5 research outputs found

    Solid-State NaBH<sub>4</sub>/Co Composite as Hydrogen Storage Material: Effect of the Pressing Pressure on Hydrogen Generation Rate

    No full text
    A solid-state NaBH4/Co composite has been employed as a hydrogen-generating material, as an alternative to sodium borohydride solutions, in the long storage of hydrogen. Hydrogen generation begins in the presence of cobalt-based catalysts, immediately after water is added to a NaBH4/Co composite, as a result of sodium borohydride hydrolysis. The hydrogen generation rate has been investigated as a function of the pressure used to press hydrogen-generating composites from a mechanical mixture of the hydride and cobalt chloride hexahydrate. The hydrogen generation rate was observed to increase with the increase of this pressure. Pre-reduction of the cobalt chloride, using a sodium borohydride solution, leveled this dependence with a two-fold decrease in the gas generation rate. According to TEM and XPS data, oxidation of the particles of the pre-reduced cobalt catalyst took place during preparation of the composites, and it is this oxidation that appears to be the main reason for its low activity in sodium borohydride hydrolysis

    Solvent-Free Method for Nanoparticles Synthesis by Solid-State Combustion Using Tetra(Imidazole)Copper(II) Nitrate

    No full text
    The development of solvent-free techniques for nanoparticles synthesis is one of the challenges of Green chemistry. In this work, the principled opportunity to obtain copper-containing nanosized particles without use of any solvents was shown. The copper complexes were prepared as precursors by the melting-assisted solvent-free synthesis. The formation of tetra(imidazole)copper(II) nitrate complex was confirmed by XRD, elemental analysis, FTIR spectroscopy, and thermal analysis. It was noted that their thermal decomposition occurs in two stages: (I) the low-temperature step may be related to redox interaction between organic ligands and nitrate-anions; (II) the high-temperature step may be related to the oxidation of the products of incomplete imidazole decomposition. TEM and XRD studies of solid products of complex combustion have shown that they are oxides with particle size less than 40 nm. Thus, the combustion of [Cu(Im)4](NO3)2 complex under air can be considered as a new approach to prepare nanosized particles of copper oxides without the use of solvents

    Solvent-Free Method for Nanoparticles Synthesis by Solid-State Combustion Using Tetra(Imidazole)Copper(II) Nitrate

    No full text
    The development of solvent-free techniques for nanoparticles synthesis is one of the challenges of Green chemistry. In this work, the principled opportunity to obtain copper-containing nanosized particles without use of any solvents was shown. The copper complexes were prepared as precursors by the melting-assisted solvent-free synthesis. The formation of tetra(imidazole)copper(II) nitrate complex was confirmed by XRD, elemental analysis, FTIR spectroscopy, and thermal analysis. It was noted that their thermal decomposition occurs in two stages: (I) the low-temperature step may be related to redox interaction between organic ligands and nitrate-anions; (II) the high-temperature step may be related to the oxidation of the products of incomplete imidazole decomposition. TEM and XRD studies of solid products of complex combustion have shown that they are oxides with particle size less than 40 nm. Thus, the combustion of [Cu(Im)4](NO3)2 complex under air can be considered as a new approach to prepare nanosized particles of copper oxides without the use of solvents

    CO<sub>2</sub> Methanation: Solvent-Free Synthesis of Nickel-Containing Catalysts from Complexes with Ethylenediamine

    No full text
    CO2 methanation was studied in the presence of nickel catalysts obtained by the solid-state combustion method. Complexes with a varying number of ethylenediamine molecules in the coordination sphere of nickel were chosen as the precursors of the active component of the catalysts. Their synthesis was carried out without the use of solvents, which made it possible to avoid the stages of their separation from the solution and the utilization of waste liquids. The composition and structure of the synthesized complexes were confirmed by elemental analysis, IR spectroscopy, powder XRD and XPS methods. It was determined that their thermal decomposition in the combustion wave proceeds in multiple stages with the formation of NiO and Ni(OH)2, which are reduced to Ni0. Higher ethylenediamine content in the complex leads to a higher content of metal in the solid products of combustion. However, different ratios of oxidized and reduced forms of nickel do not affect the initial activation temperature of nickel catalysts in the presence of CO2. It was noted that, after activation, the sample obtained from [Ni(C2H8N2)2](NO3)2 exhibited the highest activity in CO2 methanation. Thus, this complex is a promising precursor for CO2 methanation catalysts, and its synthesis requires only a small amount of ethylenediamine

    Solvent-Free Synthesis of Nickel Nanoparticles as Catalysts for CO<sub>2</sub> Hydrogenation to Methane

    No full text
    The solid-state combustion method was used to prepare nickel-based catalysts for CO2 hydrogenation from [Ni(C3H4N2)6](NO3)2 and [Ni(C3H4N2)6](ClO4)2. These complexes were synthesized by adding nickel nitrate and perchlorate to melted imidazole. The composition and structure of the obtained complexes was confirmed by ATR FTIR, powder XRD, and elemental analysis. The stages of thermal decomposition of the complexes and their kinetic parameters were established. It was found that incomplete gasification of more thermostable Ni(C3H4N2)6](ClO4)2 led to the formation of carbon, nitrogen, and chlorine impurities. According to powder XRD and XPS, the solid products of gasification of both complexes consist of NiO and Ni0 covered with nickel hydroxide and/or a carbonate layer. In the case of the sample prepared from [Ni(C3H4N2)6](ClO4)2, this layer was pronounced. Therefore, it limits the nickel reduction in the reaction medium of CO2 hydrogenation, even at 450 °C. The surface of the sample prepared from [Ni(C3H4N2)6](NO3)2 contains nickel oxide, which is easily reduced. So, the catalyst active phase is already formed at 250 °C in the presence of CO2 and efficiently catalyzes CO2 hydrogenation as the temperature increases. Therefore, [Ni(C3H4N2)6](NO3)2 is a promising precursor for the CO2 hydrogenation catalyst, and its solvent-free synthesis follows Green Chemistry principles
    corecore