129 research outputs found

    Resultados de las campañas oceanográficas Mar del Plata I-V. Contribución al trazado de una carta bionómica del área de Mar del Plata. Las asociaciones del sistema litoral entre 12 y 70 m. de profundidad

    Get PDF
    Under the name of Campañas Oceanográficas Mar del Plata I-V, five oceanographic surveys were done together with the Servicio de Hidrografía Naval, in the area between Faro Querandí and Mar del Sur. (Argentina, Province of Buenos Aires). A total of 82 oceanographic stations were covered and physical-chemical (temperature, oxygen, salinity determinations), sedimental and biological samplings (plankton and bottom organisms) were obtained. Bottom organisms collections were made with a conventional type of dredge 1 meter wide and 46 cm high grame with a net of thin mesh 2,60 m. Macrofauna components were only considered. This data allowed us to attempt a bionomic and litological chart of the studied area.As the sediments seem to have great heterogeneity over the hole studied area, in many cases the bottom fauna collections belonged to defferent associations which made difficult the limitations of areas covered by each one. Anyway we can draw that we are very near the minimun limits

    Sobre el ecosistema de las aguas litorales de Mar del Plata. Niveles tróficos y cadenas alimentarias pelágicos demersales y bentónicos-demersales

    Get PDF
    The present paper deals with the trophic relationships of the communities of the coastal fishing area of Mar del Plata (Argentine). Different trophic levels of two main food chains (pelagic-demersal and benthic-demersal)were established. There are connections between both chains through certain species of invertebrates and fishes. This first try to establish the trophic relationships of our most important littoral communities, aims to set the preliminary bases for future energetic flow studies through the trophic web that gives a real economic importance to this productive area. (Document contains 45 pages

    Non-Fermi liquid regime of a doped Mott insulator

    Full text link
    We study the doping of a Mott insulator in the presence of quenched frustrating disorder in the magnetic exchange. A low doping regime δ<J/t\delta<J/t is found, in which the quasiparticle coherent scale is low : ϵF=J(δ/δ)2\epsilon_F^* = J (\delta/\delta^*)^2 with δ=J/t\delta^*=J/t (the ratio of typical exchange to hopping). In the ``quantum critical regime'' ϵF<T<J\epsilon_F^*<T<J, several physical quantities display Marginal Fermi Liquid behaviour : NMR relaxation time 1/T1const.1/T_1\sim const., resistivity ρdc(T)T\rho_{dc}(T) \propto T, optical lifetime \tau_{opt}^{-1}\propto \omega/\ln(\omega/\epstar) and response functions obey ω/T\omega/T scaling, e.g. Jqχ(q,ω)tanh(ω/2T)J\sum_q \chi''(q,\omega) \propto \tanh (\omega/2T). In contrast, single-electron properties display stronger deviations from Fermi liquid theory in this regime with a ω\sqrt{\omega} dependence of the inverse single-particle lifetime and a 1/ω1/\sqrt{\omega} decay of the photoemission intensity. On the basis of this model and of various experimental evidence, it is argued that the proximity of a quantum critical point separating a glassy Mott-Anderson insulator from a metallic ground-state is an important ingredient in the physics of the normal state of cuprate superconductors (particularly the Zn-doped materials). In this picture the corresponding quantum critical regime is a ``slushy'' state of spins and holes with slow spin and charge dynamics responsible for the anomalous properties of the normal state.Comment: 40 pages, RevTeX, including 13 figures in EPS. v2 : minor changes, some references adde

    International Survey on Mechanical Ventilation During Extracorporeal Membrane Oxygenation

    Get PDF
    The optimal ventilation strategy for patients on extracorporeal membrane oxygenation (ECMO) remains uncertain. This survey reports current mechanical ventilation strategies adopted by ECMO centers worldwide. An international, multicenter, cross-sectional survey was conducted anonymously through an internet-based tool. Participants from North America, Europe, Asia, and Oceania were recruited from the extracorporeal life support organization (ELSO) directory. Responses were received from 48 adult ECMO centers (response rate 10.6%). Half of these had dedicated ventilation protocols for ECMO support. Pressure-controlled ventilation was the preferred initial ventilation mode for both venovenous ECMO (VV-ECMO) (60%) and venoarterial ECMO (VA-ECMO) (34%). In VV-ECMO, the primary goal was lung rest (93%), with rescue therapies commonly employed, especially neuromuscular blockade (93%) and prone positioning (74%). Spontaneous ventilation was typically introduced after signs of pulmonary recovery, with few centers using it as the initial mode (7%). A quarter of centers stopped sedation within 3 days after ECMO initiation. Ventilation strategies during VA-ECMO focused less on lung-protective goals and transitioned to spontaneous ventilation earlier. Ventilation strategies during ECMO support differ considerably. Controlled ventilation is predominantly used initially to provide lung rest, often facilitated by sedation and neuromuscular blockade. Few centers apply "awake ECMO" early during ECMO support, some utilizing partial neuromuscular blockade.</p

    International Survey on Mechanical Ventilation During Extracorporeal Membrane Oxygenation

    Get PDF
    The optimal ventilation strategy for patients on extracorporeal membrane oxygenation (ECMO) remains uncertain. This survey reports current mechanical ventilation strategies adopted by ECMO centers worldwide. An international, multicenter, cross-sectional survey was conducted anonymously through an internet-based tool. Participants from North America, Europe, Asia, and Oceania were recruited from the extracorporeal life support organization (ELSO) directory. Responses were received from 48 adult ECMO centers (response rate 10.6%). Half of these had dedicated ventilation protocols for ECMO support. Pressure-controlled ventilation was the preferred initial ventilation mode for both venovenous ECMO (VV-ECMO) (60%) and venoarterial ECMO (VA-ECMO) (34%). In VV-ECMO, the primary goal was lung rest (93%), with rescue therapies commonly employed, especially neuromuscular blockade (93%) and prone positioning (74%). Spontaneous ventilation was typically introduced after signs of pulmonary recovery, with few centers using it as the initial mode (7%). A quarter of centers stopped sedation within 3 days after ECMO initiation. Ventilation strategies during VA-ECMO focused less on lung-protective goals and transitioned to spontaneous ventilation earlier. Ventilation strategies during ECMO support differ considerably. Controlled ventilation is predominantly used initially to provide lung rest, often facilitated by sedation and neuromuscular blockade. Few centers apply "awake ECMO" early during ECMO support, some utilizing partial neuromuscular blockade.</p

    Comparison of Physical-chemical and Mechanical Properties of Chlorapatite and Hydroxyapatite Plasma Sprayed Coatings

    Get PDF
    Chlorapatite can be considered a potential biomaterial for orthopaedic applications. Its use as plasma-sprayed coating could be of interest considering its thermal properties and particularly its ability to melt without decomposition unlike hydroxyapatite. Chlorapatite (ClA) was synthesized by a high-temperature ion exchange reaction starting from commercial stoichiometric hydroxyapatites (HA). The ClA powder showed similar characteristics as the original industrial HA powder, and was obtained in the monoclinic form. The HA and ClA powders were plasma-sprayed using a low-energy plasma spraying system with identical processing parameters. The coatings were characterized by physical-chemical methods, i.e. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy, including distribution mapping of the main phases detected such as amorphous calcium phosphate (ACP), oxyapatite (OA), and HA or ClA. The unexpected formation of oxyapatite in ClA coatings was assigned to a side reaction with contaminating oxygenated species (O2, H2O). ClA coatings exhibited characteristics different from HA, showing a lower content of oxyapatite and amorphous phase. Although their adhesion strength was found to be lower than that of HA coatings, their application could be an interesting alternative, offering, in particular, a larger range of spraying conditions without formation of massive impurities.This study was carried out under a MNT ERA-Net Project named NANOMED. The authors gratefully thank the Midi-Pyrénées region (MNT ERA Net Midi-Pyrénées Région, NANOMED2 project) and the Institute National Polytechnique de Toulouse (BQR INPT 2011, BIOREVE project) for supporting this research work, especially the financial support for research carried out in the CIRIMAT and the LGP laboratories (France), and the Basque government and Tratamientos Superficiales Iontech, S.A. for their financial and technical support under the IG-2007/0000381 grant for the development of the LEPS device and deposition of the coatings carried out in Inasmet-Tecnalia. The French industrial collaborators (TEKNIMED SA and 2PS SA) were financed by the OSEO programs
    corecore