173 research outputs found

    Coherent interaction of laser pulses in a resonant optically dense extended medium under the regime of strong field-matter coupling

    Full text link
    Nonstationary pump-probe interaction between short laser pulses propagating in a resonant optically dense coherent medium is considered. A special attention is paid to the case, where the density of two-level particles is high enough that a considerable part of the energy of relatively weak external laser-fields can be coherently absorbed and reemitted by the medium. Thus, the field of medium reaction plays a key role in the interaction processes, which leads to the collective behavior of an atomic ensemble in the strongly coupled light-matter system. Such behavior results in the fast excitation interchanges between the field and a medium in the form of the optical ringing, which is analogous to polariton beating in the solid-state optics. This collective oscillating response, which can be treated as successive beats between light wave-packets of different group velocities, is shown to significantly affect propagation and amplification of the probe field under its nonlinear interaction with a nearly copropagating pump pulse. Depending on the probe-pump time delay, the probe transmission spectra show the appearance of either specific doublet or coherent dip. The widths of these features are determined by the density-dependent field-matter coupling coefficient and increase during the propagation. Besides that, the widths of the coherent features, which appear close to the resonance in the broadband probe-spectrum, exceed the absorption-line width, since, under the strong-coupling regime, the frequency of the optical ringing exceeds the rate of incoherent relaxation. Contrary to the stationary strong-field effects, the density- and coordinate-dependent transmission spectra of the probe manifest the importance of the collective oscillations and cannot be obtained in the framework of the single-atom model.Comment: 10 pages, 8 figures, to be published in Phys. Rev.

    A Gcn5-Related N-Acetyltransferase (GNAT) Capable of Acetylating Polymyxin B and Colistin Antibiotics in Vitro

    Get PDF
    Deeper exploration of uncharacterized Gcn5-related N-acetyltransferases has the potential to expand our knowledge of the types of molecules that can be acylated by this important superfamily of enzymes and may offer new opportunities for biotechnological applications. While determining native or biologically relevant in vivo functions of uncharacterized proteins is ideal, their alternative or promiscuous in vitro capabilities provide insight into key active site interactions. Additionally, this knowledge can be exploited to selectively modify complex molecules and reduce byproducts when synthetic routes become challenging. During our exploration of uncharacterized Gcn5-related N-acetyltransferases from Pseudomonas aeruginosa, we identified such an example. We found that the PA3944 enzyme acetylates both polymyxin B and colistin on a single diaminobutyric acid residue closest to the macrocyclic ring of the antimicrobial peptide and determined the PA3944 crystal structure. This finding is important for several reasons. (1) To the best of our knowledge, this is the first report of enzymatic acylation of polymyxins and thus reveals a new type of substrate that this enzyme family can use. (2) The enzymatic acetylation offers a controlled method for antibiotic modification compared to classical promiscuous chemical methods. (3) The site of acetylation would reduce the overall positive charge of the molecule, which is important for reducing nephrotoxic effects and may be a salvage strategy for this important class of antibiotics. While the physiological substrate for this enzyme remains unknown, our structural and functional characterization of PA3944 offers insight into its unique noncanonical substrate specificity

    Prospective cohort study to investigate the burden and transmission of acute gastroenteritis in care homes: a study protocol.

    Get PDF
    INTRODUCTION: Noroviruses are the leading cause of acute gastroenteritis in all age groups, but illness is more severe and causes excess mortality in the elderly, particularly those in long-term care. The total burden of norovirus disease in the elderly in the UK is poorly defined; no current surveillance programmes systematically or accurately quantify norovirus infection in those living in care homes. The aim of this study is to evaluate an enhanced surveillance system for acute gastroenteritis among the elderly in care homes. METHODS AND ANALYSIS: We will conduct this prospective cohort study in care homes in North West England; residents and staff at study care homes will be asked to participate. We will prospectively enrol a cohort of participants in an enhanced surveillance system to capture the incidence of acute gastroenteritis and use multiplex PCR to detect pathogens. We will sample symptomatic and non-symptomatic participants to understand characteristics of norovirus disease and susceptibility to infection. We will generate novel data on transmission dynamics by collecting data on the pattern of interactions within care homes using electronic proximity sensors. Comparisons of outbreak and non-outbreak periods will be used to quantify the impact of norovirus outbreaks on care homes. ETHICS AND DISSEMINATION: The study has been approved by the North West-Greater Manchester South NHS Research Ethics Committee (REC Reference: 16/NW/0541). Study outputs will be disseminated through scientific conferences and peer-reviewed publications. This study will provide detailed insight on the burden and aetiology of acute gastroenteritis in care homes, in addition to generating novel data on transmission dynamics and risks. The study will identify areas for improving infection control practice and allow more accurate modelling of the introduction of interventions such as vaccination

    The ecology of chronic wasting disease in wildlife

    Get PDF
    This work is licensed under a Creative Commons Attribution 4.0 International License.Prions are misfolded infectious proteins responsible for a group of fatal neurodegenerative diseases termed transmissible spongiform encephalopathy or prion diseases. Chronic Wasting Disease (CWD) is the prion disease with the highest spillover potential, affecting at least seven Cervidae (deer) species. The zoonotic potential of CWD is inconclusive and cannot be ruled out. A risk of infection for other domestic and wildlife species is also plausible. Here, we review the current status of the knowledge with respect to CWD ecology in wildlife. Our current understanding of the geographic distribution of CWD lacks spatial and temporal detail, does not consider the biogeography of infectious diseases, and is largely biased by sampling based on hunters’ cooperation and funding available for each region. Limitations of the methods used for data collection suggest that the extent and prevalence of CWD in wildlife is underestimated. If the zoonotic potential of CWD is confirmed in the short term, as suggested by recent results obtained in experimental animal models, there will be limited accurate epidemiological data to inform public health. Research gaps in CWD prion ecology include the need to identify specific biological characteristics of potential CWD reservoir species that better explain susceptibility to spillover, landscape and climate configurations that are suitable for CWD transmission, and the magnitude of sampling bias in our current understanding of CWD distribution and risk. Addressing these research gaps will help anticipate novel areas and species where CWD spillover is expected, which will inform control strategies. From an ecological perspective, control strategies could include assessing restoration of natural predators of CWD reservoirs, ultrasensitive CWD detection in biotic and abiotic reservoirs, and deer density and landscape modification to reduce CWD spread and prevalence

    Association of a Bovine Prion Gene Haplotype with Atypical BSE

    Get PDF
    Background: Atypical bovine spongiform encephalopathies (BSEs) are recently recognized prion diseases of cattle. Atypical BSEs are rare; approximately 30 cases have been identified worldwide. We tested prion gene (PRNP) haplotypes for an association with atypical BSE. Methodology/Principle Findings: Haplotype tagging polymorphisms that characterize PRNP haplotypes from the promoter region through the three prime untranslated region of exon 3 (25.2 kb) were used to determine PRNP haplotypes of six available atypical BSE cases from Canada, France and the United States. One or two copies of a distinct PRNP haplotype were identified in five of the six cases (p = 1.36×10-4, two-tailed Fisher’s exact test; CI95% 0.263–0.901, difference between proportions). The haplotype spans a portion of PRNP that includes part of intron 2, the entire coding region of exon 3 and part of the three prime untranslated region of exon 3 (13 kb). Conclusions/Significance: This result suggests that a genetic determinant in or near PRNP may influence susceptibility of cattle to atypical BSE

    Study of the properties of thermoset materials derived from epoxidized soybean oil and protein fillers

    Full text link
    [EN] Novel bio-based thermoset formulations were prepared by using epoxidized soybean oil (ESBO), nadic methyl anhydride as a hardener and with different types of proteins as fillers. In the first part of the study, the effect of the protein-type (wheat gluten, soy protein, casein and ovalbumin) on cured ESBO materials was investigated. Thermal and mechanical properties were characterized by flexural tests, Shore D hardness, Charpy impact tests, Vicat softening temperature and heat deflection temperature. In addition, a study of the morphology of fractured surfaces by scanning electron microscopy was carried out. In general, the addition of protein-based fillers improved the mechanical and thermal properties. It was found that the highest increase of thermal and mechanical properties was achieved by ovalbumin. In the second part of the work, the effect of the total amount of ovalbumin filler was studied. Bio-based thermoset materials from ESBO and 15 wt % ovalbumin improved flexural modulus more than 150 % when compared to the unfilled material. Similar evolution was observed for other mechanical properties. Moreover, the brittleness of this composition was the minimum from the studied systems. A direct relationship between energy absorption capacity and morphologies of the failure surface was evidenced by SEM.This work is a part of the project IPT-310000-2010-037,"ECOTEXCOMP: Research and development of textile structures useful as reinforcement of composite materials with marked ecological character" funded by the "Ministerio de Ciencia e Innovacion", with an aid of 189540.20 euros, within the "Plan Nacional de Investigacion Cientifica, Desarrollo e Innovacion Tecnologica 2008-2011" and funded by the European Union through FEDER funds, Technology Fund 2007-2013, "Operational Programme on R+D+I for and on behalf of the companies". Also, Generalitat Valenciana ACOMP/2012/087 is acknowledged for financial support.Fombuena Borrás, V.; Sánchez Nacher, L.; Samper Madrigal, MD.; Juárez Varón, D.; Balart Gimeno, RA. (2013). Study of the properties of thermoset materials derived from epoxidized soybean oil and protein fillers. Journal of the American Oil Chemists' Society. 90(3):449-457. https://doi.org/10.1007/s11746-012-2171-2S449457903Alonso MV, Oliet M, Garcia J, Rodriguez F, Echeverria J (2006) Gelation and isoconversional kinetic analysis of lignin-phenol-formaldehyde resol resins cure. Chem Eng J 122:159–166Altuna FI, Esposito LH, Ruseckaite RA, Stefani PM (2011) Thermal and mechanical properties of anhydride-cured epoxy resins with different contents of bio-based epoxidized soybean oil. J Appl Polym Sci 120:789–798Boquillon N, Fringant C (2000) Polymer networks derived from curing of epoxidised linseed oil: influence of different catalysts and anhydride hardeners. Polymer 41:8603–8613Boquillon N, Elbez G, Schonfeld U (2004) Properties of wheat straw particleboards bonded with different types of resin. J Wood Sci 50:230–235Chakrapani S, Crivello JV (1998) Synthesis and photoinitiated cationic polymerization of epoxidized castor oil and its derivatives. J Macromol Sci-Pure Appl Chem A35:1–20Chen F, Zhang JW (2009) A new approach for morphology control of poly(butylene adipate-co-terephthalate) and soy protein blends. Polymer 50:3770–3777Cuq B, Contard N, Guilbert S (1998) Proteins as agricultural polymers for packaging production. Am Assoc Cereal Chem 75:1–9Czub P (2006) Application of modified natural oils as reactive diluents for epoxy resins. Macromol Symp 242:60–64DdS Martini, Braga BA, Samios D (2009) On the curing of linseed oil epoxidized methyl esters with different cyclic dicarboxylic anhydrides. Polymer 50:2919–2925Dogan E, Kuesefoglu S (2008) Synthesis and in situ foaming of biodegradable malonic acid ESO polymers. J Appl Polym Sci 110:1129–1135Espinosa-Perez J, Wiesenborn DP, Tostenson K, Ulven CA, Tatlari M (2007) Preparation and partial characterization of canola-based epoxy resins for bio-based plastic composites. ASABE Annual International Meeting, 076079, Minneapolis, MNJin H, Zhang L, Chen F (2003) Effects of lignin as a filler on properties of soy protein plastics. I Lignosulfonate. J Appl Polym Sci 88:3284–3290Liu ZS, Erhan SZ, Calvert PD (2007) Solid freeform fabrication of epoxidized soybean oil/epoxy composite with bis or polyalkyleneamine curing agents. Compos Part A Appl Sci Manuf 38:87–93Matejka L, Lovy J, Pokorny S, Bouchal K, Dusek K (1983) Curing epoxy-resins with anhydrides—model reactions and reaction-mechanism. J Polym Sci Part A Polym Chem 21:2873–2885Miyagawa H, Mohanty AK, Drzal LT, Misra M (2005) Nanocomposites from bio-based epoxy and single-wall carbon nanotubes: synthesis, and mechanical and thermo-physical properties evaluation. Nanotechnology 16:118–124Mohamed A, Finkenstadt VL, Gordon SH, Palmquist DE (2010) Thermal and mechanical properties of compression-molded pMDI-reinforced PCL/gluten composites. J Appl Polym Sci 118:2778–2790Montero de Espinosa L, Ronda JC, Galià M, Cádiz V (2008) A new enone-containing triglyceride derivative as precursor of thermosets from renewable resources. J Polym Sci Part A Polym Chem 46:6843–6850Park SJ, Jin FL, Lee JR (2004) Synthesis and thermal properties of epoxidized vegetable oil. Macromol Rapid Commun 25:724–727Pfister DP, Baker RJ, Henna HP, Lu Y, Larock CR (2008) Preparation and properties of tung oil-based composites using spent germ as a natural filler. J Appl Polym Sci 108:3618–3625Reiznautt QB, Garcia ITS, Samios D (2009) Oligoesters and polyesters produced by the curing of sunflower oil epoxidized biodiesel with cis-cyclohexane dicarboxylic anhydride: synthesis and characterization. Mater Sci Eng C Mater Biol Appl 29:2302–2311Rüsch Gen Klaas M, Warwel S (1999) Complete and partial epoxidation of plant oils by lipase-catalyzed perhydrolysis. Ind Crops Prod 9:125–132Sailaja RRN, Girija BG, Madras G, Balasubramanian N (2008) Effect of compatibilization on mechanical and thermal properties of polypropylene—soy flour composites. J Mater Sci 43:64–67Samper MD, Fombuena V, Boronat T, García-Sanoguera D, Balart R (2012) Thermal and mechanical characterization of epoxy resins (ELO and ESO) cured with anhydrides. J Am Oil Chem Soc 89(8):1521–1528Sharma S (2008) Fabrication and characterization of polymer blends and composites derived from biopolymers. Philosophy Materials Science and Engineering. Graduate School of Clemson University, ClemsonSharma BK, Liu Z, Adhvaryu A, Erhan SZ (2008) One-pot synthesis of chemically modified vegetable oils. J Agric Food Chem 56:3049–3056Sue HJ, Wang S, Jane J (1997) Morphology and mechanical behaviour of engineering soy plastics. J Polym 38:5035Wang S, Sue HJ, Jane J (1996) Effects of polyhydric alcohols on the mechanical properties of soy protein plastics. J Macromol Sci Pure Appl Chem A33:557–569Wazzan AA, Al-Turaif HA, Abdelkader AF (2006) Influence of submicron TiO2 particles on the mechanical properties and fracture characteristics of cured epoxy resin. Polym Plastics Technol Eng 45:1155–116
    • …
    corecore