340 research outputs found
Planck LFI flight model feed horns
this paper is part of the Prelaunch status LFI papers published on JINST:
http://www.iop.org/EJ/journal/-page=extra.proc5/jinst The Low Frequency
Instrument is optically interfaced with the ESA Planck telescope through 11
corrugated feed horns each connected to the Radiometer Chain Assembly (RCA).
This paper describes the design, the manufacturing and the testing of the
flight model feed horns. They have been designed to optimize the LFI optical
interfaces taking into account the tight mechanical requirements imposed by the
Planck focal plane layout. All the eleven units have been successfully tested
and integrated with the Ortho Mode transducers.Comment: This is an author-created, un-copyedited version of an article
accepted for publication in JINST. IOP Publishing Ltd is not responsible for
any errors or omissions in this version of the manuscript or any version
derived from it. The definitive publisher authenticated version is available
online at 10.1088/1748-0221/4/12/T1200
The first solvent-free cyclotrimerization reaction of arylethynes catalyzed by rhodium porphyrins
Different rhodium(III) porphyrin chlorides have been used as catalysts for the cyclotrimerization of several arylethynes, giving in many cases high yields in substituted benzenes and selectivities based on the steric hindrance of the macrocycles and on the substitution of the substrates
The Planck-LFI flight model composite waveguides
The Low Frequency Instrument on board the PLANCK satellite is designed to
give the most accurate map ever of the CMB anisotropy of the whole sky over a
broad frequency band spanning 27 to 77 GHz. It is made of an array of 22
pseudo-correlation radiometers, composed of 11 actively cooled (20 K) Front End
Modules (FEMs), and 11 Back End Modules (BEMs) at 300K. The connection between
the two parts is made with rectangular Wave Guides. Considerations of different
nature (thermal, electromagnetic and mechanical), imposed stringent
requirements on the WGs characteristics and drove their design. From the
thermal point of view, the WG should guarantee good insulation between the FEM
and the BEM sections to avoid overloading the cryocooler. On the other hand it
is essential that the signals do not undergo excessive attenuation through the
WG. Finally, given the different positions of the FEM modules behind the focal
surface and the mechanical constraints given by the surrounding structures,
different mechanical designs were necessary. A composite configuration of
Stainless Steel and Copper was selected to satisfy all the requirements. Given
the complex shape and the considerable length (about 1.5-2 m), manufacturing
and testing the WGs was a challenge. This work deals with the development of
the LFI WGs, including the choice of the final configuration and of the
fabrication process. It also describes the testing procedure adopted to fully
characterize these components from the electromagnetic point of view and the
space qualification process they underwent. Results obtained during the test
campaign are reported and compared with the stringent requirements. The
performance of the LFI WGs is in line with requirements, and the WGs were
successfully space qualified.Comment: this paper is part of the Prelaunch status LFI papers published on
JINST: http://www.iop.org/EJ/journal/-page=extra.proc5/jins
Planck-LFI radiometers' spectral response
The Low Frequency Instrument (LFI) is an array of pseudo-correlation
radiometers on board the Planck satellite, the ESA mission dedicated to
precision measurements of the Cosmic Microwave Background. The LFI covers three
bands centred at 30, 44 and 70 GHz, with a goal bandwidth of 20% of the central
frequency.
The characterization of the broadband frequency response of each radiometer
is necessary to understand and correct for systematic effects, particularly
those related to foreground residuals and polarization measurements. In this
paper we present the measured band shape of all the LFI channels and discuss
the methods adopted for their estimation. The spectral characterization of each
radiometer was obtained by combining the measured spectral response of
individual units through a dedicated RF model of the LFI receiver scheme.
As a consistency check, we also attempted end-to-end spectral measurements of
the integrated radiometer chain in a cryogenic chamber. However, due to
systematic effects in the measurement setup, only qualitative results were
obtained from these tests. The measured LFI bandpasses exhibit a moderate level
of ripple, compatible with the instrument scientific requirements.Comment: 16 pages, 9 figures, this paper is part of the Prelaunch status LFI
papers published on JINST:
http://www.iop.org/EJ/journal/-page=extra.proc5/jins
High Performances Corrugated Feed Horns for Space Applications at Millimetre Wavelengths
We report on the design, fabrication and testing of a set of high performance
corrugated feed horns at 30 GHz, 70 GHz and 100 GHz, built as advanced
prototypes for the Low Frequency Instrument (LFI) of the ESA Planck mission.
The electromagnetic designs include linear (100 GHz) and dual shaped (30 and 70
GHz) profiles. Fabrication has been achieved by direct machining at 30 GHz, and
by electro-formation at higher frequencies. The measured performances on side
lobes and return loss meet the stringent Planck requirements over the large
(20%) instrument bandwidth. Moreover, the advantage in terms of main lobe shape
and side lobes levels of the dual profiled designs has been demonstrated.Comment: 16 pages, 7 figures, accepted for publication in Experimental
Astronom
The linearity response of the Planck-LFI flight model receivers
In this paper we discuss the linearity response of the Planck-LFI receivers,
with particular reference to signal compression measured on the 30 and 44 GHz
channels. In the article we discuss the various sources of compression and
present a model that accurately describes data measured during tests performed
with individual radiomeric chains. After discussing test results we present the
best parameter set representing the receiver response and discuss the impact of
non linearity on in-flight calibration, which is shown to be negligible.Comment: this paper is part of the Prelaunch status LFI papers published on
JINST: http://www.iop.org/EJ/journal/-page=extra.proc5/jinst; This is an
author-created, un-copyedited version of an article accepted for publication
in JINST. IOP Publishing Ltd is not responsible for any errors or omissions
in this version of the manuscript or any version derived from it. The
definitive publisher authenticated version is available online at
10.1088/1748-0221/4/12/T12011
Empathic and cognitive processing in people with schizophrenia: a study on an Italian sample
The aim of this study was to explore the relationships among empathy processes in terms of self-report empathy evaluation and recognition of emotional cues and Theory of Mind components. We used the Empathy Quotient – short form (EQ-s), the Pictures of Facial Affect (POFA) system, a (ToM) Irony appreciation task and the Wisconsin Card Sorting Test (WCST), respectively. The Positive and Negative Symptoms Scale (PANSS) and Global Assessment of Functioning (GAF) were also used to investigate the relationship with symptomatology and functioning. The sample consisted of 30 participants with diagnosis of schizophrenia. Our results found no significant correlations between EQ-s and other cognitive or clinical variables. PoFA total score and recognition of fear correlated with time spent to give a correct response to the ToM irony comprehension. Time spent to correctly respond to both ToM and physical vignettes correlated with negative symptoms. Positive, negative and cognitive clusters of the PANSS correlated with the GAF. The relationships we found among the considered constructs suggest that empathic processing acts on functionality improving the personal efficiency, in terms of readiness and rapidity, to cope with one’s environment, in the multifaceted social setting. Given that emotion perception in particular has been connected to social competence, independent living and community functioning, it is conceivable that emotion processing may be a potential catalyst within the mindreading process, which can have an impact both on symptomatology and social functioning
A Study on the Efficiency of Sustainable Wine Grape Vineyard Management Strategies
Crop protection strategies based on cupric products and mainly adopted in organic viticulture produce a consistent environmental impact due to the persistence of copper in soils and its negative effects on edaphic biodiversity. In this work, trials were carried out during the crop years 2018–2020 in a vineyard with an organic management by a low-copper strategy and in a conventional IPM management with an IPM strategy with reduced use of fungicides. Phytosanitary treatments have been strictly planned according to forecasting models, and fungicides have been partially substituted with substances improving the resistance mechanisms of plants. Different strategies of green manure management, in order to improve the health of vines, were also adopted. Results suggest the efficacy of the “GreenGrapes” plant protection strategy in conditions of low downy mildew pressure. Furthermore, no declines in the production quality have been recorded; conversely, the synergic effect of the green manure and the tested biostimulant substances (“GreenGrapes” protocols) and the green manure management improved yield and grape quality, compared with conventional conduction (IPM and Organic) with a grass covering
- …