80 research outputs found
Structural and magnetic properties of CoPt mixed clusters
In this present work, we report a structural and magnetic study of mixed
Co58Pt42 clusters. MgO, Nb and Si matrix can be used to embed clusters,
avoiding any magnetic interactions between particles. Transmission Electron
Microscopy (TEM) observations show that Co58Pt42 supported isolated clusters
are about 2nm in diameter and crystallized in the A1 fcc chemically disordered
phase. Grazing Incidence Small Angle X-ray Scattering (GISAXS) and Grazing
Incidence Wide Angle X-ray Scattering (GIWAXS) reveal that buried clusters
conserve these properties, interaction with matrix atoms being limited to their
first atomic layers. Considering that 60% of particle atoms are located at
surface, this interactions leads to a drastic change in magnetic properties
which were investigated with conventional magnetometry and X-Ray Magnetic
Circular Dichro\"{i}sm (XMCD). Magnetization and blocking temperature are
weaker for clusters embedded in Nb than in MgO, and totally vanish in silicon
as silicides are formed. Magnetic volume of clusters embedded in MgO is close
to the crystallized volume determined by GIWAXS experiments. Cluster can be
seen as a pure ferromagnetic CoPt crystallized core surrounded by a
cluster-matrix mixed shell. The outer shell plays a predominant role in
magnetic properties, especially for clusters embedded in niobium which have a
blocking temperature 3 times smaller than clusters embedded in MgO
Fluorescent oxide nanoparticles adapted to active tips for near-field optics
We present a new kind of fluorescent oxide nanoparticles with properties well
suited to active-tip based near-field optics. These particles with an average
diameter in the range 5-10 nm are produced by Low Energy Cluster Beam
Deposition (LECBD) from a YAG:Ce3+ target. They are studied by transmission
electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), classical
photoluminescence, cathodoluminescence and near-field scanning optical
microscopy (NSOM). Particles of extreme photo-stability as small as 10 nm in
size are observed. These emitters are validated as building blocks of active
NSOM tips by coating a standard optical tip with a 10 nm thick layer of
YAG:Ce3+ particles directly in the LECBD reactor and by subsequently performing
NSOM imaging of test surfaces.Comment: Changes made following Referee's comments; added references; one
added figure. See story on this article at:
http://nanotechweb.org/cws/article/tech/3606
Correlation between the Extraordinary Hall Effect and Resistivity
We study the contribution of different types of scattering sources to the
extraordinary Hall effect. Scattering by magnetic nano-particles embedded in
normal-metal matrix, insulating impurities in magnetic matrix, surface
scattering and temperature dependent scattering are experimentally tested. Our
new data, as well as previously published results on a variety of materials,
are fairly interpreted by a simple modification of the skew scattering model
Experimental evidence of a new crystallographic structure of samarium deposited by cluster beam
A new fcc phase of Sm has been obtained by deposition of Sm clusters with the low-energy cluster beam deposition technique. The formation of this new phase corresponds to a commensurable phase which accomodates the large lattice parameter of divalent surface atoms and trivalent core atoms of the supported Sm clusters.Une nouvelle structure de samarium obtenue par dépôt d'agrégats a été observée.
Cette structure est du type cubique faces centrées. Dans le cas d'agrégats, les formes particulières de la structure cfc (particules multimaclées, icosaèdre, ...) permettent d'avoir une phase commensurable qui accomode l'importante différence de paramètre de maille entre les atomes de surface divalents et les atomes de coeur trivalents des agrégats déposés
ZnO cluster assembled film with low defect concentration: towards ultra-low power sensors
23-25 mars 2015International audienceSmall, low power sensors and actuators are vital for systems of all kinds to interact with their environment. Interest in gas sensing has been prompted from the need of monitoring our environment and particularly hazardous substances having negative effects on the environment and human welfare. Chemical sensors have been used extensively for the detection of hazardous pollutant gases, combustible gases and organic vapors. In this way, past few decades have found widespread applications for semiconducting metal nano oxides as solid-state gas sensors. The operating principle is based from the dependence of the conductivity through physisorption with the composition and the concentration of the surrounded atmosphere. Among them ZnO is very popular due to its superior reactivity, its non-toxicity, its chemical robustness, a large bandgap and a low synthesis price. However, the natural and often uncontrolled n doping, is a strong barrier for reproducibility results. We report a state of the art ZnO cluster assembled film nearly defect free which exhibit a huge and reproducible reactivity in a limited range of temperature. This perfect control of the defects is the key point for gas sensor upgrading with respect to the sensitivity, the selectivity, the reproducibility, the linearity and the life time. It takes an innovative look for reducing both size and power consumption allowing the integration in complex chips
Exceptional Ideal Strength of Carbon Clathrates
International audienceWe study by means of ab initio calculations the ideal tensile and shear strengths of the C-46 clathrate phase. While its bulk modulus and elastic constants are smaller than in diamond, its strength is found to be in all directions larger than the critical stresses associated with the diamond {111} planes of easy slip. This can be related to the frustration by the clathrate cage structure of the diamond to graphite instability under hydrostatic stress conditions. The criteria for designing strong materials are discussed
ZnO cluster assembled film with low defect concentration: towards ultra-low power sensors
23-25 mars 2015International audienceSmall, low power sensors and actuators are vital for systems of all kinds to interact with their environment. Interest in gas sensing has been prompted from the need of monitoring our environment and particularly hazardous substances having negative effects on the environment and human welfare. Chemical sensors have been used extensively for the detection of hazardous pollutant gases, combustible gases and organic vapors. In this way, past few decades have found widespread applications for semiconducting metal nano oxides as solid-state gas sensors. The operating principle is based from the dependence of the conductivity through physisorption with the composition and the concentration of the surrounded atmosphere. Among them ZnO is very popular due to its superior reactivity, its non-toxicity, its chemical robustness, a large bandgap and a low synthesis price. However, the natural and often uncontrolled n doping, is a strong barrier for reproducibility results. We report a state of the art ZnO cluster assembled film nearly defect free which exhibit a huge and reproducible reactivity in a limited range of temperature. This perfect control of the defects is the key point for gas sensor upgrading with respect to the sensitivity, the selectivity, the reproducibility, the linearity and the life time. It takes an innovative look for reducing both size and power consumption allowing the integration in complex chips
Deposition of AuN clusters on Au(111) surfaces: Experimental results and comparison with simulations
info:eu-repo/semantics/publishe
- …