Experimental assessment of periodic piezoelectric composite arrays incorporating an anisotropic passive phase

This paper discusses the experimental assessment of a number of piezoelectric composite array structures incorporating a novel passive phase exhibiting anisotropic elastic properties. The passive polymer phase has been designed to limit inter-element crosstalk by attenuating lateral propagation across the array aperture. A selection of water coupled linear array coupons, operating with a nominal 400 kHz fundamental thickness mode frequency, has been prepared comprising the novel anisotropic passive phase. As a control, comparisons are made to similarly configured devices employing isotropic filler materials. Scanning laser vibrometry and measurements of electrical impedance characteristic on the array substrate demonstrate that the fundamental thickness mode of the devices configured with anisotropic polymer fillers is not contaminated by parasitic modes of vibration. The reasons for this are explained by considering the dispersion characteristics of the substrate. Water coupled hydrophone measurements of array element directivity; transmit voltage response and subsequently efficiency calculations illustrate that the observed reduction in mechanical cross talk has not been achieved at the expense of element sensitivity. Finally, comparisons between the experimental data and the PZFlex derived array responses are made, with good corroboration demonstrate

Performance of periodic piezoelectric composite arrays incorporating a passive phase exhibiting anisotropic properties

This paper explores the minimisation of interelement cross talk in 1-D and 2-D periodic composite array structures through the incorporation of a passive phase exhibiting anisotropic elastic properties. Initially the PZFlex finite element code was used to monitor array aperture response as a function of material properties. It is shown that in array structures comprising passive polymer materials possessing low longitudinal loss and high shear loss, inter-element mechanical cross talk is reduced, without a concomitant reduction in element sensitivity. A number of polymer materials with the desired properties were synthesised and their elastic character confirmed through a program of materials characterisation. Finally, a range of experimental devices exhibiting improved directional response, as a result of a significant reduction in interelement cross talk, are presented and the predicted array characteristics are shown to compare favourably in each case

Theoretical modelling of frequency dependent elastic loss in composite piezoelectric transducers

The large number of degrees of freedom in the design of piezoelectric transducers requires a theoretical model that is computationally efficient so that a large number of iterations can be performed in the design optimisation. The materials used are often lossy, and indeed loss can be used to enhance the operational characteristics of these designs. Motivated by these needs, this paper extends the one-dimensional linear systems model to incorporate frequency dependent elastic loss. The reception sensitivity, electrical impedance and electromechanical coupling coefficient of a 1-3 composite transducer, with frequency dependent loss in the polymer filler, are investigated. By plotting these operating characteristics as a function of the volume fraction of piezoelectric ceramic an optimum design is obtained. A device with a non-standard, high shear attenuation polymer is also simulated and this leads to an increase in the electromechanical coupling coefficient. A comparison with finite element simulations is then performed. This shows that the two methods are in reasonable agreement in their electrical impedance profiles in all the cases considered. The plots are almost identical away from the main resonant peak where the frequency location of the peaks are comparable but there is in some cases a 20% discrepancy in the magnitude of the peak value and in its bandwidth. The finite element model also shows that the use of a high shear attenuation polymer filler damps out the unwanted, low frequency modes whilst maintaining a reasonable impedance magnitude

A theoretical analysis of a piezoelectric ultrasound device with an active matching layer

This paper investigates the use of magnetically active materials in the matching layer of a piezoelectric transducer. This then allows the performance of the device to be dynamically altered by applying an external field. The effect that this new matching layer has on the performance of a typical device is theoretically investigated here. It transpires that the additional flexibility of an active matching layer can be used to maintain the efficiency of the device as the external load is varied

Introducing the UK Antimicrobial Registry (UKAR) study: providing real world data on new antimicrobials to support antimicrobial stewardship and tackle antimicrobial resistance

The UK Antimicrobial Registry (UKAR) has been developed to capture data on real world usage of antimicrobial agents with an initial focus on those used to treat drug-resistant infections. Several industry partners have committed support for the study, which is included in the National Institute for Health and Care Research (NIHR) portfolio in England with similar arrangements in the three devolved UK nations. The two antimicrobials in the National Institute for Health and Care Excellence (NICE) subscription model pilot (cefiderocol and ceftazidime/avibactam) are included in the UKAR and future expansion of work in this area is planned. This model decouples payment from usage by using a fixed annual fee. The study will provide information on the characteristics of patients receiving study drugs, the infections being treated, treatment effectiveness and adverse events. UKAR potentially provides a novel resource of enduring value to support healthcare in the UK and more widely and contribute to AMR National Action Plan goals for optimal use of antimicrobials

P2Y1 receptor modulation of endogenous ion channel function in Xenopus oocytes: Involvement of transmembrane domains

Agonist activation of the hP2Y1 receptor expressed in Xenopus oocytes stimulated an endogenous voltage-gated ion channel, previously identified as the transient inward (Tin) channel. When human P2Y1 (hP2Y1) and skate P2Y (sP2Y) receptors were expressed in Xenopus oocytes, time-to-peak values (a measure of the response to membrane hyperpolarization) of the Tin channel were significantly reduced compared to oocytes expressing the hB1-bradykinin receptor or the rat M1-muscarinic (rM1) receptor. Differences in activation were also observed in the Tin currents elicited by various P2Y receptor subtypes. The time-to-peak values of the Tin channel in oocytes expressing the hP2Y4, hP2Y11, or hB1-bradykinin receptors were similar, whereas the channel had significantly shorter time-to-peak values in oocytes expressing either the hP2Y1 or sP2Y receptor. Amino acid substitutions at His-132, located in the third transmembrane domain (TM3) of the hP2Y1 receptor, delayed the onset of channel opening, but not the kinetics of the activation process. In addition, Zn2+ sensitivity was also dependent on the subtype of P2Y receptor expressed. Replacement of His-132 in the hP2Y1 receptor with either Ala or Phe increased Zn2+ sensitivity of the Tin current. In contrast, truncation of the C-terminal region of the hP2Y1 receptor had no affect on activation or Zn2+ sensitivity of the Tin channel. These results suggested that TM3 in the hP2Y1 receptor was involved in modulating ion channel function and blocker pharmacology of the Tin channel

A decadal view of biodiversity informatics: challenges and priorities

Biodiversity informatics plays a central enabling role in the research community's efforts to address scientific conservation and sustainability issues. Great strides have been made in the past decade establishing a framework for sharing data, where taxonomy and systematics has been perceived as the most prominent discipline involved. To some extent this is inevitable, given the use of species names as the pivot around which information is organised. To address the urgent questions around conservation, land-use, environmental change, sustainability, food security and ecosystem services that are facing Governments worldwide, we need to understand how the ecosystem works. So, we need a systems approach to understanding biodiversity that moves significantly beyond taxonomy and species observations. Such an approach needs to look at the whole system to address species interactions, both with their environment and with other species. It is clear that some barriers to progress are sociological, basically persuading people to use the technological solutions that are already available. This is best addressed by developing more effective systems that deliver immediate benefit to the user, hiding the majority of the technology behind simple user interfaces. An infrastructure should be a space in which activities take place and, as such, should be effectively invisible. This community consultation paper positions the role of biodiversity informatics, for the next decade, presenting the actions needed to link the various biodiversity infrastructures invisibly and to facilitate understanding that can support both business and policy-makers. The community considers the goal in biodiversity informatics to be full integration of the biodiversity research community, including citizens’ science, through a commonly-shared, sustainable e-infrastructure across all sub-disciplines that reliably serves science and society alike