Trade-offs between biomass use and soil cover. The case of rice-based cropping systems in the lake Alaotra region of Madagascar

Farmers in the Lake Alaotra region of Madagascar are currently evaluating a range of conservation agriculture (CA) cropping systems. Most of the expected agroecological functions of CA (weed control, erosion control and water retention) are related to the degree of soil cover. Under farmers’ conditions, the grain and biomass productivity of these systems is highly variable and the biomass is used for several purposes. In this study, we measured biomass production of cover crops and crops in farmers’ fields. Further, we derived relationships to predict the soil cover that can be generated for a particular quantity of mulch. We used these relationships to explore the variability of soil cover that can be generated in farmers’ fields, and to estimate howmuch of the biomass can be removed for use as livestock feed, while retaining sufficient soil cover. Three different kinds of cropping systems were investigated in 91 farmers’ fields. The first two cropping sequences were on the hillsides: (i) maize + pulse (Vigna unguiculata or Dolichos lablab) in year 1, followed by upland rice in year 2; (ii) the second crop sequence included several years of Stylosanthes guianensis followed by upland rice; (iii) the third crop sequence was in lowland paddy fields: Vicia villosa or D. lablab, which was followed by rice within the same year and repeated every year. The biomass available prior to rice sowing varied from 3.6 t ha-1 with S. guianensis to 7.3 t ha-1 with V. villosa. The relationship between the mulch quantity (M) and soil cover (C) was measured using digital imaging and was well described by the following equation: C = 1 - exp(-Am × M), where Am is an area-to-mass ratio with R2 > 0.99 in all cases. The calculated average soil cover varied from 56 to 97% for maize + V. unguiculata and V. villosa, respectively. In order to maintain 90% soil cover at rice sowing, the average amount of biomass of V. villosa that could be removed was at least 3 t ha-1 for three quarters of the fields. This quantity was less for other annual or biennial cropping systems. On average the V. villosa aboveground biomass contained 236 kg N ha-1. The study showed that for the conditions of farmers of Malagasy, the production and conservation of biomass is not always sufficient to fulfil all the above-cited agroecological functions of mulch. Inventory of the soil cover capacity for different types of mulch may help farmers to decide how much biomass they can remove from the fiel

Grain legume–cereal intercropping systems

Chapitre 11Grain legume–cereal intercropping system

Limits of conservation agriculture to overcome low crop yields in sub-Saharan Africa

Conservation agriculture (CA) has become a dominant paradigm in scientific and policy thinking about the sustainable intensification of food production in sub-Saharan Africa. Yet claims that CA leads to increasing crop yields in African smallholder farming systems remain controversial. Through a meta-analysis of 933 observations from 16 different countries in sub-Saharan African studies, we show that average yields under CA are only slightly higher than those of conventional tillage systems (3.7% for six major crop species and 4.0% for maize). Larger yield responses for maize result from mulching and crop rotations/intercropping. When CA principles are implemented concomitantly, maize yield increases by 8.4%. The largest yield benefits from CA occur in combination with low rainfall and herbicides. We conclude that although CA may bring soil conservation benefits, it is not a technology for African smallholder farmers to overcome low crop productivity and food insecurity in the short term

A New Compendium of Unsteady Aerodynamic Test Cases for CFD: Summary of AVT WG-003 Activities

With the continuous progress in hardware and numerical schemes, Computational Unsteady Aerodynamics (CUA), that is, the application of Computational Fluid Dynamics (CFD) to unsteady flowfields, is slowly finding its way as a useful and reliable tool (turbulence and transition modeling permitting) in the aircraft, helicopter, engine and missile design and development process. Before a specific code may be used with confidence it is essential to validate its capability to describe the physics of the flow correctly, or at least to the level of approximation required, for which purpose a comparison with accurate experimental data is needed. Unsteady wind tunnel testing is difficult and expensive; two factors which dramatically limit the number of organizations with the capability and/or resources to perform it. Thus, unsteady experimental data is scarce, often classified and scattered in diverse documents. Additionally, access to the reports does not necessarily assure access to the data itself. The collaborative effort described in this paper was conceived with the aim of collecting into a single easily accessible document as much quality data as possible. The idea is not new. In the early 80's NATO's AGARD (Advisory Group for Aerospace Research & Development) Structures and Material Panel (SMP) produced AGARD Report No. 702 "Compendium of Unsteady Aerodynamic Measurements", which has found and continues to find extensive use within the CUA Community. In 1995 AGARD's Fluid Dynamics Panel (FDP) decided to update and expand the former database with new geometries and physical phenomena, and launched Working Group WG-22 on "Validation Data for Computational Unsteady Aerodynamic Codes". Shortly afterwards AGARD was reorganized as the RTO (Research and Technology Organization) and the WG was renamed as AVT (Applied Vehicle Technolology) WG-003. Contributions were received from AEDC, BAe, DLR, DERA, Glasgow University, IAR, NAL, NASA, NLR, and ONERA. The final publication with the results of the exercise is expected in the second part of 1999. The aim of the present paper is to announce and present the new database to the Aeroelasticity community. It is also intended to identify, together with one of the groups of end users it targets, deficiencies in the compendium that should be addressed by means of new wind tunnel tests or by obtaining access to additionally existing data

Short communication: Genetic analysis of lactation curves in buffaloes, using Wood’s model

Aim of study: To estimate the heritability and genetic correlations for lactation curve traits in buffaloes.Area of study: The buffalo cows were raised on properties located in the states of São Paulo, Ceará and Rio Grande do Norte, Brazil.Material and methods: The individual parameters of Wood’s model ( , , and ) were obtained using a non-linear mixed model. Peak yield (PY), peak time (PT) and lactation persistency (LP) were also calculated. These individual parameters were employed in multi-trait analysis with the milk yield (MY) using Bayesian inference.Main results: The heritability estimates were of low to moderate magnitudes, with values ranging from 0.156 ( ) to 0.299 (PY). The estimates for genetic correlation between the Wood’s parameters and MY were of low to high magnitude and ranged from -0.533 (  and MY) to 0.983 (PY and MY).Research highlights: The heritability estimates obtained indicate that the traits studied can be used in animal breeding programs

Polypyrrole-Fe2O3 nanohybrid materials for electrochemical storage

We report on the synthesis and electrochemical characterization of nanohybrid polypyrrole (PPy) (PPy/Fe2O3) materials for electrochemical storage applications. We have shown that the incorporation of nanoparticles inside the PPy notably increases the charge storage capability in comparison to the “pure” conducting polymer. Incorporation of large anions, i.e., paratoluenesulfonate, allows a further improvement in the capacity. These charge storage modifications have been attributed to the morphology of the composite in which the particle sizes and the specific surface area are modified with the incorporation of nanoparticles. High capacity and stability have been obtained in PC/NEt4BF4 (at 20 mV/s), i.e., 47 mAh/g, with only a 3% charge loss after one thousand cyles. The kinetics of charge–discharge is also improved by the hybrid nanocomposite morphology modifications, which increase the rate of insertion–expulsion of counter anions in the bulk of the film. A room temperature ionic liquid such as imidazolium trifluoromethanesulfonimide seems to be a promising electrolyte because it further increases the capacity up to 53 mAh/g with a high stability during charge–discharge processes