29,696 research outputs found
Work Function of Single-wall Silicon Carbide Nanotube
Using first-principles calculations, we study the work function of single
wall silicon carbide nanotube (SiCNT). The work function is found to be highly
dependent on the tube chirality and diameter. It increases with decreasing the
tube diameter. The work function of zigzag SiCNT is always larger than that of
armchair SiCNT. We reveal that the difference between the work function of
zigzag and armchair SiCNT comes from their different intrinsic electronic
structures, for which the singly degenerate energy band above the Fermi level
of zigzag SiCNT is specifically responsible. Our finding offers potential
usages of SiCNT in field-emission devices.Comment: 3 pages, 3 figure
Morphological characterization of shocked porous material
Morphological measures are introduced to probe the complex procedure of shock
wave reaction on porous material. They characterize the geometry and topology
of the pixelized map of a state variable like the temperature. Relevance of
them to thermodynamical properties of material is revealed and various
experimental conditions are simulated. Numerical results indicate that, the
shock wave reaction results in a complicated sequence of compressions and
rarefactions in porous material. The increasing rate of the total fractional
white area roughly gives the velocity of a compressive-wave-series.
When a velocity is mentioned, the corresponding threshold contour-level of
the state variable, like the temperature, should also be stated. When the
threshold contour-level increases, becomes smaller. The area increases
parabolically with time during the initial period. The curve goes
back to be linear in the following three cases: (i) when the porosity
approaches 1, (ii) when the initial shock becomes stronger, (iii) when the
contour-level approaches the minimum value of the state variable. The area with
high-temperature may continue to increase even after the early
compressive-waves have arrived at the downstream free surface and some
rarefactive-waves have come back into the target body. In the case of energetic
material ... (see the full text)Comment: 3 figures in JPG forma
Magnification relations of quad lenses and applications on Einstein crosses
In this work, we mainly study the magnification relations of quad lens models
for cusp, fold and cross configurations. By dividing and ray-tracing in
different image regions, we numerically derive the positions and magnifications
of the four images for a point source lying inside of the astroid caustic.
Then, based on the magnifications, we calculate the signed cusp and fold
relations for the singular isothermal elliptical lenses. The signed fold
relation map has positive and negative regions, and the positive region is
usually larger than the negative region as has been confirmed before. It can
also explain that for many observed fold image pairs, the fluxes of the Fermat
minimum images are apt to be larger than those of the saddle images. We define
a new quantity cross relation which describes the magnification discrepancy
between two minimum images and two saddle images. Distance ratio is also
defined as the ratio of the distance of two saddle images to that of two
minimum images. We calculate the cross relations and distance ratios for nine
observed Einstein crosses. In theory, for most of the quad lens models, the
cross relations decrease as the distance ratios increase. In observation, the
cross relations of the nine samples do not agree with the quad lens models very
well, nevertheless, the cross relations of the nine samples do not give obvious
evidence for anomalous flux ratio as the cusp and fold types do. Then, we
discuss several reasons for the disagreement, and expect good consistencies for
more precise observations and better lens models in the future.Comment: 12 pages, 11 figures, accepted for publication in MNRA
Critical Current Density and Resistivity of MgB2 Films
The high resistivity of many bulk and film samples of MgB2 is most readily
explained by the suggestion that only a fraction of the cross-sectional area of
the samples is effectively carrying current. Hence the supercurrent (Jc) in
such samples will be limited by the same area factor, arising for example from
porosity or from insulating oxides present at the grain boundaries. We suggest
that a correlation should exist, Jc ~ 1/{Rho(300K) - Rho(50K)}, where Rho(300K)
- Rho(50K) is the change in the apparent resistivity from 300 K to 50 K. We
report measurements of Rho(T) and Jc for a number of films made by hybrid
physical-chemical vapor deposition which demonstrate this correlation, although
the "reduced effective area" argument alone is not sufficient. We suggest that
this argument can also apply to many polycrystalline bulk and wire samples of
MgB2.Comment: 11 pages, 3 figure
Specific heat and thermal conductivity of ferromagnetic magnons in Yttrium Iron Garnet
The specific heat and thermal conductivity of the insulating ferrimagnet
YFeO (Yttrium Iron Garnet, YIG) single crystal were measured
down to 50 mK. The ferromagnetic magnon specific heat shows a
characteristic dependence down to 0.77 K. Below 0.77 K, a downward
deviation is observed, which is attributed to the magnetic dipole-dipole
interaction with typical magnitude of 10 eV. The ferromagnetic magnon
thermal conductivity does not show the characteristic
dependence below 0.8 K. To fit the data, both magnetic defect
scattering effect and dipole-dipole interaction are taken into account. These
results complete our understanding of the thermodynamic and thermal transport
properties of the low-lying ferromagnetic magnons.Comment: 5 pages, 5 figure
Microscopic origin of local moments in a zinc-doped high- superconductor
The formation of a local moment around a zinc impurity in the high-
cuprate superconductors is studied within the framework of the bosonic
resonating-valence-bond (RVB) description of the model. A topological
origin of the local moment has been shown based on the phase string effect in
the bosonic RVB theory. It is found that such an moment distributes
near the zinc in a form of staggered magnetic moments at the copper sites. The
corresponding magnetic properties, including NMR spin relaxation rate, uniform
spin susceptibility, and dynamic spin susceptibility, etc., calculated based on
the theory, are consistent with the experimental measurements. Our work
suggests that the zinc substitution in the cuprates provide an important
experimental evidence for the RVB nature of local physics in the original (zinc
free) state.Comment: The topological reason of local moment formation is given. One figure
is adde
- …