The Effect of Science Inservice Programs on the Self-Efficacy Belief of Elementary School Teachers

The Problem: Science education at the elementary level has not been successful. As a nation we are producing fewer and fewer scientists and science teachers, as evidenced by the narrowing of the pipeline of students entering science classes in high school and beyond. Since a student\u27s interest in science begins at the elementary level, any improvement in science education in these grades will help ameliorate the trend toward science illiteracy. Such an improvement rests on three critical areas: the teacher, the curriculum, and the methodology. Since preservice programs do not include rigorous science requirements, it is necessary to supplement teacher training with inservice programs addressing all three areas. What a teacher knows and believes has the most influence on what is taught in the classroom; hence the more the teacher\u27s content and belief system are augmented, the greater the teacher\u27s self efficacy. This research questioned the effectiveness of inservice programs on efficacy, and examined correlations of other variables such as gender, years teaching, and grade level taught. Subjective questions investigated qualities of inservice programs and what would facilitate greater involvement. The Research: This study included three groups of teachers: a treatment group involved in an intensive science inservice program and two control groups. Data from a science efficacy belief instrument and a demographic questionnaire were analyzed using a variety of statistical measures: central tendency, chi square, and analysis of variance. The Results: The self efficacy of the elementary teachers involved in the intensive inservice program was significantly higher than that of the two control groups. In addition, these teachers taught more science and taught using different methods than the other two groups. They were also more active in sharing science information with their colleagues. Teachers agreed that the best inservice programs were relevant to their needs and that more flexible scheduling would increase teacher participation. For the group involved in this study, the science inservice program enhanced the teachers, the curriculum, and the methodology for the improvement of elementary science education

Simulation-assisted control in building energy management systems

Technological advances in real-time data collection, data transfer and ever-increasing computational power are bringing simulation-assisted control and on-line fault detection and diagnosis (FDD) closer to reality than was imagined when building energy management systems (BEMSs) were introduced in the 1970s. This paper describes the development and testing of a prototype simulation-assisted controller, in which a detailed simulation program is embedded in real-time control decision making. Results from an experiment in a full-scale environmental test facility demonstrate the feasibility of predictive control using a physically-based thermal simulation program

Do woodland birds prefer to forage in healthy Eucalyptus wandoo trees?

Globally, many forests and woodlands are in decline. The marked loss of canopy foliage typical of these declines results in reduced foraging resources (e.g. nectar, pollen, and insects) and, subsequently, can reduce habitat quality for woodland birds. In south-west Western Australia, patches of Eucalyptus wandoo woodlands have shown a decline in condition since at least 2002. We investigated how changes in E. wandoo condition affect the woodland bird community. Foraging activities of three bird species were recorded for 20 sites in Dryandra State Forest and Wandoo Conservation Park either by conducting watches on focal trees ('sitting' method), or following individuals through the woodland ('following' method). Condition assessments of trees used by the birds were compared with those for trees available at the study site. Weebills (Smicrornis brevirostris; canopy insectivore) displayed preference for healthy trees (low amounts of canopy dieback), whereas rufous treecreepers (Climacteris rufa; bark-foraging insectivore) preferred trees with a higher proportion of dead branches. Yellow-plumed honeyeaters (Lichenostomus ornatus; insectivore/nectarivore) foraged in older, larger E. wandoo trees having full canopies with few signs of tree decline. Tree declines, such as that happening in E. wandoo, alter the foraging resources and habitat available to woodland birds

Techno-economic and reliability assessment of solar water heaters in Australia based on Monte Carlo analysis

Monte Carlo analysis is used in this study to estimate the techno-economic benefits and reliabilities of solar water heaters. The study focuses on a product range manufactured by a local company in Australia. The historical data provided by the company forms the basis of this investigation. The inverse Weibull distribution function is a good match for representing the historical data in the model in terms of the number of failures per operating time for each component. The overall system reliability is determined as the sum of individual component failures during the product lifetime. The analysis is carried out for different system configurations using copper, stainless steel and glass-lined storage tanks. All the systems utilise flat plate collectors. The product with glass-lined storage tanks and electric boosters show a good overall reliability if systems are maintained. Based on the probability model, the variable maintenance costs of solar water heaters were estimated over the product lifetime. This together with capital expenditures and fuel charges are used to compute the specific price of hot water supply for different system configurations. Moreover, a sensitivity analysis is implemented to show the impact of auxiliary heating on the economic viability of the products. The results show that solar water heaters can offer significantly better long-term economic viability compared to conventional systems at moderate auxiliary energy consumptions

11D supergravity at O(l3){\cal O}(l^3)

We compute certain spinorial cohomology groups controlling possible supersymmetric deformations of eleven-dimensional supergravity up to order $l^3$ in the Planck length. At ${\cal O}(l)$ and ${\cal O}(l^2)$ the spinorial cohomology groups are trivial and therefore the theory cannot be deformed supersymmetrically. At ${\cal O}(l^3)$ the corresponding spinorial cohomology group is generated by a nontrivial element. On an eleven-dimensional manifold $M$ such that $p_1(M)\neq 0$, this element corresponds to a supersymmetric deformation of the theory, which can only be redefined away at the cost of shifting the quantization condition of the four-form field strength.Comment: 10 pages, 1 figure. v2: references adde

Quantum radiation pressure on a moving mirror at finite temperature

We compute the radiation pressure force on a moving mirror, in the nonrelativistic approximation, assuming the field to be at temperature $T.$ At high temperature, the force has a dissipative component proportional to the mirror velocity, which results from Doppler shift of the reflected thermal photons. In the case of a scalar field, the force has also a dispersive component associated to a mass correction. In the electromagnetic case, the separate contributions to the mass correction from the two polarizations cancel. We also derive explicit results in the low temperature regime, and present numerical results for the general case. As an application, we compute the dissipation and decoherence rates for a mirror in a harmonic potential well.Comment: Figure 3 replaced, changes mainly in Sections IV and V, new appendix introduced. To appear in Physical Review

Clinical investigation of an outbreak of alveolitis and asthma in a car engine manufacturing plant

Background Exposure to metal working fluid (MWF) has been associated with outbreaks of EAA in the US, with bacterial contamination of MWF being a possible cause, but was uncommon in the UK. Twelve workers developed extrinsic allergic alveolitis (EAA) in a car engine manufacturing plant in the UK, presenting clinically between December 2003 and May 2004. This paper reports the subsequent epidemiological investigation of the whole workforce. This had three aims:- • To measure the extent of the outbreak by identifying other workers who may have developed EAA or other work-related respiratory diseases. • To provide case-detection so that those affected can be treated. • To provide epidemiological data to identify the cause of the outbreak. Methods The outbreak was investigated in a three-phase cross-sectional survey of the workforce. Phase I A respiratory screening questionnaire was completed by 808/836 workers (96.7%) in May 2004. Phase II 481 employees with at least one respiratory symptom on screening and 50 asymptomatic controls were invited for investigation at the factory in June 2004. This included a questionnaire, spirometry and clinical opinion. 454/481(94.4%) responded along with 48/50(96%) controls. Workers were identified who needed further investigation and serial measurements of peak expiratory flow (PEF). Phase III 162 employees were seen at the Birmingham Occupational Lung Disease clinic. 198 employees returned PEF records, including 141 of the 162 who attended for clinical investigation. Case definitions for diagnoses were agreed. Results 87 workers (10.4% of workforce) met case definitions for occupational lung disease, comprising EAA(19), occupational asthma(74) and humidifier fever(7). 12 workers had more than one diagnosis. The peak onset of work-related breathlessness was Spring 2003. The proportion of workers affected was higher for those using metal working fluid (MWF) from a large sump(27.3%) compared with working all over the manufacturing area (7.9%) (OR=4.39,p<0.001). Two workers had positive specific provocation tests to the used but not the unused MWF solution. Conclusions Extensive investigation of the outbreak of EAA detected a large number of affected workers, not only with EAA but also occupational asthma. This is the largest reported outbreak in Europe. Mist from used MWF is the likely cause. In workplaces using MWF, there is a need to carry out risk assessments, to monitor and maintain fluid quality, to control mist and to carry out respiratory health surveillance

Site 1220

Site 1220 (10°10.600´N, 142°45.503´W; 5218 meters below sea level (mbsl); Fig. F1) forms a southerly component of the 56-Ma transect drilled during Leg 199. It is situated about midway between the Clipperton and Clarion Fracture Zones in typical abyssal hill topography. On the basis of regional magnetic anomalies, we anticipated basement age at Site 1220 to be equivalent to Chron C25n (~56 Ma; Cande et al., 1989), slightly older than at Site 1219. At the outset of drilling at Site 1220, our estimate for total sediment depth was ~225 meters below seafloor (mbsf) (Fig. F2). Based upon a fixed hotspot model (Gripp and Gordon, 1990, for 0- to 5-Ma Pacific hotspot rotation pole; Engebretson et al., 1985, for older poles), Site 1220 should have been located ~3° south of the equator at 56 Ma and in an equatorial position at 40 Ma. Thus, Site 1220 should have been situated underneath the South Equatorial Current in the early Eocene. A nearby piston core (EW9709-13PC) taken during the site survey cruise recovered &gt;16 m of red clay, with the base of the core dated as middle-early Miocene on the basis of radiolarian biostratigraphy (Lyle, 2000). Site 1220 will be used to study equatorial ocean circulation from the late Paleocene through the late Eocene during the early Cenozoic thermal maximum. Sediment records from this site will help to define the calcite compensation depth (CCD) and lysocline during the Paleocene-Eocene and Eocene-Oligocene transitions. In this and other respects, Site 1220 will act as an interesting analog to Site 1218. Both sites are thought to have been located on the equator at ~40 Ma, but the older crustal age anticipated at Site 1220 dictates a greater paleowater depth than for contemporaneous sediments accumulating at Site 1218