Examining queue-jumping phenomenon in heterogeneous traffic stream at signalized intersection using UAV-based data

© 2020, Springer-Verlag London Ltd., part of Springer Nature. This research presents an in-depth microscopic analysis of heterogeneous and undisciplined traffic at the signalized intersection. Traffic data extracted from the video recorded using an unmanned aerial vehicle (UAV) at an approach of a signalized intersection is analyzed to study the within green time dynamics of traffic flow. Various parameters of Wiedemann 74, Wiedemann 99, and lateral behavior models used in microscopic traffic simulation package, Vissim, are calibrated for the local heterogeneous traffic. This research is aimed at exploring the queue-jumping phenomenon of motorbikes at signalized intersections and its impact on the saturation flow rate, travel time, and delay. The study of within green time flow dynamics shows that the flow of traffic within green time is not uniform. Surprisingly, the results indicate that the traffic flow for the first few seconds of the green time is significantly higher than the remaining period of green time, which shows a contradiction to the fact that traffic flow for the first few seconds is lower due to accelerating vehicles. Mode-wise traffic counted per second shows that this anomaly is attributed to the presence of motorbikes in front of the queue. Consequently, the outputs of simulation results obtained from calibrated Vissim show that the simulated travel time for motorbikes is significantly lower than the field-observed travel times even though the average simulated traffic flow matches accurately with the field-observed traffic flow. The findings of this research highlight the need to incorporate the queue-jumping behavior of motorbikes in the microsimulation packages to enhance their capability to model heterogeneous and undisciplined traffic

Direct patterning of vortex generators on a fiber tip using a focused ion beam

The realization of spiral phase optical elements on the cleaved end of an optical fiber by focused ion beam milling is presented. A focused Ga+ ion beam with an acceleration voltage of 30 keV is used to etch continuous spiral phase plates and fork gratings directly on the tip of the fiber. The phase characteristics of the output beam generated by the fabricated structures measured via an interference experiment confirmed the presence of phase singularity in the output beam. The devices are expected to be promising candidates for all-fiber beam shaping and optical trapping applications