-aryl-l H/acetyl/phenyl-2-pyrazolines

630-63

Synthesis of some novel cyanopyridines and isoxazoles bearing sulphonamide moiety and their antimicrobial activity

822-82

A hospital based retrospective study of thyroid disorders on obstetric and perinatal outcomes

Background: The study was undertaken in pregnant women to understand and analyze the obstetric and foetal outcomes of thyroid disorders.Methods: TSH estimation was used as universal screening in their first visit to our hospital. Those patients with abnormal TSH values, i.e. above 2.5 mIU/ml in first trimester and above 3 mIU/ml in second and third trimesters were evaluated for free T3, free T4 and TPO Abs. They were treated accordingly and dosage adjustments made and the tests repeated once in 4-6 weeks. They were followed throughout pregnancy and delivery.Results: Total no of pregnant women screened were 904 over a period of 1 year from 15 March 2019 to 14 March 2020, of which 115 had abnormal thyroid functions, thereby the prevalence of thyroid disorders being 12.72%. Of the 115 patients with thyroid disorders, 112 were hypothyroid and 3 were hyperthyroid. Among the 112 hypothyroid cases, 48 were known cases and 64 were new cases. The total cases of subclinical hypothyroidism were 88, prevalence being 9.73% and overt cases were 24, prevalence being 2.65%; 3 cases were overt hyperthyroid, prevalence being 0.33%. 66% of subclinical hypothyroidism were TPO positive and 34% of overt hypothyroidism were TPO positive (p<0.05). Out of 115 abnormal thyroid function patients, 92 patients delivered in our hospital. There were 15 abortions, 13 spontaneous and 2 terminations of pregnancies; 7 patients have delivered outside and 1 patient lost follow up.Conclusions: The prevalence of thyroid disorders during pregnancy was significantly more in our study, hypothyroidism being the commonest. Significant numbers of cases were newly diagnosed on universal screening. The commonest disorder was subclinical hypothyroidism. Adverse maternal and foetal outcomes were almost similar in both subclinical and overt hypothyroidism. The common adverse outcomes noted were abortions, pre-eclampsia, gestational diabetes mellitus, preterm births and increased rates of caesarean sections. The adverse outcomes were significantly more in autoimmune antibody positive patients

Invasive meningococcal disease in patients with complement deficiencies: a case series (2008-2017).

BACKGROUND: To describe patients with inherited and acquired complement deficiency who developed invasive meningococcal disease (IMD) in England over the last decade. METHODS: Public Health England conducts enhanced surveillance of IMD in England. We retrospectively identified patients with complement deficiency who developed IMD in England during 2008-2017 and retrieved information on their clinical presentation, vaccination status, medication history, recurrence of infection and outcomes, as well as characteristics of the infecting meningococcal strain. RESULTS: A total of 16 patients with 20 IMD episodes were identified, including four with two episodes. Six patients had inherited complement deficiencies, two had immune-mediated conditions associated with complement deficiency (glomerulonephritis and vasculitis), and eight others were on Eculizumab therapy, five for paroxysmal nocturnal haemoglobinuria and three for atypical haemolytic uraemic syndrome. Cultures were available for 7 of 11 episodes among those with inherited complement deficiencies/immune-mediated conditions and the predominant capsular group was Y (7/11), followed by B (3/11) and non-groupable (1/11) strains. Among patients receiving Eculizumab therapy, 3 of the 9 episodes were due to group B (3/9), three others were NG but genotypically group B, and one case each of groups E, W and Y. CONCLUSIONS: In England, complement deficiency is rare among IMD cases and includes inherited disorders of the late complement pathway, immune-mediated disorders associated with low complement levels and patients on Eculizumab therapy. IMD due to capsular group Y predominates in patient with inherited complement deficiency, whilst those on Eculizumab therapy develop IMD due to more diverse capsular groups including non-encapsulated strains

Multi-Response Optimization of WEDM Process Parameters for Machining of Superelastic Nitinol Shape-Memory Alloy Using a Heat-Transfer Search Algorithm

Nitinol, a shape-memory alloy (SMA), is gaining popularity for use in various applications. Machining of these SMAs poses a challenge during conventional machining. Henceforth, in the current study, the wire-electric discharge process has been attempted to machine nickel-titanium (Ni55.8Ti) super-elastic SMA. Furthermore, to render the process viable for industry, a systematic approach comprising response surface methodology (RSM) and a heat-transfer search (HTS) algorithm has been strategized for optimization of process parameters. Pulse-on time, pulse-off time and current were considered as input process parameters, whereas material removal rate (MRR), surface roughness, and micro-hardness were considered as output responses. Residual plots were generated to check the robustness of analysis of variance (ANOVA) results and generated mathematical models. A multi-objective HTS algorithm was executed for generating 2-D and 3-D Pareto optimal points indicating the non-dominant feasible solutions. The proposed combined approach proved to be highly effective in predicting and optimizing the wire electrical discharge machining (WEDM) process parameters. Validation trials were carried out and the error between measured and predicted values was negligible. To ensure the existence of a shape-memory effect even after machining, a differential scanning calorimetry (DSC) test was carried out. The optimized parameters were found to machine the alloy appropriately with the intact shape memory effect