2,959 research outputs found
SPEED, STRENGTH & POWER CHARACTERISITCS OF HORIZONTAL JUMPERS
It is well established that approach speed on the long and triple jump runways is the single-most important determinant of performance across a wide range of ability levels (Hay, 1986; Hay, 1992). However, the relationship between speed and jump distance decreases when the range of performances is reduced.
At an elite level speed is regarded as a pre-requisite, the differentiating factor between performances relates more to how well athlete control their speed when they make contact with the take-off board (and subsequent take-offs in the triple jump). In the take-off athletes typically experience vertical impact forces in the range of 7.9 to 12.6 x BW (Ramey and Williams, 1985), with ground contact times ranging from 120 to 180 ms (the higher values relating to the step and jump take-offs). It is therefore imperative that horizontal jumpers are conditioned appropriately to accept such high loading forces, be powerful and reactive, in order to generate vertical speed in such a small timescale. Graham-Smith and Lees (2002) suggested that performance is made up of three main interacting factors; speed, strength and technique (with power being a derivative of speed and strength). They added that optimal performance can only be achieved when all three factors are in ‘balance’.
The aim of this study was to develop a battery of tests to monitor speed, strength and power for horizontal jumpers in as functional a way as possible. The relationship between strength and power variables with speed and controlled functional performance was also investigated
A Semi-Analytical Model of Visible-Wavelength Phase Curves of Exoplanets and Applications to Kepler-7 b and Kepler-10 b
Kepler has detected numerous exoplanet transits by precise measurements of
stellar light in a single visible-wavelength band. In addition to detection,
the precise photometry provides phase curves of exoplanets, which can be used
to study the dynamic processes on these planets. However, the interpretation of
these observations can be complicated by the fact that visible-wavelength phase
curves can represent both thermal emission and scattering from the planets.
Here we present a semi-analytical model framework that can be applied to study
Kepler and future visible-wavelength phase curve observations of exoplanets.
The model efficiently computes reflection and thermal emission components for
both rocky and gaseous planets, considering both homogeneous and inhomogeneous
surfaces or atmospheres. We analyze the phase curves of the gaseous planet
Kepler-7 b and the rocky planet Kepler-10 b using the model. In general, we
find that a hot exoplanet's visible-wavelength phase curve having a significant
phase offset can usually be explained by two classes of solutions: one class
requires a thermal hot spot shifted to one side of the substellar point, and
the other class requires reflective clouds concentrated on the same side of the
substellar point. The two solutions would require very different Bond albedos
to fit the same phase curve; atmospheric circulation models or eclipse
observations at longer wavelengths can effectively rule out one class of
solutions, and thus pinpoint the albedo of the planet, allowing decomposition
of the reflection and the thermal emission components in the phase curve.
Particularly for Kepler-7 b, reflective clouds located on the west side of the
substellar point can best explain its phase curve. We further derive that the
reflectivity of the clear part of the atmosphere should be less than 7% and
that of the cloudy part should be greater than 80% (abridged)Comment: 16 pages, 7 figures, accepted for publication in Ap
Givetian
The Givetian Stage in the Givet area is represented by the main part of the Hanonet Fm, the Trois-Fontaines Fm, the Terres d'Haurs Fm, the Mont d'Haurs Fm, the Fromelennes Fm and the lowest part of the Nismes Fm. During Eifelian-Givetian transition, the sedimentary systems evolved from a mixed siliciclastic-carbonate ramp to a carbonate platform dominated by cyclic tidal-flat and lagoonal wackestones with local patch reefs or coralgal banks. The shelf had an ESE-WNW trend and extended from the Avesnois basin (northern France) in the west to Aachen (western Germany). The sedimentation in the Ardennes consists of shallow water regressive metric (around 5 m or less) cycles. Stromatopores, corals, brachiopods, algae and cyanobacteria are abundant. Due to this general shallow water setting, the base of the Givetian Stage has been defined by the IUGS Subcommission on Devonian Stratigraphy in a GSSP in southern Morocco referring to the first occurence of the condodont species Polygnathus hemiansatus. The conodont species Icriodus obliquimarginatus appears approximately at the same level in Belgium
A multifunctional, synthetic Gaussia princeps luciferase reporter for live imaging of Candida albicans infections
Peer reviewedPublisher PD
Microlensing of Circumstellar Disks
We investigate the microlensing effects on a source star surrounded by a
circumstellar disk, as a function of wavelength. The microlensing light curve
of the system encodes the geometry and surface brightness profile of the disk.
In the mid- and far-infrared, the emission of the system is dominated by the
thermal emission from the cold dusty disk. For a system located at the Galactic
center, we find typical magnifications to be of order 10-20% or higher,
depending on the disk surface brightness profile, and the event lasts over one
year. At around 20 microns, where the emission for the star and the disk are
comparable, the difference in the emission areas results in a chromatic
microlensing event. Finally, in the near-infrared and visible, where the
emission of the star dominates, the fraction of star light directly reflected
by the disk slightly modifies the light curve of the system which is no longer
that of a point source. In each case, the corresponding light curve can be used
to probe some of the disk properties. A fraction of 0.1% to 1% optical
microlensing events are expected to be associated with circumstellar disk
systems. We show that the lensing signal of the disk can be detected with
sparse follow-up observations of the next generation space telescopes. While
direct imaging studies of circumstellar disks are limited to the solar
neighborhood, this microlensing technique can probe very distant disk systems
living in various environments and has the potential to reveal a larger
diversity of circumstellar disks.Comment: 9 pages, 7 figures. Accepted for publication in Ap
A new approach to crystal growth of Hg1−xCdxTe by the travelling heater method (THM)
Crystal growth by the travelling heater method (THM) is reported using a source material preparation process that is different from all methods used before. Non-stoichiometric (Hg, Cd)Te melts were homogenized and quenched to prevent macroscopic segregation effects. Inclusions of excess Te were removed during a first THM pass, resulting in stoichiometric solid alloys with a shift of the mole fraction towards higher CdTe contents. The amount of the shift, dependent on the Te excess and on the equilibrium temperature of the first THM run, was calculated and taken into account in the preparation of x=0.22 and x=0.30 Hg1-xCdxTe single crystals. Source material ingots, as well as THM single crystals, were characterized with special emphasis of the compositional homogeneity. Radial as well as axial homogeneity are comparable with the best results on THM crystals reported so far. The described method can be used in growing all materials for which THM is possible. However, quantitative calculation requires the exact knowledge of the particular ternary phase diagram
Gravitational Lensing as Signal and Noise in Lyman-alpha Forest Measurements
In Lyman-alpha forest measurements it is generally assumed that quasars are
mere background light sources which are uncorrelated with the forest.
Gravitational lensing of the quasars violates this assumption. This effect
leads to a measurement bias, but more interestingly it provides a valuable
signal. The lensing signal can be extracted by correlating quasar magnitudes
with the flux power spectrum and with the flux decrement. These correlations
will be challenging to measure but their detection provides a direct measure of
how features in the Lyman-alpha forest trace the underlying mass density field.
Observing them will test the fundamental hypothesis that fluctuations in the
forest are predominantly driven by fluctuations in mass, rather than in the
ionizing background, helium reionization or winds. We discuss ways to
disentangle the lensing signal from other sources of such correlations,
including dust, continuum and background residuals. The lensing-induced
measurement bias arises from sample selection: one preferentially collects
spectra of magnified quasars which are behind overdense regions. This
measurement bias is ~0.1-1% for the flux power spectrum, optical depth and the
flux probability distribution. Since the effect is systematic, quantities such
as the amplitude of the flux power spectrum averaged across scales should be
interpreted with care.Comment: 22 pages, 8 figures; v2: references added, discussion expanded,
matches PRD accepted versio
Rapid identification of mutations in GJC2 in primary lymphoedema using whole exome sequencing combined with linkage analysis with delineation of the phenotype.
Background: Primary lymphoedema describes a chronic, frequently progressive, failure of lymphatic drainage. This disorder is frequently genetic in origin, and a multigenerational family in which eight individuals developed postnatal lymphoedema of all four limbs was ascertained from the joint Lymphoedema/Genetic clinic at St George's Hospital.
Methods: Linkage analysis was used to determine a locus, and exome sequencing was employed to look for causative variants.
Results: Linkage analysis revealed cosegregation of a 16.1 Mb haplotype on chromosome 1q42 that contained 173 known or predicted genes. Whole exome sequencing in a single affected individual was undertaken, and the search for the causative variant was focused to within the linkage interval. This approach revealed two novel non-synonymous single nucleotide substitutions within the chromosome 1 locus, in NVL and GJC2. NVL and GJC2 were sequenced in an additional cohort of individuals with a similar phenotype and non-synonymous variants were found in GJC2 in four additional families.
Conclusion: This report demonstrates the power of exome sequencing efficiently applied to a traditional positional cloning pipeline in disease gene discovery, and suggests that the phenotype produced by GJC2 mutations is predominantly one of 4 limb lymphoedema
- …