216 research outputs found

    The oxidative dehydrogenation of methanol to formaldehyde over silver catalysts in relation to the oxygen-silver interaction

    Get PDF
    The properties of silver in the oxidative dehydrogenation of methanol were studied in a flow reactor under near industrial conditions. The influences of temperature, concentration of both reactants, gas velocity, space velocity, the form of the silver catalyst and surface composition of the catalyst were studied. A model for the reaction is proposed which is based on the experimental observations and on the nature of the interaction of silver with oxygen. It issuggested that different oxygen species on the silver surface play different roles in the reactions to CO, CO2 and H2CO. Gas phase reactions only contribute to the conversion to CO

    The silver-oxygen interaction in relation to oxidative dehydrogenation of methanol

    Get PDF
    The interaction of unsupported silver with oxygen at atmospheric pressure and at temperatures between 100 and 600°C has been studied using temperature programmed reduction and desorption experiments with temperatures ranging up to 900°C. In addition, the interaction of an oxygen-loaded silver surface with methanol has been studied using both these techniques and temperature programmed reaction. It appears that the silver-oxygen chemistry is influenced strongly by hydrogen dissolved in the silver during the pretreatment of the catalyst, the hydrogen giving rise to a new type of sub-surface species, possibly sub-surface OH groups, and also to an increase of the amount of sub-surface oxygen formed. Sub-surface oxygen can be converted into a strongly bound species that is not present to a measurable extent after normal oxidation. Defects, partly generated as a consequence of the interaction between oxygen and hydrogen in the sub-surface region of the silver, probably generate this strongly bound oxygen species. The presence of the sub-surface oxygen species appears to activate the silver for methanol dehydrogenation

    The influence of hydrogen treatment and catalyst morphology on the interaction of oxygen with a silver catalyst

    Get PDF
    The interaction of an unsupported silver catalyst which had been pretreated by hydrogen at various temperatures with oxygen at 210°C has been studied using Temperature Programmed Reduction (TPR) over a temperature range up to 900°C. Hydrogen treatment at 500°C or above before the oxidation step causes the formation of extra species, thought to be OH groups in the sub-surface of the sample. A peak in the spectra attributable to oxygen strongly bound in the vicinity of surface defects is found to be dependent on the surface roughness and grain size of the silver sample used; hydrogen pretreatment causes the strongly bound oxygen in the vicinity of surface defects to be converted to sub-surface OH. It is also shown that the TPR measurements themselves influence the morphology of the sample and that these changes are comparable with structural changes which occur during the use of the catalysts for oxidative dehydrogenation of methanol. It is suggested that these structural changes are caused by the interaction of the sub-surface of the silver with both oxygen and hydrogen

    The interaction between silver and N2O in relation to the oxidative dehydrogenation of methanol

    Get PDF
    The interaction of N2O with pure silver at temperatures up to 900 °C has been studied using temperature-programmed reduction and desorption; the interaction is compared with that of oxygen with silver. The effect of addition of N2O, as well as of the complete replacement of oxygen by N2O, on the oxidative dehydrogenation of methanol on a silver catalyst has also been studied. It was found that the interaction of silver with N2O was much slower than that of O2; no atomic surface oxygen species were observed, probably because the formation of subsurface species was not complete; selective adsorption appears to take place on the surface defects and grain boundaries involved in the formation of the subsurface species. Addition of small amounts of N2O to the reaction mixture (CH3OH + O2) for the oxidative dehydrogenation of methanol had almost no influence on the conversion or on the product distribution measured. However, the conversions were considerably lower when oxygen was totally replaced by N2O; only above 600 °C was the N2O exhausted. At the same level of conversion of the methanol, the amount of CO2 produced was lowered compared to the case of O2. This is in agreement with the suggestion that CO2 is formed via weakly bound surface oxygen

    Influence of phosphorus and potassium impurities on the properties of vanadium oxide supported on TiO2

    Get PDF
    The catalytic properties of vanadium oxide catalysts supported on TiO2 from Tioxide were strongly affected by phosphorus and potassium, present as impurities in the TiO2 support. The effects observed were stronaly dependent on the type of hydrocarbon oxidised. In the oxidation of toluene to benzoic acid the impurities had a large negative influence on the activity and maximum yield. For the oxidation of o-xylene to ohthalic anhydride this negative effect was only observed at relat- ively low vanadium contents. At higher contents (above monolayer coverage) improved catalytic properties were obtained for catalysts supported on the contaminated TiO2 support. When the phosphorus and potassium impurities were both largely removed by extraction with water optimum catalytic behaviour was achieved at much lower vanadium contents in both oxidation reactions. The effect of each of the two impurities separately was also investigated using vanadium oxide catalysts deliberately contaminated with various amounts of either phosphorus or potassium. From the results of the catalytic oxidation experiments it was concluded that the addition of phosphorus resulted in an increase of the surface acidity of vanadium oxide/TiO2 catalysts. The effect of potassium was much larger and was attributed to an alternation of the nature of the reactive sites, possibly because of the formation of amorphous bronzes

    Nickel catalysts for internal reforming in molten carbonate fuel cells

    Get PDF
    Natural gas may be used instead of hydrogen as fuel for the molten carbonate fuel cell (MCFC) by steam reforming the natural gas inside the MCFC, using a nickel catalyst (internal reforming). The severe conditions inside the MCFC, however, require that the catalyst has a very high stability. In order to find suitable types of nickel catalysts and to obtain more knowledge about the deactivation mechanism(s) occurring during internal reforming, a series of nickel catalysts was prepared and subjected to stability tests at 973 K in an atmosphere containing steam and lithium and potassium hydroxide vapours. All the catalysts prepared showed a significant growth of the nickel crystallites during the test, especially one based on ¿-Al2O3 and a coprecipitated Ni/Al2O3 sample having a very high nickel content. However, this growth of nickel crystallites only partially explained the very strong deactivation observed in most cases. Only a coprecipitated nickel/alumina catalyst with high alumina content and a deposition-precipitation catalyst showed satisfactory residual activities. Addition of magnesium or lanthanum oxide to a coprecipitated nickel/alumina catalyst decreased the stability.\ud \ud Adsorption and retention of the alkali was the most important factor determining the stability of a catalyst in an atmosphere containing alkali hydroxides. This is because the catalyst bed may remain active if a small part of the catalyst bed retains all the alkali
    corecore