Emission Characteristics of the Projectile Fragments at Relativistic Energy

A projectile (84^Kr_36) having kinetic energy around 1 A GeV was used to expose NIKFI BR-2 emulsion target. A total of 700 inelastic events are used in the present studies on projectile fragments. The emission angle of the projectile fragments are strongly affected by charge of the other projectile fragments emitted at same time with different emission angle is observed. The angular distribution studies show symmetrical nature for lighter charge projectile fragments. The symmetrical nature decreased with the charge of projectile fragments. At ~4o of emission angle for double charge projectile fragments, the momentum transfer during interaction is similar for various target species of emulsion were observed. We also observed a small but significant amplitude peaks on both side of the big peak for almost all light charge projectile fragments having different delta angle values. It reflects that there are few percent of projectile fragments that are coming from the decay of heavy projectile fragments or any other process.Comment: 32 pages, 17 Figure

Development and Wear Analysis of Carbidic Austempered Ductile Iron (CADI)

Abstract: The abrasion wear resistance of iron is improved by the incorporation of an extra phase in the matrix, typically consist of carbides. The objective of the present work is to produce carbides in a ductile cast iron which is subsequently austempered, to obtain the carbidic austempered ductile iron (CADI). Two variants of (CADI)were produced by heating carbidic ductile iron (CDI) to a austenitization temperature of 900 0 C for the period of 1hr and quenching in salt bath at temperature range 250 0 C,325 0 Cand 400 0 C for the period of 1hr, 2hr, 3hr respectively. The microstructural characteristics of the produced CADI were evaluated by optical microscope. The abrasion wear resistance was evaluated by testing in accordance with ASTM G 99 standard. Carbidic ductile iron (CDI) as-cast samples were taken as reference material to determine the relative wear resistance index E. The results obtained, allow to establishing a relationship between Cr content in the alloy, austempering parameters, microstructure and mechanical properties of CADI. It was found that increase in the CE, content in CADI increases the volume fraction of Carbides in an alloy which resulted in to enhancement in hardness and wear resistance

On the avoidability of breast cancer in industrialized societies: older mean age at first birth as an indicator of excess breast cancer risk

Background Breast cancer incidence continuous to increase. We examined at population level the association between the relative excess risk of breast cancer and previous age of mother at first birth. Method Incidence of breast cancer in 34 industrialized countries was obtained from the GLOBOCAN 2002 and SEER databases. Data on age of mother at first birth was collected through national statistics offices. National relative excess risk (RER) was calculated by subtracting the lowest age-specific incidence rate from the rate in each population, and dividing the difference by the latter. Results The national RER in 2002 correlated closely with a higher average age at first birth in 1972, 1982, 1992 and also 2002, Pearson correlation [r] being 0.83, 0.79, 0.72 and 0.61, respectively; P < 0.0001. RER of breast cancer in 2002 for those aged 15–44 years correlated closely with the mean age at first birth in 1982 and 1992 (r: 0.81 and 0.75; P < 0.0001), whereas RER for those aged 45–54 years correlated strongly with age at first birth in 1972 and 1982 (r: 0.81 and 0.76; P < 0.0001), and for those aged 55–64 years with age at first birth in 1972 (r: 0.77; P < 0.0001). Conclusions The rising age at first childbirth of mothers has been followed by marked increases in breast cancer incidence. Later age at first birth seems to characterize secular diffusion of ‘modern’ lifestyles with a potentially large impact on increased breast cancer risk, and hence should be accompanied by greater opportunities for prevention through modifiable risk factors

Characterizing Spatiotemporal Dynamics of Methane Emissions from Rice Paddies in Northeast China from 1990 to 2010

BACKGROUND: Rice paddies have been identified as major methane (CH(4)) source induced by human activities. As a major rice production region in Northern China, the rice paddies in the Three-Rivers Plain (TRP) have experienced large changes in spatial distribution over the recent 20 years (from 1990 to 2010). Consequently, accurate estimation and characterization of spatiotemporal patterns of CH₄ emissions from rice paddies has become an pressing issue for assessing the environmental impacts of agroecosystems, and further making GHG mitigation strategies at regional or global levels. METHODOLOGY/PRINCIPAL FINDINGS: Integrating remote sensing mapping with a process-based biogeochemistry model, Denitrification and Decomposition (DNDC), was utilized to quantify the regional CH(4) emissions from the entire rice paddies in study region. Based on site validation and sensitivity tests, geographic information system (GIS) databases with the spatially differentiated input information were constructed to drive DNDC upscaling for its regional simulations. Results showed that (1) The large change in total methane emission that occurred in 2000 and 2010 compared to 1990 is distributed to the explosive growth in amounts of rice planted; (2) the spatial variations in CH₄ fluxes in this study are mainly attributed to the most sensitive factor soil properties, i.e., soil clay fraction and soil organic carbon (SOC) content, and (3) the warming climate could enhance CH₄ emission in the cool paddies. CONCLUSIONS/SIGNIFICANCE: The study concluded that the introduction of remote sensing analysis into the DNDC upscaling has a great capability in timely quantifying the methane emissions from cool paddies with fast land use and cover changes. And also, it confirmed that the northern wetland agroecosystems made great contributions to global greenhouse gas inventory

Measurement of the cross-section and charge asymmetry of WW bosons produced in proton-proton collisions at s=8\sqrt{s}=8 TeV with the ATLAS detector

This paper presents measurements of the $W^+ \rightarrow \mu^+\nu$ and $W^- \rightarrow \mu^-\nu$ cross-sections and the associated charge asymmetry as a function of the absolute pseudorapidity of the decay muon. The data were collected in proton--proton collisions at a centre-of-mass energy of 8 TeV with the ATLAS experiment at the LHC and correspond to a total integrated luminosity of 20.2~\mbox{fb^{-1}}. The precision of the cross-section measurements varies between 0.8% to 1.5% as a function of the pseudorapidity, excluding the 1.9% uncertainty on the integrated luminosity. The charge asymmetry is measured with an uncertainty between 0.002 and 0.003. The results are compared with predictions based on next-to-next-to-leading-order calculations with various parton distribution functions and have the sensitivity to discriminate between them.Comment: 38 pages in total, author list starting page 22, 5 figures, 4 tables, submitted to EPJC. All figures including auxiliary figures are available at https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/STDM-2017-13

Search for new phenomena in final states with an energetic jet and large missing transverse momentum in pp collisions at √ s = 8 TeV with the ATLAS detector

Results of a search for new phenomena in final states with an energetic jet and large missing transverse momentum are reported. The search uses 20.3 fb−1 of √ s = 8 TeV data collected in 2012 with the ATLAS detector at the LHC. Events are required to have at least one jet with pT > 120 GeV and no leptons. Nine signal regions are considered with increasing missing transverse momentum requirements between Emiss T > 150 GeV and Emiss T > 700 GeV. Good agreement is observed between the number of events in data and Standard Model expectations. The results are translated into exclusion limits on models with either large extra spatial dimensions, pair production of weakly interacting dark matter candidates, or production of very light gravitinos in a gauge-mediated supersymmetric model. In addition, limits on the production of an invisibly decaying Higgs-like boson leading to similar topologies in the final state are presente

Search for chargino-neutralino production with mass splittings near the electroweak scale in three-lepton final states in √s=13 TeV pp collisions with the ATLAS detector

A search for supersymmetry through the pair production of electroweakinos with mass splittings near the electroweak scale and decaying via on-shell W and Z bosons is presented for a three-lepton final state. The analyzed proton-proton collision data taken at a center-of-mass energy of √s=13  TeV were collected between 2015 and 2018 by the ATLAS experiment at the Large Hadron Collider, corresponding to an integrated luminosity of 139  fb−1. A search, emulating the recursive jigsaw reconstruction technique with easily reproducible laboratory-frame variables, is performed. The two excesses observed in the 2015–2016 data recursive jigsaw analysis in the low-mass three-lepton phase space are reproduced. Results with the full data set are in agreement with the Standard Model expectations. They are interpreted to set exclusion limits at the 95% confidence level on simplified models of chargino-neutralino pair production for masses up to 345 GeV

Performance of the CMS Cathode Strip Chambers with Cosmic Rays

The Cathode Strip Chambers (CSCs) constitute the primary muon tracking device in the CMS endcaps. Their performance has been evaluated using data taken during a cosmic ray run in fall 2008. Measured noise levels are low, with the number of noisy channels well below 1%. Coordinate resolution was measured for all types of chambers, and fall in the range 47 microns to 243 microns. The efficiencies for local charged track triggers, for hit and for segments reconstruction were measured, and are above 99%. The timing resolution per layer is approximately 5 ns

Protein kinase C α and ε phosphorylation of troponin and myosin binding protein C reduce Ca2+ sensitivity in human myocardium

Previous studies indicated that the increase in protein kinase C (PKC)-mediated myofilament protein phosphorylation observed in failing myocardium might be detrimental for contractile function. This study was designed to reveal and compare the effects of PKCα- and PKCε-mediated phosphorylation on myofilament function in human myocardium. Isometric force was measured at different [Ca2+] in single permeabilized cardiomyocytes from failing human left ventricular tissue. Activated PKCα and PKCε equally reduced Ca2+ sensitivity in failing cardiomyocytes (ΔpCa50 = 0.08 ± 0.01). Both PKC isoforms increased phosphorylation of troponin I- (cTnI) and myosin binding protein C (cMyBP-C) in failing cardiomyocytes. Subsequent incubation of failing cardiomyocytes with the catalytic subunit of protein kinase A (PKA) resulted in a further reduction in Ca2+ sensitivity, indicating that the effects of both PKC isoforms were not caused by cross-phosphorylation of PKA sites. Both isozymes showed no effects on maximal force and only PKCα resulted in a modest significant reduction in passive force. Effects of PKCα were only minor in donor cardiomyocytes, presumably because of already saturated cTnI and cMyBP-C phosphorylation levels. Donor tissue could therefore be used as a tool to reveal the functional effects of troponin T (cTnT) phosphorylation by PKCα. Massive dephosphorylation of cTnT with alkaline phosphatase increased Ca2+ sensitivity. Subsequently, PKCα treatment of donor cardiomyocytes reduced Ca2+ sensitivity (ΔpCa50 = 0.08 ± 0.02) and solely increased phosphorylation of cTnT, but did not affect maximal and passive force. PKCα- and PKCε-mediated phosphorylation of cMyBP-C and cTnI as well as cTnT decrease myofilament Ca2+ sensitivity and may thereby reduce contractility and enhance relaxation of human myocardium